Hetero-structure La2O3-modified SnO2-Sn3O4 from tin anode slime for highly sensitive and ppb-Level formaldehyde detection
Source abstract
Abstract
Abstract Tin oxides SnO2-Sn3O4 was recovered from tin anode slime via pretreatment process, and creatively applied in ultrasensitive formaldehyde detection by doping La2O3 using high energy ball milling method. Composition, morphology, structure and chemical state of the samples were characterized in detail by XRF, FT-IR, XRD, SEM, HRTEM, XPS techniques. Gas sensing results showed that 1.0 ωt. % La2O3-modified SnO2-Sn3O4 revealed a prominently ultrahigh sensitivity of 117.27 towards 100 ppm formaldehyde, which was 4.9 times higher than pristine SnO2-Sn3O4, as well as rapid response/recovery speed (3 s/3 s) at 220 °C. Furthermore, the sensor was also found to exhibit an ultra-low detection limit of 80 ppb HCHO (S = 1.44). Outstanding selectivity, great repeatability to ppb-level HCHO and remarkable long-term stability were also displayed. The effect of doping appropriate amount of La2O3 and the possible sensing mechanism were investigated particularly. Complex hetero-structures, mixed-valence and catalytic activity of La2O3 made pivotal contributions to the improvement of HCHO sensing properties. The ultimate concept is to realize cycling economy, not only to develop a promising excellent performance formaldehyde sensor from industrial waste to increase the economic efficiency, but also to make a great contribution to environment protection and increase the value of tin slime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Nanostructured materials for room-temperature gas sensors10.1002/adma.201503825 ↗
2. World Health Organization, WHO guidelines for indoor air quality: selected pollutants; 9789289002134, World Health Organization, egional Office for Europe Scherfigsvej 8, DK-2100 Copenhagen Ø, Denmark, 2010, pp. 103–142.
3. Fluorescent chemosensor for detection and quantitation of carbon dioxide gas10.1021/ja103947j ↗
4. Chitosan-templated Pt nanocatalyst loaded mesoporous SnO2 Nanofibers: a superior chemiresistor toward acetone molecules10.1039/C8NR03242D ↗
5. Perovskite La0.75Sr0.25Cr0.5Mn0.5O3−δ sensitized SnO2 fiber-in-tube scaffold: highly selective and sensitive formaldehyde sensing10.1039/C8TA02725K ↗
6. A simple and highly sensitive colorimetric detection method for gaseous formaldehyde10.1021/ja910366p ↗
7. Efficacy of a detector tube method in formaldehyde measurement10.2486/indhealth.41.306 ↗
8. An integrated air monitoring approach for assessment of formaldehyde in the workplace10.1016/j.shaw.2018.05.002 ↗
9. Ultrafast and efficient detection of formaldehyde in aqueous solutions using chitosan-based fluorescent polymers10.1021/acssensors.8b00835 ↗
10. Carbon nanotubes based electrochemical biosensor for detection of formaldehyde released from a cancer cell line treated with formaldehyde-releasing anticancer prodrugs10.1016/j.bioelechem.2009.06.016 ↗
11. A low-cost miniaturized colorimetric sensor with vertically-stacked semi-transparent finger-type organic photo detector for formaldehyde sensing10.1016/j.orgel.2019.05.037 ↗
12. Multifunctional microchip-based distillation apparatus I-Steam distillation for formaldehyde detection10.1016/j.aca.2019.02.016 ↗
13. CAFE: A new, improved nonresonant laser-induced fluorescence instrument for airborne in situ measurement of formaldehyde10.5194/amt-12-4581-2019 ↗
14. A ratiometric fluorescent probe for the detection of formaldehyde in aqueous solution and air via Aza-Cope reaction10.1016/j.dyepig.2019.107743 ↗
15. A two-photon fluorescent probe for imaging of endogenous formaldehyde in HeLa cells and quantitative detection of basal formaldehyde in milk samples10.1039/C9AY00553F ↗
16. Efficacy of a detector tube method in formaldehyde measurement10.2486/indhealth.41.306 ↗
17. Rapid screening of formaldehyde in food using paper-based titration10.1016/j.aca.2019.03.063 ↗
18. Preparation of three-dimensional Ce-doped Sn3O4 hierarchical microsphere and Its application on formaldehyde gas sensor10.1016/j.jallcom.2017.08.079 ↗
19. Synthesis of SnO2/In2O3 hetero-nanotubes by coaxial-electrospinning method for enhanced formaldehyde response10.1039/C5NJ02337H ↗
20. Hollow Pt-functionalized SnO2 hemipill network formation using a bacterial skeleton for the noninvasive diagnosis of diabetes10.1021/acssensors.7b00955 ↗
21. Environmentally friendly recycling of SnO2/Sn3O4 from tin anode slime for application in formaldehyde sensing material by Ag/Ag2O modification10.1016/j.jallcom.2018.06.258 ↗
22. Tailoring energy level and surface basicity of metal oxide semiconductors by rare-earth incorporation for high-performance formaldehyde detection10.1039/C9QI00381A ↗
23. Structural/surface characterization and catalytic evaluation of rare-earth (Y, Sm and La) doped ceria composite oxides for CH3SH catalytic decomposition10.1016/j.apsusc.2016.08.129 ↗
24. Facile synthesis of La-doped In2O3 hollow microspheres and enhanced hydrogen sulfide sensing characteristics10.1016/j.snb.2018.08.130 ↗
25. Mixed potential type acetone sensor based on Ce0.8Gd0.2O1.95 and Bi0.5La0.5FeO3 sensing electrode used for the detection of diabetic ketosis10.1016/j.snb.2019.126688 ↗
26. La doped AlPO-5: Enhanced NH3 sensing properties, thermodynamic investigation and humidity-enhanced effect10.1016/j.jssc.2019.05.043 ↗
27. Boron-doped graphene quantum dot/Ag-LaFeO3 p-p heterojunctions for sensitive and selective benzene detection10.1039/C8TA03425G ↗
28. APTES-functionalized thin-walled porous WO3 nanotubes for highly selective sensing of NO2 in a polluted environment10.1039/C8TA02452A ↗
29. Reversible formation of g-C3N4 3D hydrogels through ionic liquid activation: gelation behavior and room-temperature gas-sensing properties10.1002/adfm.201700653 ↗
30. An ultrasensitive NO2 gas sensor based on a hierarchical Cu2O/CuO mesocrystal nanoflower10.1039/C8TA04404J ↗
31. Effects of Ti doping on properties of Nb3Al superconductor fabricated by high-energy ball milling10.1016/j.ceramint.2019.05.082 ↗
32. Atomic radii in crystals10.1063/1.1725697 ↗
33. Fischer-Tropsch synthesis over methyl modified Fe2O3@SiO2 catalysts with low CO2 selectivity10.1016/j.apcatb.2018.03.048 ↗
34. Hydrothermal synthesis and gas-sensing properties of flower-like Sn3O410.1016/j.snb.2015.09.089 ↗
35. Graphene oxide templating: Facile synthesis of morphology engineered crumpled SnO2 nanofibers for superior chemiresistors10.1039/C8TA03579B ↗
36. Three-dimensional lupinus-like TiO2 nanorod@Sn3O4 nanosheet hierarchical heterostructured arrays as photoanode for enhanced photoelectrochemical performance10.1021/acsami.7b11872 ↗
37. Top or bottom, assembling modules determine the photocatalytic property of the sheetlike nanostructured hybrid photocatalyst composed with Sn3O4 and rGO (GQD)10.1021/acssuschemeng.8b02030 ↗
38. High performance gas sensors based on in-situ fabricated ZnO/polyaniline nanocomposite: the effect of morphology on the sensing properties10.1016/j.snb.2018.02.157 ↗
39. A wide linear range and stable H2O2 electrochemical sensor based on Ag decorated hierarchical Sn3O410.1016/j.electacta.2017.02.052 ↗
40. Self-assembly of novel hierarchical flowers-like Sn3O4 decorated on 2D graphene nanosheets hybrid as high-performance anode materials for LIBs10.1016/j.apsusc.2017.01.244 ↗
41. Bioinspired cocatalysts decorated WO3 nanotube toward unparalleled hydrogen sulfide chemiresistor10.1021/acssensors.8b00210 ↗
42. La2O3-sensitized SnO2 nanocrystalline porous film gas sensors and sensing mechanism toward formaldehyde10.1016/j.snb.2013.07.002 ↗
43. Synthesis of La2O3 doped Zn2SnO4 hollow fibers by electrospinning method and application in detecting of acetone10.1016/j.apsusc.2017.07.073 ↗
44. Enhanced sensitivity and selectivity of CO2 gas sensor based on modified La2O3 nanorods10.1016/j.jallcom.2017.06.223 ↗
45. Facile synthesis of highly dispersed Co3O4 nanoparticles on expanded, thin black phosphorus for a ppb-level NOx gas sensor10.1021/acssensors.8b00397 ↗
46. Shaddock peels as bio-templates synthesis of Cd-doped SnO2 nanofibers: A high performance formaldehyde sensing material10.1016/j.jallcom.2019.152170 ↗
47. Designed synthesis of Ag-functionalized Ni-doped In2O3 nanorods with enhanced formaldehyde gas sensing properties10.1039/C9TC00978G ↗
48. Bond dissociation energies of organic molecules10.1021/ar020230d ↗
49. PdO/PdO2 functionalized ZnO: Pd films for lower operating temperature H2 gas sensing10.1039/C8NR03260B ↗
50. Well-tuned surface oxygen chemistry of cation off-stoichiometric spinel oxides for highly selective and sensitive formaldehyde detection10.1021/acs.chemmater.7b05251 ↗
51. Density gradient strategy for preparation of broken In2O3 microtubes with remarkably selective detection of triethylamine vapor10.1021/acsami.8b09375 ↗
52. Flexible room-temperature NH3 sensor for ultrasensitive, selective, and humidity-independent gas detection10.1021/acsami.8b09169 ↗
53. Band bending in semiconductors: chemical and physical consequences at surfaces and interfaces10.1021/cr3000626 ↗
54. Revealing the relationship between energy level and gas sensing performance in heteroatom-doped semiconducting nanostructures10.1021/acsami.8b10057 ↗
55. Few-layered WS2 nanoplates confined in Co, N-Doped hollow carbon nanocages: abundant WS2 edges for highly sensitive gas sensors10.1002/adfm.201802575 ↗
56. MOF-derived synthesis of mesoporous In/Ga oxides and their ultra-sensitive ethanol-sensing properties10.1039/C8TA00269J ↗
57. Polyaniline anchored MWCNTs on fabric for high performance wearable ammonia sensor10.1021/acssensors.8b00589 ↗
58. Enhanced gas-sensitivity and ferromagnetism performances by the Ni-doping induced oxygen vacancies in (Mn, Ni) codoped ZnO nanorods10.1016/j.apsusc.2019.06.014 ↗
59. UV-enhanced NO2 gas sensing properties of polystyrene sulfonate functionalized ZnO nanowires at room temperature10.1039/C8QI01110A ↗
60. Enhanced formaldehyde sensing performance based on Ag@WO3 2D nanocomposite10.1016/j.powtec.2018.11.008 ↗
61. The nature of defects in fluorine-doped TiO210.1021/jp8004184 ↗