Coupling catalytic hydrolysis and oxidation on Mn/TiO2-Al2O3 for HCN removal
Source abstract
Abstract
Abstract The manganese-modified titania-alumina (Mn/TiO2-Al2O3) catalyst synthesized by sol–gol method was used to remove hydrogen cyanide (HCN) from simulated flue gas. Further, effects of the mass ratios of Ti/Al, Mn loading, calcination temperature, and relative humidity on HCN conversion efficiency and catalytic activity were systematically investigated. The results indicated that the Mn/TiO2-Al2O3 catalyst exhibited significantly enhanced HCN removal efficiency, and the maximum yield of N2 increased to 68.02% without the participation of water vapor. When water vapor was added into the flue gas, the yield of N2 decreased and the formation of NOx was also inhibited. The XRD and XPS results indicated that Mn was mainly present in the form of Mn2+, Mn3+, and Mn4+ on the surface of catalyst and chemisorbed oxygen played a major role in the HCN catalytic oxidation process. The results of DSC-TGA analysis and H2-TPR indicated that the catalyst also exhibited a good thermal and chemical stability. NH3-TPD and CO2-TPD indicated that the surface of the catalyst mainly contained acidic sites. During the reaction, part of NH3 was adsorbed by Bronsted and Lewis acid sites. NH3 adsorbed on Lewis acid sites participated in NH3-SCR, which reduced the amount of NOx produced and resulted in a high N2 yield.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Industrial Gas Emission Control · Catalytic Processes in Materials Science · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. First-principle study of structural, electronic, vibrational and magnetic properties of HCN adsorbed graphene doped with Cr, Mn and Fe10.1016/j.apsusc.2014.12.172 ↗
2. Ammonia, nitrous oxide and hydrogen cyanide emissions from five passenger vehicles10.1016/j.scitotenv.2004.04.061 ↗
3. Hydrogen cyanide formation in selective catalytic reduction of nitrogen oxides over Cu/ZSM-510.1016/0926-860X(94)85150-6 ↗
4. Nitrogen evolution from coal, peat and wood during gasification: literature review10.1016/0378-3820(94)00123-B ↗
5. Product analysis of selective catalytic reduction of NO2 with C2H4 over H-Ferrierite
6. A model gas study of ammonium formate, methanamide and guanidinium formate as alternative ammonia precursor compounds for the selective catalytic reduction of nitrogen oxides in diesel exhaust gas10.1016/j.apcatb.2008.09.027 ↗
7. HCN and NH3 released from biomass and soybean cake under rapid pyrolysis10.1021/ef100959g ↗
8. The oxidation of hydrogen cyanide and related chemistry10.1016/j.pecs.2007.02.004 ↗
9. Molecular simulation studies of adsorption of hydrogen cyanide and methyl ethyl ketone on zeolite NaX and activated carbon10.1016/j.jhazmat.2008.01.045 ↗
10. Dust removal and purification of calcium carbide furnace off-gas10.1016/j.jtice.2013.08.008 ↗
11. Thermodynamic modeling and gaseous pollution prediction of the yellow phosphorus production10.1021/ie200419a ↗
12. Adsorption of low concentration phosphine in yellow phosphorus off-gas by impregnated activated carbon10.1016/j.jhazmat.2009.06.046 ↗
13. Homogeneous formation of NO and N2O from the oxidation of HCN and NH3 at 600–1000 °C10.1016/S0010-2180(99)00107-8 ↗
14. Formation of nitrogen oxides from fuel-N through HCN and NH3: a model-compound study10.1016/0016-2361(94)90218-6 ↗
15. Efficient removal of HCN through catalytic hydrolysis and oxidation on Cu/CoSPc/Ce metal-modified activated carbon under low oxygen conditions10.1039/C6RA21715J ↗
16. Catalytic oxidation of HCN over a 0.5% Pt/Al2O3 catalyst10.1016/j.apcatb.2006.02.009 ↗
17. Hydrolysis and oxidation of gaseous HCN over heterogeneous catalysts10.1016/j.apcatb.2009.07.021 ↗
18. Mechanism of the selective catalytic reduction of NO by NH3 over MnOx/Al2O310.1006/jcat.1997.1789 ↗
19. Competition of selective catalytic reduction and non selective catalytic reduction over MnOx/TiO2 for NO removal: the relationship between gaseous NO concentration and N2O selectivity10.1039/C3CY00648D ↗
20. High DeNOx performance of Mn/TiO2 catalyst by NH310.1016/j.cattod.2010.02.074 ↗
21. Manganese-niobium mixed oxide catalyst for the selective catalytic reduction of NOx with NH3 at low temperatures10.1016/j.cej.2014.03.065 ↗
22. Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods10.1016/j.jhazmat.2008.06.013 ↗
23. Mechanism study of NO catalytic oxidation over MnOx/TiO2 catalysts10.1021/jp200920z ↗
24. Characterization of alumina-titania mixed oxide supports I. TiO2-based supports10.1016/S0927-6513(97)00062-X ↗
25. Characterization of alumina–titania mixed oxide supports: part II: Al2O3-based supports10.1016/S1387-1811(98)00121-8 ↗
26. Mn promoted Pd/TiO2-Al2O3 catalyst for the selective catalytic reduction of NOx by H210.1016/j.apcatb.2015.04.048 ↗
27. New insights into the N2O formation mechanism over Pt-BaO/Al2O3 model catalysts using H2 as a reductant10.1021/es5046106 ↗
28. Three-dimensionally ordered macroporous iron oxide for removal of H2S at medium temperatures10.1021/es304791b ↗
29. Cadmium uptake by hydroxyapatite synthesized in different conditions and submitted to thermal treatment10.1021/es0155940 ↗
30. The hydrolysis of hydrogen cyanide over Nb/La–TiOx catalyst10.1016/j.jtice.2016.10.024 ↗
31. Effects of a combined diesel particle filter-deNOx system (DPN) on reactive nitrogen compounds emissions: a parameter study10.1021/es3029389 ↗
32. Cerium-stabilized Cu-SSZ-13 catalyst for the catalytic removal of NOx by NH310.1021/acs.iecr.5b03221 ↗
33. Improvement of activity and SO2 tolerance of Sn-modified MnOx-CeO2 catalysts for NH3-SCR at low temperatures10.1021/es304732h ↗
34. Effect of the Mn oxidation state and lattice oxygen in Mn-based TiO2 catalysts on the low-temperature selective catalytic reduction of NO by NH310.1080/10962247.2012.696532 ↗
35. XPS investigation of Mn valence in lanthanum manganite thin films under variation of oxygen content10.1103/PhysRevB.73.155425 ↗
36. Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature10.1016/j.catcom.2008.05.001 ↗
37. Surface characterization studies of TiO2 supported manganese oxide catalysts for low temperature SCR of NO with NH310.1016/j.apcatb.2007.05.010 ↗
38. TiO2-supported metal oxide catalysts for low-temperature selective catalytic reduction of NO with NH3I evaluation and characterization of first row transition metals10.1016/j.jcat.2003.09.003 ↗