Comparison of surface effects in SiO2 coated and uncoated nickel ferrite nanoparticles

Abstract Magnetic properties of uncoated and silica coated nickel ferrite nanoparticles of comparable sizes have been studied in detail. Silica coated and uncoated nanoparticles were prepared by sol–gel and co-precipitation methods, respectively. Average crystallite size determined by X-ray diffraction is 12 nm and 14 nm for the silica coated and uncoated nanoparticles, respectively. Normalized saturation magnetization value of the coated nanoparticles was found to be lower than of uncoated nanoparticles, while a comparable small coercivity is observed for both the samples. Zero field cooled/field cooled (ZFC/FC) measurements reveal that the average blocking temperature (TB) of coated nanoparticles is lower than of the uncoated nanoparticles and is shifted to lower temperatures at high field. Thermoremanent magnetization (TRM) measurement indicates that the relaxation of coated nanoparticles have not been influenced very much with increasing cooling field as compared to uncoated nanoparticles and is attributed to enhanced surface effects in coated nanoparticles. The main source of enhanced surface effects in the coated nanoparticles is foremost disordered surface spins due to silica matrix. Temperature dependent AC susceptibility exhibits two peaks for the coated nanoparticles’ sample. First peak corresponds to blocking of huge core spin while second peak at lower temperature is may be due to enhanced surface effects (spin-glass behavior). All these findings such as lower saturation magnetization, faster shift of blocking temperature at high field, small effect of high magnetic field on magnetic relaxation, low temperature out-of-phase AC susceptibility peak for the coated nanoparticles signify enhanced surface effects in them as compared to uncoated nanoparticles.