Corrosion inhibition of stainless steel type AISI 304 by Mn coating and subsequent annealing with flow of nitrogen at different temperatures
Source abstract
Abstract
Abstract This work reports the enhancement of stainless steel corrosion resistance coated with Mn and post-annealed with flow of nitrogen at different annealing temperatures. Crystallographic variation of the samples by annealing temperature is studied by X-ray diffraction (XRD) while their surface morphology and surface roughness was obtained by means of atomic force microscope (AFM) and scanning electron microscope (SEM) analyses before and after corrosion test respectively. Elemental analysis of samples after corrosion test was investigated by energy dispersive spectroscope (EDS) analysis. The corrosion behaviour of the samples was evaluated by potentiodynamic polarization test in 0.6 M NaCl solution. A critical annealing temperature is found at which the highest corrosion resistance can be achieved. Correlation between corrosion resistance, structural and surface morphology results is obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Corrosion behavior of electroless nickel-coated AISI 304 stainless steel enhanced by titanium ion implantation10.1016/j.surfcoat.2004.07.118 ↗
2. Effects of PVD sputtered coatings on the corrosion resistance of AISI 304 stainless steel10.1016/S0921-5093(02)00578-6 ↗
3. Hybrid elevated-temperature, lowrhigh-voltage plasma immersion ion implantation of AISI304 stainless steel10.1016/S0257-8972(00)00996-8 ↗
4. Chemical analysis of passive films on type AISI 304 stainless steel using soft X-ray absorption spectroscopy10.1016/S0010-938X(97)00149-2 ↗
5. Effect of nitrogen ion implantation on corrosion inhibition of nickel coated 316 stainless steel and correlation with nano-structure10.1016/j.apsusc.2012.06.060 ↗
6. Influence of Ni deposition and subsequent N+ ion implantation at different substrate temperatures on nano-structure and corrosion behaviour of type 316 and 304 stainless steels10.1016/j.apsusc.2011.08.014 ↗
7. Influence of annealing temperature on the nanostructure and corrosivity of Ti/stainless steel substrates10.1016/j.apsusc.2007.09.101 ↗
8. Formation of an MN-type cubic nitride phase in reactively sputtered stainless steel–nitrogen films10.1016/j.jcrysgro.2004.03.066 ↗
9. Influence of chemical composition on the pitting corrosion resistance of non-standard low-Ni high-Mn–N duplex stainless steels10.1016/S0010-938X(02)00154-3 ↗
10. Effect of different Mn contents on tensile and corrosion behavior of CD4MCU cast duplex stainless steels10.1016/j.msea.2005.01.046 ↗
11. Effect of Mn on damping capacities, mechanical properties, and corrosion behaviour of high damping Mg–3wt.%Ni based alloy10.1016/j.msea.2008.04.011 ↗
12. Effects of Mn on the localized corrosion behavior of Fe–18Cr alloys10.1016/j.electacta.2010.01.006 ↗
13. Effect of Mo and Mn additions on the corrosion behavior of AISI 304 and 316 stainless steels in H2SO410.1016/j.corsci.2007.11.004 ↗
14. Development of high Mn–N duplex stainless steel for automobile structural components10.1016/j.corsci.2007.07.004 ↗
15. The influence of nitrogen on the passivation of stainless steels10.1016/0010-938X(96)00018-2 ↗
16. Effect of plasma immersion ion implantation of nitrogen on the wear and corrosion behavior of 316LVM stainless steel10.1016/j.surfcoat.2006.08.149 ↗
17. Effect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals10.1016/j.matlet.2005.03.010 ↗
18. Low-temperature plasma-assisted nitriding10.1016/S0257-8972(00)00792-1 ↗
19. Effects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions10.1016/j.electacta.2009.02.024 ↗
20. Corrosion behaviour of duplex stainless steels sintered in nitrogen10.1016/j.corsci.2008.10.003 ↗
21. Effect of nitrogen on the corrosion behavior of austenitic stainless steel in chloride solutions10.1016/j.matlet.2005.05.063 ↗
22. E.E. Stansbury, R.A. Buchanan Fundamentals of Electrochemical Corrosion, ASM, International, Ohio, 2000.10.31399/asm.tb.fec.9781627083027 ↗
23. Investigating accuracy of the Tafel extrapolation method in HCl solutions10.1016/j.corsci.2009.03.001 ↗
24. Kelly · 2002
25. Klung · 1954
26. Scherrer after sixty years: A survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
27. Effect of ion bombardment during deposition on the x-ray microstructure of thin silver films10.1116/1.573271 ↗
28. Localized corrosion mechanisms of the multilayered coatings related to growth defects10.1016/S0257-8972(03)00939-3 ↗