Influence of amorphous ceramic interlayers on tribological properties of CVD diamond films
Source abstract
Abstract
Abstract This work deals with the influence of amorphous ceramic interlayers on the tribological behaviors of CVD diamond films on WC-Co substrates. Two types of amorphous ceramic films (a-SiO2 and a-SiC) are synthesized as interlayers by pyrolysis of precursors in a hot filament chemical vapor deposition (HFCVD) apparatus. Tetraethoxysilane (C8H20O4Si) and dimethyldiethoxysilane (C6H16O2Si) are used as source materials respectively. Subsequently CVD diamond top layers are deposited on the amorphous ceramic interlayers. For the sake of comparison, the conventional diamond film with no interlayer is also fabricated. The grain sizes and crystal orientations among as-deposited specimens show little difference, while the diamond top layers on amorphous ceramic interlayers exhibit lower surface roughness than the conventional diamond film with no interlayer. Ball-on-disc experiments are chosen to check the tribological properties of as-fabricated diamond top layers on amorphous ceramic interlayers, which show that the bi-layer (amorphous ceramic + diamond) films obviously present lower friction coefficient than the conventional diamond film with no interlayer. The amorphous ceramic interlayers can act as amorphous binder to fill up the space between the diamond grains and the brittle WC particles, reduce the surface roughness and remarkably improve the tribological behaviors of diamond films. In this study, the a-SiC interlayered diamond film exhibits both the lowest friction coefficient and the lowest surface roughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Improvement of adhesive strength and surface roughness of diamond films on Co-cemented tungsten carbide tools10.1016/S0925-9635(02)00345-X ↗
2. M. G. Peters, R. H. Cummings, European Patent 0519587 A1 (1992).
3. The new diamond-coated carbide cutting tools10.1016/0925-9635(95)00347-9 ↗
4. Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD10.1016/S0043-1648(98)00337-8 ↗
5. On the use of CrN/Cr and CrN interlayers in hot filament chemical vapour deposition (HF-CVD) of diamond films onto WC-Co substrates10.1016/j.diamond.2007.12.059 ↗
6. Interlayers for diamond-coated cutting tools10.1016/0257-8972(94)90189-9 ↗
7. Diamond deposition on hardmetal substrates after pre-treatment with boron or sulfur compounds10.1016/S0925-9635(01)00629-X ↗
8. Novel pretreatment of hard metal substrate for better performance of diamond coated cutting tools10.1016/j.diamond.2006.06.013 ↗
9. Improved adhesion of diamond coating on cobalt-cemented tungsten carbide hardmetal by using pulsed-UV-laser substrate surface pretreatment10.1016/S0169-4332(02)00249-0 ↗
10. Engineered interfaces for adherent diamond coatings on large thermal-expansion coefficient mismatched substrates10.1126/science.272.5260.396 ↗
11. Characterization of diamond films on binderless W-Mo composite carbide10.1016/0925-9635(94)90133-3 ↗
12. A new design of tungsten carbide tools with diamond coatings10.1557/JMR.1996.0282 ↗
13. Improvements in adhesive strength and cutting performance of diamond-coated tools10.1016/0257-8972(91)90336-U ↗
14. Pretreatment of substrate surface for improved adhesion of diamond films on hard metal cutting tools10.1016/S0925-9635(96)00569-9 ↗
15. WC-Co cutting tool inserts with diamond coatings10.1016/S0925-9635(99)00156-9 ↗
16. Improving diamond coating on Ti6Al4V substrate using a diamond like carbon interlayer: Raman residual stress evaluation and AFM analyses10.1016/j.diamond.2011.12.023 ↗
17. Adhesion improvement of diamond coatings on cemented carbide with high cobalt content using PVD interlayer10.1016/j.diamond.2013.01.012 ↗
18. Diamond nucleation and growth on different cutting tool materials: influence of substrate pre-treatments10.1016/0925-9635(95)00426-2 ↗
19. Interlayers for diamond deposition on tool materials10.1016/0925-9635(95)00352-5 ↗
20. Diamond films deposited on WC-Co substrates by use of barrier interlayers and nano-grained diamond seeds10.1016/S0040-6090(96)09454-0 ↗
21. PVD/CVD technology for coating cemented carbides10.1016/0257-8972(94)02325-K ↗
22. Deposition and characterization of diamond coatings on WC-Co cutting tools with W/Al interlayer10.1016/j.diamond.2009.12.019 ↗
23. Adhesion improvement of CVD diamond film by introducing an electro-deposited interlayer10.1016/S0924-0136(03)00116-X ↗
24. Application of heat treatment and dispersive strengthening concept in interlayer deposition to enhance diamond film adherence10.1016/S0040-6090(97)00392-1 ↗
25. Preparation, characterization and wear behavior of PACVD cermets10.1016/0257-8972(94)02338-7 ↗
26. Generation and oxidation of wear debris in dry running tests of diamond coated SiC bearings10.1016/j.diamond.2005.10.069 ↗
27. Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments10.1016/j.surfcoat.2006.11.024 ↗
28. Tribological behaviour of <100> and <111> fibre textured CVD diamond films under dry planar sliding contact10.1016/j.diamond.2006.02.008 ↗
29. Tribological properties and cutting performance of boron and silicon doped diamond films on Co-cemented tungsten carbide inserts10.1016/j.diamond.2013.01.004 ↗
30. Wear resistance of nano- and micro-crystalline diamond coatings onto WC–Co with Cr/CrN interlayers10.1016/j.tsf.2010.07.128 ↗
31. Hot filament chemical vapour deposition and wear resistance of diamond films on WC-Co substrates coated using PVD-arc deposition technique10.1016/j.diamond.2005.09.045 ↗
32. Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates10.1016/j.apsusc.2009.10.092 ↗
33. Role of atomic hydrogen density and energy in low power chemical vapor deposition synthesis of diamond films10.1016/j.tsf.2004.10.009 ↗
34. Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon10.1103/PhysRevB.64.075414 ↗
35. Origin of the 1150−cm-1 Raman mode in nanocrystalline diamond10.1103/PhysRevB.63.121405 ↗
36. Raman scattering from nanometer-sized diamond10.1063/1.115206 ↗
37. Deposition of stress-free diamond films on Si by diamond/β-SiC nanocomposite intermediate layers10.1016/j.diamond.2009.07.007 ↗
38. Effect of surface morphology on the frictional behaviour of hot filament chemical vapour deposition diamond films10.1243/13506501JET586 ↗
39. Friction behaviors of the hot filament chemical vapor deposition diamond film under ambient air and water lubricating conditions10.3901/CJME.2009.05.658 ↗
40. Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates10.1016/j.diamond.2008.10.053 ↗
41. Study of the wear behavior and adhesion of diamond films deposited on steel substrates by use of a Cr–N interlayer10.1016/S0925-9635(98)00321-5 ↗
42. Tribological behaviour of oriented diamond coating/steel couples under various environments10.1016/S0257-8972(99)00446-6 ↗
43. Characterization and tribological evaluation of MW-PACVD diamond coatings deposited on pure titanium10.1016/S0921-5093(99)00782-0 ↗