The synthesis of hollow In2O3 @ Pd-Co3O4 core/shell nanofibers with ultra-thin shell for the low-temperature CO oxidation reaction
Source abstract
Abstract
Abstract In this paper, a series of hollow In2O3 @ Pd-Co3O4 core/shell nanofibers with ultra-thin shell about 20–30 nm have been successfully fabricated by coaxial electrospinning, which used in CO oxidation. Desirably, the In2O3 @ Pd-Co3O4 exhibited the higher CO activity with T90 = 56 °C and lower activation energy. Through some characterizations, it is verified that ultra-thin shell structures, stronger redox ability, structure defects, higher proportion of Pd2+ species and smaller proportion of Co3+ species and higher chemical adsorbed oxygen species of In2O3 @ Pd-Co3O4 were preponderant to the increase of CO activity. Therefore, the In2O3 @ Pd-Co3O4 catalyst could be considered a prospective candidate for the CO oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Gas Sensing Nanomaterials and Sensors · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Dynamic active sites over binary oxide catalysts: In situ/operando spectroscopic study of low-temperature CO oxidation over MnOx-CeO2 catalysts10.1016/j.apcatb.2016.03.030 ↗
2. Role of palladium crystallite size on CO oxidation over CeZrO4-δ supported Pd catalysts
3. An excellent support of Pd-Fe-Ox catalyst for low temperature CO oxidation: CeO2 with rich (200) facets10.1016/j.catcom.2011.11.010 ↗
4. Preparation and characterization of highly active Pd nanoparticles supported Mn3O4 catalyst for low-temperature CO oxidation10.1016/j.materresbull.2019.02.011 ↗
5. Sub-ambient CO oxidation over mesoporous Co3O4: effect of morphology on its reduction behavior and catalytic performance10.1016/j.apcata.2012.04.006 ↗
6. Comparison of the nickel addition patterns on the catalytic performances of LaCoO3 for low-temperature CO oxidation10.1016/j.cattod.2016.05.027 ↗
7. Promoting effects of pretreatment on Pd/CeO2 catalysts for CO oxidation10.1016/j.ijhydene.2019.05.099 ↗
8. Activity controlling factors for low-temperature oxidation of CO over supported Pd catalysts10.1016/j.apcatb.2012.12.025 ↗
9. Superior oxygen transfer ability of Pd/MnOx-CeO2 for enhanced low temperature CO oxidation activity10.1016/j.apcatb.2017.01.020 ↗
10. CO oxidation over Pd supported catalysts -In situ study of the electric and catalytic properties10.1016/j.apcatb.2017.02.017 ↗
11. Pd catalysts supported on Co3O4 with the specified morphologies in CO and CH4 oxidation10.1016/j.apcata.2016.12.021 ↗
12. Kast · Catal. Today · 2016 · 260 · 2110.1016/j.cattod.2015.05.021 ↗
13. Strong metal-support interaction and alloying in Pd/ZnO catalysts for CO oxidation10.1016/j.jcis.2017.01.074 ↗
14. Controlled synthesis of Pd/CoOx-InOx nanofibers for low-temperature CO oxidation reaction10.1039/C9NJ03055G ↗
15. Synthesis of hierarchically double-walled Co3O4 hollow nanofibers assembled by nanosheet building units supporting Pt nanoparticles for high-efficient CO oxidation10.1016/j.matlet.2018.11.094 ↗
16. Fabrication of hollow activated carbon nanofibers (HACNFs) containing manganese oxide catalyst for toluene removal via two-step process of electrospinning and thermal treatment10.1016/j.cej.2019.122315 ↗
17. Ag-loaded cerium-zirconium solid solution oxide nano-fibrous webs and their catalytic activity for soot and CO oxidation10.1016/j.fuel.2017.10.007 ↗
18. Coaxial electrospinning heterojunction SnO2/Au-doped In2O3 core-shell nanofibers for acetone gas sensor10.1016/j.snb.2017.06.077 ↗
19. Fabrication of Cu-doped cerium oxide nanofibers via electrospinning for preferential CO oxidation10.1016/j.catcom.2010.11.021 ↗
20. Au/Co3O4/CeO2 heterostructures: Morphology controlling, junction formation and enhanced catalysis performance10.1016/j.jiec.2017.05.002 ↗
21. Indium-doped Co3O4 nanorods for catalytic oxidation of CO and C3H6 towards diesel exhaust10.1016/j.apcatb.2017.10.001 ↗
22. Low-temperature CO oxidation by Co3O4 nanocubes on the surface of Co(OH)2 nanosheets10.1016/j.catcom.2016.08.020 ↗
23. Enhanced gas-sensing performance of ZnO@In2O3 core@shell nanofibers prepared by coaxial electrospinning10.1016/j.snb.2017.09.022 ↗
24. Promotion effect of palladium on Co3O4 incorporated within mesoporous MCM-41 silica for CO Oxidation10.1016/j.apsusc.2017.01.061 ↗
25. Nanocatalysis on tailored shape supports: Au and Pd nanoparticles supported on MgO nanocubes and ZnO nanobelts10.1021/jp0651034 ↗
26. Synthesis and characterization of nanoparticle Co3O4, CuO and NiO catalysts prepared by physical and chemical methods to minimize air pollution10.1016/j.apcata.2007.07.005 ↗
27. Promoting effects of hydrothermal treatment on the activity and durability of Pd/CeO2 catalysts for CO oxidation10.1021/acscatal.7b01810 ↗
28. Catalytic activity of bimetallic catalysts highly sensitive to the atomic composition and phase structure at the nanoscale10.1039/C5NR04535E ↗
29. Controlled porous hollow Co3O4 polyhedral nanocages derived from metal-organic frameworks (MOFs) for toluene catalytic oxidation
30. Design of selective gas sensors using electrospun Pd-doped SnO2 hollow nanofibers10.1016/j.snb.2010.07.013 ↗
31. Study on TiO2-SnO2 core-shell heterostructure nanofibers with different work function and its application in gas sensor10.1016/j.snb.2016.12.009 ↗
32. An environmentally friendly wide temperature CeWTiOx catalyst with superior performance for the selective catalytic reduction NOx with NH310.1016/j.jiec.2018.09.006 ↗
33. Fabrication of NiO@Co3O4 core/shell nanofibres for high-performance supercapacitors10.1016/j.matlet.2016.10.098 ↗
34. Catalytic performance of manganese doped CuO-CeO2 catalysts for selective oxidation of CO in hydrogen-rich gas10.1016/j.fuel.2015.09.043 ↗
35. Influence of molar ratio and calcination temperature on the properties of TixSn1−xO2 supporting copper oxide for CO oxidation10.1016/j.apcatb.2015.06.034 ↗
36. Morphology-controlled synthesis of 3D, mesoporous, rosette-like CeCoOx catalysts by pyrolysis of Ce[Co(CN)6] and application for the catalytic combustion of toluene10.1039/C8NR07882C ↗
37. Influence of promoter on the catalytic activity of high performance Pd/PATP catalysts10.1016/j.jhazmat.2013.10.044 ↗
38. MOFs derived mesoporous Co3O4 polyhedrons and plates for CO oxidation reaction10.1016/j.jssc.2019.04.040 ↗
39. Oxygen vacancy-rich nitrogen-doped Co3O4 nanosheets as an efficient water-resistant catalyst for low temperature CO oxidation10.1016/j.jcis.2019.06.046 ↗
40. Porous hollow CoInOx nanocubes as a highly efficient catalyst for the catalytic combustion of toluene10.1039/C8NR10052G ↗
41. Structure and catalytic activity of 3D macro/mesoporous Co3O4 for CO oxidation prepared by a facile self-sustained decomposition of metal-organic complexes10.1016/j.molcata.2014.11.021 ↗
42. Low-temperature CO oxidation over Co3O4-based catalysts: Significant promoting effect of Bi2O3 on Co3O4 catalyst10.1016/j.apcatb.2013.06.007 ↗
43. The synergistic catalytic effect between graphene oxide and three-dimensional ordered mesoporous Co3O4 nanoparticles for low-temperature CO oxidation10.1016/j.micromeso.2018.06.042 ↗
44. Morphology-controlled synthesis of 3D flower-like TiO2 and the superior performance for selective catalytic reduction of NOx with NH310.1016/j.cej.2018.03.035 ↗
45. Indium oxide cubes prepared by hydrothermal synthesis as catalysts for CO oxidation10.1016/j.matchemphys.2015.01.009 ↗
46. A facial strategy to synthesize Pd/Co3O4 nanosheets with enhanced performance for methane catalytic oxidation
47. Enhanced triethylamine-sensing properties of P-N heterojunction Co3O4/In2O3 hollow microtubes derived from metal–organic frameworks10.1016/j.snb.2018.01.246 ↗
48. Ultrathin, polycrystalline, two-dimensional Co3O4 for low-temperature CO oxidation10.1021/acscatal.8b04064 ↗
49. The influence of Mn-doped CeO2 on the activity of CuO/CeO2 in CO oxidation and NO + CO model reaction10.1016/j.apsusc.2016.08.035 ↗
50. Influence of CO addition on the toluene total oxidation over Co based mixed oxide catalysts10.1016/j.apcatb.2019.01.081 ↗
51. Co nanoparticles anchoring three dimensional graphene lattice as bifunctional catalyst for low-temperature CO oxidation
52. Highly efficient mesoporous Pd/CeO2 catalyst for low temperature CO oxidation especially under moisture condition10.1016/j.apcatb.2014.04.030 ↗
53. Electrochemical sensor to environmental pollutant of acetone based on Pd-loaded on mesoporous In2O3 architecture10.1016/j.snb.2019.03.139 ↗
54. Fabrication of In2O3/Co3O4-palygorskite composites by the pyrolysis of In/Co-MOFs for efficient degradation of methylene blue and tetracycline10.1016/j.materresbull.2017.03.018 ↗
55. Oxidation of CO on a Pt/Al2O3 catalyst: from the surface elementary steps to light-off tests V. Experimental and kinetic model for light-off tests in excess of O210.1016/j.jcat.2003.11.019 ↗
56. Fabrication of porous carbon spheres and as support for the application of low-temperature CO oxidation10.1016/j.apsusc.2015.03.011 ↗
57. Exploring different reaction mechanisms for oxidation of CO over a single Pd atom incorporated nitrogen-doped graphene: a DFT study10.1016/j.apsusc.2018.08.249 ↗
58. Structure dependence and reaction mechanism of CO oxidation: a model study on macroporous CeO2 and CeO2-ZrO2 catalysts10.1016/j.jcat.2016.10.008 ↗
59. Activation mechanisms of silver toward CO oxidation by tungsten carbide substrate: a density functional theory study10.1016/j.physleta.2019.04.062 ↗