Corrosion-wear monitoring of TiN coated AISI 316 stainless steel by electrochemical noise measurements
Source abstract
Abstract
Abstract A modified electrochemical noise (EN) technique has been applied to monitor corrosion-wear of TiN coated AISI 316 stainless steel sliding against corundum in 0.5 M H 2 SO 4 . Experimental results show that the EN technique can sensitively detect potential and current variations during a corrosion-wear process. Corrosion-wear mechanisms of TiN coatings depend on their substrate properties. When the substrate is passive, such as AISI 316 stainless steel, the potential and current variations reflect the properties of coatings. Depassivation and repassivation alternately take place on the tribo-activated wear area during the steady-state phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Waterhouse · 1975
2. The corrosive wear of cast iron under potentiostatically-controlled conditions in sulphuric acid solutions10.1016/0010-938X(90)90005-P ↗
3. Corrosive wear behaviour of 304-L stainless steel in 1N H2SO4 solution. Part 1. Effect of applied potential10.1016/0043-1648(91)90118-E ↗
4. Corrosion and wear of 304 stainless steel using a scratch test10.1016/0010-938X(92)90189-A ↗
5. Wear corrosion behaviour of TiN coated tool steel10.1051/mattech/199785070017s ↗
6. Corrosion-wear of passivating materials in sliding contacts based on a concept of active wear track area10.1016/S0043-1648(01)00577-4 ↗
7. Wear-accelerated corrosion of passive metals in tribocorrosion systems10.1149/1.1838341 ↗
8. A round robin on combined electrochemical and friction tests on alumina/stainless steel contact in sulphuric acid10.1016/S0043-1648(00)00559-7 ↗
9. Tiboelectrochemical investigation of the friction and wear behaviour of TiN coatings in a neutral solution10.1016/S0301-679X(01)00052-4 ↗
10. Study of wear-corrosion synergy with a new microelectrochemical technique10.1016/S0043-1648(99)00237-9 ↗
11. Application of potential pulse method to the corrosion behavior of the fresh surface formed by scratching and sliding in corrosive wear10.1016/S0043-1648(98)00357-3 ↗
12. Corrosion monitoring system based on measurement and analysis of electrochemical noise10.5006/1.3293594 ↗
13. D.A. Eden, K. Hladky, D.G. John, J.L. Dawson, “Electrochemical noise––simultaneous monitoring of potential and current noise signals from corroding electrodes”, in CORROSION’86, paper No. 274, 1986.
14. Electrochemical noise generation during SCC of a high-strength carbon steel10.5006/1.3585059 ↗
15. Electrochemical noise measurements on stainless steel during corrosion-wear in sliding contacts10.1016/S0043-1648(03)00558-1 ↗
16. Electrochemical characterization of TiN coatings10.1016/0257-8972(93)90200-8 ↗
17. Dechema Corrosion Handbook, Vol. 1, pp. 276–278, DECHEMA, 1987.
18. Review of oxidational wear. Part I10.1016/0301-679X(83)90086-5 ↗
19. Wear-corrosion mechanism of stainless steel in chloride media10.1016/0010-938X(86)90029-6 ↗
20. Quantitative determination of through-coating porosity in thin ceramic physically vapour-deposited coatings10.1016/0040-6090(93)90458-2 ↗
21. A corrosion study of TiN (Physically vapour deposition) hard coatings deposited on various substrates10.1016/0257-8972(94)90095-7 ↗