SMA-g-MPEG comb-like polymer as a dispersant for Al2O3 suspensions
Source abstract
Abstract
Abstract SMA-g-MPEG comb-like polymer is first employed as the dispersant of Al2O3 suspensions in this paper. The comb-like polymer has anionic polycarboxylate backbone, which makes the polymer easily absorbed on the cationic surface of Al2O3 particles; on the other hand, the comb-like polymer has hydrophilic MPEG side chains, which extend into the solution to provide steric repulsion after the comb-like polymer is absorbed on the surface of Al2O3 particles. The adsorption behavior, zeta potential, apparent viscosity, granularity and TEM images of the Al2O3 suspensions using SMA-g-MPEG as dispersant are investigated. The addition of SMA-g-MPEG improves the dispersibility and decreases the apparent viscosity of the Al2O3 suspension observably. The impacts of the length of side chains on the dispersion of Al2O3 suspensions are particularly discussed. The adsorbed molecular number of the dispersant decreased by increasing the length of side chains. The zeta potential of Al2O3 suspension is more negative by using comb-like polymer with shorter side chains. Based on the steric repulsion and adsorbed molecular number, SMA-g-MPEG with moderate length of side chain is found to have the best dispersibility for Al2O3 suspension.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Development of the methods to make the high purity alumina
2. Protonic conductivity of Pt/Al2O3 in hydrogen- and water-containing atmospheres10.1016/S0169-4332(99)00348-7 ↗
3. Preparation of high pure ultrafine alumina by means of hydrolysis of aluminium isopropoxide10.3724/j.issn.1000-0518.1993.5.99101 ↗
4. Preparation of high pure ultrafine alumina
5. Effects of multicomponent catalyzer on preparation of ultrafine alpha-Al2O3 at low sintering temperature10.1016/j.apt.2009.07.004 ↗
6. Stability of the suspensions of Al2O3 and ZrO2 nano powders
7. Effect of surfactant on the alumina dispersion and corrosion behavior of electroless Ni–P–Al2O3 composite coatings10.1002/maco.200805170 ↗
8. Dispersion behavior and thermal conductivity characteristics of Al2O3–H2O nanofluids10.1016/j.cap.2007.12.008 ↗
9. Contact angle and adsorption behavior of carboxylic acids on alpha-Al2O3 surfaces10.1016/j.jcis.2010.09.087 ↗
10. Effects of sintering additives on dispersion properties of Al2O3 slurry containing polyacrylic acid dispersant10.1016/j.jeurceramsoc.2010.11.001 ↗
11. Effect of dispersant concentration on preparation of an ultrahigh density ZnO–Al2O3 target by slip casting10.1111/j.1551-2916.2009.03178.x ↗
12. Citric acid – a dispersant for aqueous alumina suspensions10.1111/j.1151-2916.1996.tb08006.x ↗
13. Influence of the dispersant structure on properties of electrostatically stabilized aqueous alumina suspensions10.1016/S0955-2219(96)00151-3 ↗
14. A study of the adsorption of acrylic acid and maleic acid from aqueous solutions onto alumina10.1006/jcis.1997.4954 ↗
15. The surface complexation of organic acids on hydrous γ-Al2O310.1016/0021-9797(80)90462-2 ↗
16. The synthesis and characterization of cordierite from talc, flyash and alumina mixtures10.1016/j.ceramint.2005.03.016 ↗
17. Effect of the chemical structure on the properties of polycarboxylate type superplasticizers10.1016/S0008-8846(99)00230-6 ↗
18. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
19. Adsorption mechanism of comb polymer dispersants at the cement/water interface10.1080/01932690903333580 ↗
20. Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions10.1016/j.jcis.2009.04.057 ↗
21. PAA/PEO comb polymer effects on rheological properties and interparticle forces in aqueous silica suspensions10.1016/S0021-9797(03)00179-6 ↗
22. Poly(acrylic acid)-poly (ethylene oxide) comb polymer effects on BaTiO3 nanoparticle suspension stability10.1111/j.1551-2916.2004.00181.x ↗
23. Colloidal chemistry examination of the steric effect of polycarboxylate superplasticizers
24. Role of steric hindrance in the performance of superplasticizers for concrete10.1111/j.1151-2916.1997.tb03169.x ↗