Preparation and characterization of the electrodeposited Cr–Al2O3/SiC composite coating
Source abstract
Abstract
Abstract To increase the SiC content in Cr-based coatings, Cr–Al 2 O 3 /SiC composite coatings were plated in Cr(VI) baths which contained Al 2 O 3 -coated SiC powders. The Al 2 O 3 -coated SiC composite particles were synthesized by calcining the precursor prepared by heterogeneous deposition method. The transmission electron microscopy analysis of the particles showed that the nano-SiC particle was packaged by alumina. The zeta potential of the particles collected from the bath was up to +23 mV, a favorable condition for the co-deposition of the particles and chromium. Pulse current was used during the electrodeposition. Scanning Electron Microscopy (SEM) indicated that the coating was compact and combined well with the substrate. Energy dispersive X-ray analysis of Cr–Al 2 O 3 /SiC coatings demonstrated that the concentration of SiC in the coating reached about 2.5 wt.%. The corrosion behavior of the composite coating was studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The data obtained suggested that the Al 2 O 3 /SiC particles significantly enhanced the corrosion resistance of the composite coating in 0.05 M HCl solution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings10.1016/j.apsusc.2010.04.088 ↗
2. Corrosion resistance and mechanical properties of pulse electrodeposited Ni–TiO2 composite coating for sintered NdFeB magnet10.1016/j.jallcom.2009.04.014 ↗
3. Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatings10.1016/j.matlet.2006.04.007 ↗
4. Electrodeposited composite coating of Ni–W–P with nano-sized rod and spherical-shaped SiC particles10.1016/j.materresbull.2008.03.008 ↗
5. Characterization and corrosion behavior of hydroxyapatite/zirconia composite coating on NiTi fabricated by electrochemical deposition10.1016/j.apsusc.2010.09.014 ↗
6. Ni-based electrodeposited composite coating exhibiting improved microhardness, corrosion and wear resistance properties10.1016/j.jallcom.2008.01.058 ↗
7. Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition10.1016/j.wear.2008.04.018 ↗
8. Pulse electrodeposition of Ni–P matrix composite coatings reinforced by SiC particles10.1016/j.jallcom.2010.01.057 ↗
9. Effect of SiC on the corrosion behaviour of chromium coatings10.1179/002029605X50209 ↗
10. Effect of additives on electrodeposition of composite chromium coatings
11. Effect of WC on electrodeposition and corrosion behaviour of chromium coatings10.1007/s10800-004-1760-7 ↗
12. Effect of MoO2 and TiO2 on electrodeposition and properties of chromium coating10.1016/S0257-8972(00)01065-3 ↗
13. The effect of Cs+ ions on codeposition of SiC particles with nickel10.1016/j.matchemphys.2011.01.025 ↗
14. Properties of electrodeposited NiP–SiC composite coatings10.1016/0026-0576(96)84169-9 ↗
15. Electrolytic deposition behaviors of Ni–SiC composite coatings containing submicron-sized SiC particles10.3365/met.mat.2008.10.599 ↗
16. Making the surface of nanocrystalline Ni on an Si substrate ultrasmooth by direct electrodeposition10.1016/j.scriptamat.2008.02.039 ↗
17. Development of Ni80Fe20/Cu nanocrystalline composite wires by pulse-reverse electrodeposition10.1016/j.jallcom.2006.02.104 ↗
18. The structure and corrosion barrier performance of nanocrystalline zirconia electrodeposited coating10.1016/j.corsci.2009.05.004 ↗
19. Pulse electrodeposition of Ni–P matrix composite coatings reinforced by SiC particles10.1016/j.jallcom.2010.01.057 ↗
20. Ni–Co–TiO2 nanocomposite coating prepared by pulse and pulse reversal methods using acetate bath10.1016/j.apsusc.2010.06.029 ↗
21. Influence of ethanol on the electrocodeposition of Ni/Al2O3 nanocomposite films10.1016/j.apsusc.2008.10.114 ↗
22. Characterization of electrodeposited Ni–TiO2 nanocomposite coatings10.1016/j.surfcoat.2007.10.035 ↗
23. The Measurement of Zeta potential Using an Autotitrator: Effect of pH, Application Note by Malvern Instruments, 2005.
24. 2005
25. A scanning vibrating electrode study of chromated-epoxy primer on steel and aluminum10.1149/1.1393955 ↗
26. Genetic correlation between chromium resistance and reduction in Bacillus brevis isolated from tannery effluent10.1111/j.1365-2672.2009.04326.x ↗
27. Long-term chromate reduction by immobilized fungus in continuous column10.1016/j.cej.2010.05.011 ↗
28. Preparation of Fe–Cr–P–Co amorphous alloys by electrodeposition10.1016/j.surfcoat.2004.04.070 ↗
29. Codeposition of micro- and nano-sized SiC particles in the nickel matrix composite coatings obtained by electroplating10.1016/j.surfcoat.2006.10.004 ↗