journal article·2015-05Open access

Laser Induced Forward Transfer for front contact improvement in silicon heterojunction solar cells

M. Colina, A. Morales-Vilches, C. Voz, I. Martín, P. Ortega, A. Orpella, G. López, R. Alcubilla

Abstract

In this work the Laser Induced Forward Transfer (LIFT) technique is investigated to create n-doped regions on p-type c-Si substrates. The precursor source of LIFT consisted in a phosphorous-doped hydrogenated amorphous silicon layer grown by Plasma Enhanced Chemical Vapor Deposition (PECVD) onto a transparent substrate. Transfer of the doping atoms occurs when a sequence of laser pulses impinging onto the doped layer propels the material toward the substrate. The laser irradiation not only transfers the doping material but also produces a local heating that promotes its diffusion into the substrate. The laser employed was a 1064 nm, lamp-pumped system, working at pulse durations of 100 and 400 ns. In order to obtain a good electrical performance a comprehensive optimization of the applied laser fluency and number of pulses was carried out. Subsequently, arrays of n + p local junctions were created by LIFT and the resulting J – V curves demonstrated the formation of good quality n+ regions. These structures were finally incorporated to enhance the front contact in conventional silicon heterojunction solar cells leading to an improvement of conversion efficiency
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Laser forward transfer of electronic and power generating material
2. Use of laser direct-write in microelectronics assembly10.2961/jlmn.2007.01.0019 ↗
3. Physical model for the laser induced forward transfer process10.1063/1.3685469 ↗
4. Laser induced forward transfer of conducting polymers10.2478/s11772-010-0045-4 ↗
5. The optimisation of the laser-induced forward transfer process for fabrication of polyfluorene-based organic light-emitting diode pixels10.1016/j.apsusc.2012.11.076 ↗
6. Laser transfer doping for contacting n-type crystalline Si solar cells10.1002/pssa.201127046 ↗
7. Direct writing technology – advances and developments10.1016/j.cirp.2008.09.006 ↗
8. High-efficiency hit solar cell on thin (<100μm) silicon wafer
9. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
10. Self-doping laser transferred contacts for c-Si solar cells
11. Low temperature laser metallization for silicon solar cells10.1016/j.egypro.2011.06.181 ↗
12. Laser ablation for analytical sampling: what can we learn from modeling10.1016/j.sab.2003.08.004 ↗
13. Laser chemical metal deposition for silicon solar cell metallization10.1016/j.egypro.2012.05.007 ↗
14. Silicon solar cells based on all-laser-transferred contacts
15. Recovery of indium-tin-oxide/silicon heterojunction solar cells by thermal annealing10.1016/j.egypro.2013.12.002 ↗
16. Progress in silicon heterojunction solar cell fabrication with rear laser-fired contacts
17. Laser-fired contact optimization in c-Si solar cells10.1002/pip.1115 ↗
18. Optimization of laser processes for local rear contacting of passivated silicon solar cells10.1016/j.egypro.2013.12.033 ↗
19. Simple technique for measurements of pulsed Gaussian-beam spot size10.1364/OL.7.000196 ↗
20. Influence of wavelength on laser doping and laser firing contact processes for crystal silicon solar cells10.1117/12.929456 ↗