journal article·2020-09Open access

Reduced Self-Doping of Perovskites Induced by Short Annealing for Efficient Solar Modules

Yehao Deng, Zhenyi Ni, Axel F. Palmstrom, Jingjing Zhao, Shuang Xu, Charles H. Van Brackle, Xun Xiao, Kai Zhu, Jinsong Huang

Joule· Volume 4· Issue 9

Abstract

Controlling of doping in semiconducting light absorber can minimize the charge recombination and maximizing power output from solar cells; however, it is challenging for perovskites due to lack of controlled doping. Here, we report that a short post-annealing of less than 3 min for facilitating high-throughput manufacturing of perovskite solar modules in an ambient environment maintains the stoichiometric composition of perovskites, encouraging a spontaneous de-doping of perovskites during aging. The reduced self-doping results in less charge recombination and, thus, higher device efficiency. The stabilized open-circuit voltage of sub-cells in the CH3NH3PbI3 minimodules with an area >20 cm2 reaches 1.19 V on average. The aperture efficiency reaches 17.8% under one sun and 18.7% under a quarter sun illumination, deriving an averaged efficiency >20.0% for each sub-cell with an area >3 cm2, demonstrating the excellent uniformity of the films by this scalable process. The minimodule also works as uniform light-emitting devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Scalable fabrication of perovskite solar cells10.1038/natrevmats.2018.17 ↗
2. Scalable fabrication and coating methods for perovskite solar cells and solar modules10.1038/s41578-019-0176-2 ↗
3. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films10.1126/sciadv.aax7537 ↗
4. Multifunctional molecular modulators for perovskite solar cells with over 20% efficiency and high operational stability10.1038/s41467-018-06709-w ↗
5. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
6. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide10.1126/science.aay7044 ↗
7. Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells10.1038/s41560-019-0538-4 ↗
8. A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques10.1039/C7EE00757D ↗
9. Cost-performance analysis of perovskite solar modules10.1002/advs.201600269 ↗
10. Photonic flash-annealing of lead halide perovskite solar cells in 1 ms10.1039/C5TA09431C ↗
11. Flash infrared annealing for antisolvent-free highly efficient perovskite solar cells10.1002/aenm.201702915 ↗
12. Perovskite ink with wide processing window for scalable high-efficiency solar cells10.1038/nenergy.2017.38 ↗
13. Rapid processing of perovskite solar cells in under 2.5 seconds10.1039/C5TA00568J ↗
14. Thermal engineering of FAPbI3 perovskite material via radiative thermal annealing and in situ XRD10.1038/ncomms14075 ↗
15. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
16. An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss10.1039/C9EE00751B ↗
17. Efficient perovskite solar cell modules with high stability enabled by iodide diffusion barriers10.1016/j.joule.2019.07.030 ↗
18. Efficient, stable and scalable perovskite solar cells using poly (3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
19. Advanced large area characterization of thin-film solar modules by electroluminescence and thermography imaging techniques10.1016/j.solmat.2014.09.020 ↗
20. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
21. Scalable fabrication of efficient perovskite solar modules on flexible glass substrates10.1002/aenm.201903108 ↗
22. Qualifying composition dependent p and n self-doping in CH3NH3PbI310.1063/1.4899051 ↗
23. Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber10.1063/1.4864778 ↗
24. Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells10.1126/science.aba0893 ↗
25. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
26. Comparing the calculated Fermi level splitting with the open-circuit voltage in various perovskite cells10.1021/acsenergylett.9b00431 ↗
27. Understanding the physical properties of hybrid perovskites for photovoltaic applications10.1038/natrevmats.2017.42 ↗
28. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
29. Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit10.1038/s41566-017-0012-4 ↗
30. Ultrafast ion migration in hybrid perovskite polycrystalline thin films under light and suppression in single crystals10.1039/C6CP06496E ↗
31. Balluffi · 2005
32. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
33. Radiative thermal annealing/in situ x-ray diffraction study of methylammonium lead triiodide: effect of antisolvent, humidity, annealing temperature profile, and film substrates10.1021/acs.chemmater.7b01467 ↗
34. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗