Thermal analysis of friction welding process in relation to the welding of YSZ-alumina composite and 6061 aluminum alloy
Source abstract
Abstract
Abstract The objective of this work is to establish an analytical data for heat generation by friction welding, based on different parameters of the contact condition between two dissimilar materials. The ceramic composite of Al2O3–YSZ and 6061 Al alloy, which is the example of joining materials by friction welding was used in the experiments. Alumina rods containing 0, 25 and 50 wt% yttria stabilized zirconia were produced by slip casting in Plaster of Paris molds and subsequently sintered at 1600 °C. The diameter of both the ceramic and metal rods was 16 mm. Rotational speeds for friction welding were between 630 and 2500 rpm. As a result, different data was evaluated for obtaining joint properties and operating conditions, and obtained results are useful in modeling the welding process and reliability joint under various conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Friction welding - critical assessment of literature10.1179/174329307X249333 ↗
2. Advances in friction welding process:a review10.1179/136217110X12785889550064 ↗
3. Modelling the orbital friction welding of pearlitic steel bars
4. A thermal and microstructure evolution model of direct-drive friction welding of plain carbon steel10.1007/BF02693157 ↗
5. Comparative analysis of heat generation in friction welding of steel bars10.1016/j.actamat.2008.02.016 ↗
6. Thermo-mechanical and diffusion modelling in the process of ceramic-metal friction welding10.1016/j.jmatprotec.2008.04.012 ↗
7. Mechanical evaluation and thermal modelling of friction welding of mild steel and aluminium10.1016/j.jmatprotec.2010.03.007 ↗
8. A nonlinear inverse problem in estimating the heat generation in rotary friction welding10.1080/10407782.2011.540965 ↗
9. 2006
10. Suleiman · 2006
11. Microstructure and mechanical properties of alumina-6061 aluminum alloy joined by friction welding10.1016/j.matdes.2009.08.019 ↗
12. Evaluation of interfacial bonding in dissimilar materials of YSZ–alumina composites to 6061 aluminium alloy using friction welding10.1016/j.msea.2010.10.060 ↗
13. Fractographic study of zirconia toughened alumina
14. Thermal conductivity of zirconia-alumina composites10.1016/j.ceramint.2004.09.018 ↗
15. Evaluated material properties for a sintered alpha-alumina10.1111/j.1151-2916.1997.tb03074.x ↗
16. Heat capacity, thermal conductivity, and thermal expansion of barium titanate-based ceramics10.1016/j.tca.2004.02.008 ↗
17. Thermal transport studies of electrically conducting materials using the transient hot-strip technique10.1088/0022-3727/19/5/007 ↗
18. High-temperature thermal properties of yttria fully stabilized zirconia ceramics10.1016/S1002-0721(10)60422-X ↗
19. Effect of the Y2O3 concentration in YSZ on the thermophysical property as a thermal shielding material10.1111/j.1744-7402.2009.02363.x ↗
20. Thermal properties of the optically transparent pore-free nanostructured yttria-stabilized zirconia10.1063/1.3264613 ↗
21. Low-energy excitations in yttria-stabilized zirconia10.1103/PhysRevB.29.5881 ↗
22. Thermal diffusivity of polymers by the laser flash technique10.1016/j.polymertesting.2005.03.007 ↗
23. Thermal conductivity of dense and porous yttria-stabilized zirconia10.1023/A:1017970924312 ↗
24. Low-thermal-conductivity rare-earth zirconates for potential thermal-barrier-coating applications10.1111/j.1151-2916.2002.tb00574.x ↗
25. Thermal conductivity of inhomogeneous media
26. Thermal modeling of friction welding10.2355/isijinternational.48.1429 ↗
27. Effect of welding speed on mechanical strength of friction welded joint of YSZ–alumina composite and 6061 aluminum alloy10.1016/j.msea.2011.02.091 ↗
28. Friction stir welding of austenitic stainless steels