Modification of laser induced damage threshold of ZrO2 thin films by using time–temperature gradient annealing
Source abstract
Abstract
Abstract As a result of using time–temperature gradient annealing, the structural and optical properties and hence, thermal properties of ZrO 2 thin films deposited by electron gun, enhanced considerably compared with rapid thermal annealing. Also, it can be seen time- temperature gradient annealing caused to decrease the total stress and number of thermal barrier along the film. Therefore, according to our experimental results, which is agree with theoretical analysis, the laser induced damage threshold of ZrO 2 films can be enhanced significantly compared with rapid annealing procedure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Roughness and Optical Measurements · Laser Material Processing Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Soileau · 2008
2. Hacker · 1996
3. Wood · 2008
4. Laser conditioning of optical thin films
5. Laser conditioning of LaF3/MgF2 dielectric coatings at 248nm10.1364/AO.35.005613 ↗
6. Modification of zirconium oxide film microstructure during post-deposition annealing10.1016/S0042-207X(03)00111-8 ↗
7. Annealing effect on the laser induced damage resistance of ZrO2 films in vacuum10.1364/AO.48.005459 ↗
8. Annealing effect on the optical properties and laser induced damage resistance of solgel–derived ZrO2 films10.1364/JOSAB.24.001066 ↗
9. Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region10.1364/AO.41.003211 ↗
10. Annealing effects on structure and laser–induced damage threshold of Ta2O5/SiO2 dielectric mirrors10.1016/S0169-4332(03)00153-3 ↗
11. High temperature annealing effect on structure, optical property and laser–induced damage threshold of Ta2O5 films10.1016/j.apsusc.2008.04.034 ↗
12. Influence of annealing temperature on the properties of titanium oxide thin film10.1016/S0169-4332(03)00569-5 ↗
13. Träger · 200710.1007/978-0-387-30420-5 ↗
14. Comparison of optical coatings deposited by novel physical and chemical techniques
15. Relationship of the total integrated scattering from multilayer-coated optics to angle of incidence, polarization, correlation length, and roughness cross-correlation properties10.1364/AO.22.003207 ↗
16. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
17. Klug · 1974
18. Kriegel · 1961
19. The effect of porosity on the laser induced damage threshold of TiO2 and ZrO2 single layer films10.1016/j.optlastec.2010.03.008 ↗
20. The role of thermal conductivity in the pulsed laser damage sensitivity of optical thin films10.1016/0040-6090(88)90425-7 ↗
21. Model for laser damage dependence on thin-film morphology10.1364/AO.32.003925 ↗
22. Temperature field analysis of single layer TiO2 film components induced by long-pulse and short-pulse lasers10.1364/AO.50.003435 ↗
23. Pulsed laser induced damage model of optical coatings with a spherical absorbing inclusion
24. Effect of anisotropic stress on thin films damage threshold
25. Pulse-shape and pulse-length scaling of ns pulse laser damage threshold due to rate limiting by thermal conduction
26. Role of Cracks, pores, and absorbing inclusions on laser induced damage threshold at surfaces of transparent dielectrics10.1364/AO.12.000661 ↗
27. Surface roughness and laser damage threshold10.1109/JQE.1977.1069342 ↗