3D/2D passivation as a secret to success for polycrystalline thin-film solar cells
Source abstract
Abstract
Summary Polycrystalline photovoltaic materials offer low costs and good scalability; however, grain boundaries in these materials are extended defects, which can drastically increase carrier recombination. Interestingly, three leading polycrystalline thin-film technologies—cadmium telluride (CdTe), CuIn1-xGaxSe2 (CIGS), and perovskite solar cells (PSCs)—passivate absorber surfaces in the same way: via formation of low-dimensional, typically two-dimensional (2D), van der Waals materials. This has primarily occurred serendipitously through process optimization, but in some cases, 2D capping layers are intentionally incorporated to improve device performance. Here, evidence compiled from the literature, supplemented with new data where necessary, is presented to illustrate the existence of 3D/2D interfaces in CdTe, CIGS, and PSCs, and their correlation with improved passivation and device performance. This suggests that 3D/2D passivation might be a heretofore unappreciated key to successful polycrystalline thin-film photovoltaics. Finally, the desired attributes of successful low-dimensional layers are presented with rational design strategies for next-generation polycrystalline solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗
2. Solar cell efficiency tables, (version 54)10.1002/pip.3171 ↗
3. Interfacing graphene and related 2D materials with the 3D world
4. Dimensional tailoring of hybrid perovskites for photovoltaics10.1038/s41578-018-0065-0 ↗
5. Excitation to defect-bound band edge states in two-dimensional semiconductors and its effect on carrier transport10.1038/s41524-018-0145-0 ↗
6. Two-dimensional materials and their prospects in transistor electronics10.1039/C5NR01052G ↗
7. A comprehensive picture of Cu doping in CdTe solar cells10.1063/1.4828484 ↗
8. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
9. Beneficial effect of post-deposition treatment in high-efficiency Cu(In,Ga)Se2 solar cells through reduced potential fluctuations10.1063/1.4960344 ↗
10. Charge-carrier recombination in halide perovskites10.1021/acs.chemrev.9b00169 ↗
11. Polycrystalline CdSeTe/CdTe absorber cells With 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
12. Record efficiency for thin-film polycrystalline solar cells up to 22.9% achieved by Cs-treated Cu(in,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
13. From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells10.1016/j.joule.2018.04.010 ↗
14. Two-dimensional cadmium chloride nanosheets in cadmium telluride solar cells10.1021/acsami.7b03671 ↗
15. Review of grain interior, grain boundary, and interface effects of K in CIGS solar cells: mechanisms for performance enhancement10.1016/j.solmat.2017.07.006 ↗
16. Direct insights into RbInSe2 formation at Cu(In,Ga)Se2 thin film surface with RbF postdeposition treatment10.1063/1.5044244 ↗
17. Group III elemental composition dependence of RbF postdeposition treatment effects on Cu(In,Ga)Se2 thin films and solar cells10.1021/acs.jpcc.8b00079 ↗
18. Alkali-induced grain boundary reconstruction on Cu(In,Ga)Se2 thin film solar cells using cesium fluoride post deposition treatment10.1016/j.nanoen.2019.104299 ↗
19. Self-passivation of 2D Ruddlesden–Popper perovskite by polytypic surface PbI2 encapsulation10.1021/acs.nanolett.9b02069 ↗
20. Advances in two-dimensional organic–inorganic hybrid perovskites10.1039/C9EE03757H ↗
21. Recent progress in 2D/3D multidimensional metal halide perovskites solar cells10.3389/fmats.2020.601179 ↗
22. Substrate-controlled band positions in CH₃NH₃PbI₃ perovskite films10.1039/C4CP03533J ↗
23. Planar perovskite solar cells with long-term stability using ionic liquid additives10.1038/s41586-019-1357-2 ↗
24. Thermomechanical lift-off and recontacting of CdTe solar cells10.1021/acsami.8b16476 ↗
25. Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells10.1126/science.aav7911 ↗
26. Understanding individual defects in CdTe thin-film solar cells via STEM: From atomic structure to electrical activity10.1016/j.mssp.2016.06.017 ↗
27. Direct evidence of enhanced chlorine segregation at grain boundaries in polycrystalline CdTe thin films via three-dimensional TOF-SIMS imaging10.1002/pip.2498 ↗
28. Measurement of chlorine concentrations at CdTe grain boundaries10.1109/JPHOTOV.2014.2357258 ↗
29. Effect of selenium and chlorine co-passivation in polycrystalline CdSeTe devices10.1063/1.5123169 ↗
30. Three-dimensional imaging of selenium and chlorine distributions in highly efficient selenium-graded cadmium telluride solar cells10.1109/JPHOTOV.2019.2955313 ↗
31. Moutinho, H.R., Moseley, J., Romero, M.J., Dhere, R.G., Jiang, C., Jones, K.M., Duenow, J.N., Yan, Y., and Al-Jassim, M.M. (2013). Grain boundary character and recombination properties in CdTe thin films. IEEE 39th Photovoltaic Specialists Conference (PVSC), pp. 3249–3254.10.1109/PVSC.2013.6745144 ↗
32. First-principles study of roles of Cu and Cl in polycrystalline CdTe10.1063/1.4940722 ↗
33. Self-passivation rule and structure of CdTe CdTe Σ3 (112) grain boundaries10.1103/PhysRevB.93.205426 ↗
34. Cl-doping of Te-rich CdTe: complex formation, self-compensation and self-purification from first principles10.1063/1.4928189 ↗
35. Structural and chemical interface characterization of CdTe solar cells by transmission electron microscopy10.1016/S0040-6090(03)00268-2 ↗
36. Atomic-resolution study of grain boundaries in CdTe using scanning transmission electron microscopy10.1017/S1431927618001009 ↗
37. Study of effects of Cl and Se in CdSeTe solar cells using scanning transmission electron microscopy10.1017/S1431927619011486 ↗
38. A comparative study of the effects of nontoxic chloride treatments on CdTe solar cell microstructure and stoichiometry10.1002/aenm.201500554 ↗
39. In-depth analysis of chloride treatments for thin-film CdTe solar cells10.1038/ncomms13231 ↗
40. Lieth · 2013
41. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
42. Compositional investigation of potassium doped Cu (In, Ga) Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
43. Properties of Cu (In, Ga) Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
44. Effects of heavy alkali elements in Cu (In, Ga) Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
45. Nakamura, M., Yoneyama, N., Horiguchi, K., Iwata, Y., Yamaguchi, K., Sugimoto, H., and Kato, T. (2014). Recent R&D progress in solar frontier's small-sized Cu(InGa)(SeS)2 solar cells. IEEE 40th Photovoltaic Specialist Conference (PVSC), pp. 0107–0110.10.1109/PVSC.2014.6925346 ↗
46. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
47. Kamada, R., Yagioka, T., Adachi, S., Handa, A., Tai, K.F., Kato, T., and Sugimoto, H. (2016). New world record Cu(In, Ga)(Se, S)2 thin film solar cell efficiency beyond 22%. IEEE 43rd Photovoltaic Specialists Conference (PVSC), pp. 1287–1291.10.1109/PVSC.2016.7749822 ↗
48. Revealing the beneficial role of K in grain interiors, grain boundaries, and at the buffer interface for highly efficient CuInSe2 solar cells10.1002/pip.3022 ↗
49. Influence of RbF post deposition treatment on heterojunction and grain boundaries in high efficient (21.1%) Cu(In,Ga)Se2 solar cells10.1016/j.nanoen.2019.03.028 ↗
50. The optical properties and chemical decomposition of halides with layer structures. I. crystal structures, optical properties, and electronic structure10.1002/pssb.2220490102 ↗
51. Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites10.1126/science.aba3433 ↗
52. Highly efficient semitransparent perovskite solar cells for four terminal perovskite-silicon tandems10.1021/acsami.9b13145 ↗
53. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications10.1038/ncomms9932 ↗
54. Tandem architecture of perovskite and Cu (In, Ga)(S, Se) 2 created by solution processes for solar cells10.1002/adom.201600373 ↗
55. Rubidium multication perovskite with optimized bandgap for perovskite-silicon tandem with over 26% efficiency10.1002/aenm.201700228 ↗
56. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
57. High efficiency methylammonium lead triiodide perovskite solar cells: the relevance of non-stoichiometric precursors10.1039/C5EE02555A ↗
58. Beneficial effects of PbI2 incorporated in organo-lead halide perovskite solar cells10.1002/aenm.201502104 ↗
59. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
60. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
61. Unraveling the passivation process of PbI2 to enhance the efficiency of planar perovskite solar cells10.1021/acs.jpcc.8b08075 ↗
62. Is excess PbI2 beneficial for perovskite solar cell performance?10.1002/aenm.201502206 ↗
63. The role of PbI 2 in CH 3 NH 3 PbI 3 perovskite stability, solar cell parameters and device degradation10.1039/C7CP04749E ↗
64. Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells10.1021/jacs.6b06320 ↗
65. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability10.1002/anie.201406466 ↗
66. 2D homologous perovskites as light-absorbing materials for solar Cell Applications10.1021/jacs.5b03796 ↗
67. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells10.1038/nature18306 ↗
68. One-year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
69. Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%10.1126/sciadv.aaw2543 ↗
70. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
71. Selective growth of layered perovskites for stable and efficient photovoltaics10.1039/C7EE03513F ↗
72. 2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells10.1039/C6NR04741F ↗
73. Dimensionality and defect engineering using fluoroaromatic cations for efficiency and stability enhancement in 3D/2D perovskite photovoltaics10.1002/solr.202000589 ↗
74. 2D–3D mixed organic–inorganic perovskite layers for solar cells with enhanced efficiency and stability induced by n-propylammonium iodide additives10.1021/acsami.9b06305 ↗
75. Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites10.1038/nenergy.2017.135 ↗
76. Bimolecular additives improve wide-band-gap perovskites for efficient tandem solar cells with CIGS10.1016/j.joule.2019.04.012 ↗
77. Adsorption of water molecules on the CdTe(001) surface10.1016/j.susc.2003.08.045 ↗
78. Surface and bulk effects of K in highly efficient Cu1-xKxInSe2 solar cells10.1016/j.solmat.2018.05.013 ↗
79. Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures10.1021/acs.jpclett.7b02679 ↗
80. High-throughput screening and classification of layered di-metal chalcogenides10.1039/C9NR03752G ↗
81. 2D perovskite stabilized phase-pure formamidinium perovskite solar cells10.1038/s41467-018-05454-4 ↗
82. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells10.1002/adfm.201706923 ↗
83. Mechanism of PbI2 in situ passivated perovskite films for enhancing the performance of perovskite solar cells10.1021/acsami.9b13648 ↗
84. Formation of a passivating CH3NH3PbI3/PbI2 interface during moderate heating of CH3NH3PbI3 layers10.1063/1.4826116 ↗
85. Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI210.1021/ja504632z ↗
86. Termination dependence of tetragonal CH3NH3PbI3 surfaces for perovskite solar cells10.1021/jz501510v ↗
87. Surface and bulk effects of K in Cu1−xKxIn1−yGaySe2 solar cells10.1016/j.solmat.2017.12.038 ↗
88. Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films10.1016/j.jallcom.2017.08.019 ↗
89. Effects of combined additional indium deposition and potassium fluoride post-deposition treatments on Cu(In,Ga)Se2 thin film solar cells10.1002/pip.2892 ↗
90. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
91. Effect of combined alkali (KF + CsF) post-deposition treatment on Cu(InGa)Se2 solar cells10.1002/pssr.201800372 ↗
92. Effects of RbF postdeposition treatment and heat-light soaking on the metastable acceptor activation of CuInSe2 thin film photovoltaic devices10.1063/1.5031898 ↗
93. Evaluation of recombination losses in thin film solar cells using an LED sun simulator − the effect of RbF post-deposition on CIGS solar cells10.1051/epjpv/2018006 ↗
94. Organic–inorganic perovskites: structural versatility for functional materials design10.1021/acs.chemrev.5b00715 ↗
95. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
96. Functional fullerenes for organic photovoltaics10.1039/c2jm15126j ↗
97. Stability of organic solar cells: the influence of nanostructured carbon materials10.1002/aenm.201601320 ↗
98. Intrinsic surface passivation of CdTe10.1063/1.4933186 ↗
99. Defect states and passivation mechanism at grain boundaries of zinc-blende semiconductors10.1088/1361-6641/abe24e ↗
100. Activation of CdTe solar cells using molecular chlorine