Structural investigations of ITO-ZnO films grown by the combinatorial pulsed laser deposition technique

Abstract Mixtures of transparent and conductive oxides such as ITO-ZnO have been grown by a combinatorial pulsed laser deposition technique from two targets that were located 15 mm apart. The films were deposited on (1 0 0)Si and quartz substrates that were heated at temperatures from 300 to 500 °C. Measurements of the In to Zn ratios along the transversal axis of the substrates, which passes through the maximum thickness points corresponding to each target position were performed using energy dispersive X-ray spectroscopy and spectroscopic ellipsometry. From simulations of the X-ray reflectivity spectra, collected with a 2 mm mask on different locations along the transversal axis of the samples, the density and thickness of the deposited films were calculated and then the In to Zn ratios. The crystalline structure and electrical properties of the deposited films were also investigated along the same axis. Changes in the ratio of In/Zn along this axis resulted in changes of the film lattice constant and texture.