journal article·2011-10

Interface and its effect on the interlaminate shear strength of novel glass fiber/hyperbranched polysiloxane modified maleimide-triazine resin composites

Ping Liu, Qingbao Guan, Aijuan Gu, Guozheng Liang, Li Yuan, Jianfei Chang

Applied Surface Science· Volume 258· Issue 1
Publisher page

Abstract

Abstract Interface is the key topic of developing advanced fiber reinforced polymeric composites. Novel advanced glass woven fabric (GF) reinforced composites, coded as GF/mBT, were prepared, of which the matrix resin was hyperbranched polysiloxane (HBPSi) modified maleimide-triazine (mBT) resin. The influence of the composition of the matrix on the interfacial nature of the GF/mBT composites were studied and compared with that of the composite based on GF and BT resin using contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and dielectric properties over wide frequency and temperature ranges. Results show that the interfacial nature of the composites is dependent on the chemistries of the matrices, mBT matrices have better interfacial adhesion with GF than BT resin owing to the formation of chemical and hydrogen bonds between mBT resin and GF; while in the case of mBT resins, the content of HBPSi also plays an important role on the interfacial feature and thus the macro-performance. Specifically, with increasing the content of HBPSi in the matrix, the interlaminate shear strength of corresponding composites significantly improves, demonstrating that better interfacial adhesion guarantees outstanding integrated properties of the resultant composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. High performance bismaleimide/cyanate ester hybrid polymer networks with excellent dielectric properties10.1016/j.compscitech.2005.11.001 ↗
2. Correlation between the microstructure and the electromagnetic properties of carbonyl iron filled polymer composites10.1016/j.compositesa.2007.08.002 ↗
3. Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites10.1021/la062743p ↗
4. Functionalized single-walled carbon nanotubes for carbon fiber-epoxy composites10.1021/jp071329a ↗
5. Electrochemical and AFM characterization of the electropolimerization of pyrrole over a graphite–epoxy resin solid composite electrode, in the presence of different anions10.1016/j.apsusc.2005.07.060 ↗
6. Design and reinforcement: vertically aligned carbon nanotube-based sandwich composites10.1021/nn101650p ↗
7. Effects of fibre coating (size) on properties of glass fibre/vinyl ester composites10.1016/S1359-835X(99)00005-6 ↗
8. Investigation on adhesion, interphases, and failure behaviour of cyclic butylene terephthalate (CBT®)/glass fiber composites10.1016/j.compscitech.2007.04.014 ↗
9. Delamination of pultruded glass fiber-reinforced polymer composites subjected to axial compression10.1016/j.compstruct.2009.04.030 ↗
10. Toughness of the fiber/matrix interface in nylon-6/glass fiber composites10.1016/S1359-835X(97)00079-1 ↗
11. Effect of support matrix on interfacial shear strength determination by the bimatrix fragmentation technique10.1016/1359-835X(96)00002-4 ↗
12. Bismaleimide/carbon nanotube hybrids for potential aerospace application: I. Static and dynamic mechanical properties10.1002/pat.944 ↗
13. Mechanical performance of hybrid bismaleimide composites reinforced with three-dimensional braided carbon and Kevlar fabrics10.1016/j.compositesa.2006.02.021 ↗
14. Reinforcing poly(epsilon-caprolactone) nanofibers with cellulose nanocrystals10.1021/am9003705 ↗
15. Effects of moisture and thermal cycling on in-plane shear properties of graphite fibre-reinforced cyanate ester resin composites10.1016/1359-835X(96)00027-9 ↗
16. The effect of oxygen-plasma treatment on Kevlar fibers and the properties of Kevlar fibers/bismaleimide composites10.1016/j.apsusc.2010.10.133 ↗
17. Q.B. Guan, A.J. Gu, G.Z. Liang, C. Zhou, L. Yuan, Preparation and properties of new high performance maleimide-triazine resins for resin transfer moulding, Polym. Adv. Technol. doi:10.1002/pat.1643.10.1002/pat.1643 ↗
18. Continuous coating of synthetic fibers using hexamethyldisiloxane10.1002/ppap.200732406 ↗
19. XPS study on silica-bismuthate glasses and glass ceramics10.1016/j.ssc.2006.09.036 ↗
20. XPS and AFM study of interaction of organosilane and sizing with E-glass fibre surface10.1080/00218460802004386 ↗
21. The use of XPS for characterisation of glass fibre coatings10.1016/S1359-835X(99)00042-1 ↗
22. Synthesis and electrorheological characteristics of polyaniline-coated poly(methyl methacrylate) microsphere: size effect10.1021/la026969d ↗
23. Prediction of dielectric constants and glass transition temperatures of polymers by quantitative structure property relationships10.1016/j.eurpolymj.2006.12.029 ↗
24. Interfacial relaxation phenomena in particulate composites of epoxy resin with copper or iron particles10.1016/0254-0584(96)80063-0 ↗
25. Aluminum-borate-whiskers-reinforced bismaleimide composites 1: preparation and properties10.1002/pi.1401 ↗