journal article·2017-02

PLLA scaffolds surface-engineered via poly (propylene imine) dendrimers for improvement on its biocompatibility/controlled pH biodegradability

Atiyeah. Ganjalinia, Somaye. Akbari, Atefeh. Solouk

Publisher page

Abstract

Abstract Novel aminolyzed Poly (L) Lactic Acid (PLLA) films and electrospun nanofibrous scaffolds were fabricated and characterized as potential substrates for tissue engineering. The second generation polypropylene imine dendrimer (PPI-G2) was used as the aminolysis agent to functionalize the inert surface of PLLA substrates directly without any pre-modification process. The effect of the solvent type, G2 concentration, reaction temperature and time were studied by following weight reduction percentage, FTIR and contact angle measurements due to determined optimum conditions. In addition, the modified scaffolds abbreviated by PLLA/G2 were analyzed using mechanical properties, SEM images and dye assays as host-guest modeling. The results indicate that under the 0.5 (wt.%) G2 concentration, ethanol as the solvent, room temperature and 4 h of treatment, the optimum conditions were obtained. It was shown that the hydrophilic properties of PLLA/G2 were greatly enhanced. Also, pH value analysis revealed that after 4 weeks, the biodegradation of PLLA caused massive immune cells infusion and inflammation in the medium through increasing the acidic rate by secretion the lactic acid, whereas the PLLA/G2 scaffolds greatly reduced and stabilize the acidic rate through aminolysis reaction. Finally, promoted cell adhesion and viability underlined the favorable properties of PLLA/G2 scaffolds as a biodegradable biomaterial for biomedical implants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Dendrimers and Hyperbranched Polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Surface modification of poly (D, LaLactic acid) scaffolds for orthopedic applications: a biocompatible nondestructive route via diazonium chemistry10.1021/am502752j ↗
2. Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration drug delivery and pharmaceuticals10.1039/C4CS00226A ↗
3. Surface modification of polycaprolactone membrane via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells10.1021/bm020074y ↗
4. Functionalized poly (lactic-co-glycolic acid) enhances drug delivery and provides chemical moieties for surface engineering while preserving biocompatibility10.1016/j.actbio.2009.04.012 ↗
5. Poly (lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
6. Fabrication and characterization of six electrospunpoly (-hydroxy ester) based fibrous scaffolds for tissue engineering applications10.1016/j.actbio.2006.02.005 ↗
7. Reinforced poly (propylene carbonate) composite with enhanced and tunable characteristics, an alternative for poly(lactic acid)10.1021/acsami.5b06407 ↗
8. Containing poly-(lactide-co-glycolide) (Plga) scaffolds for bone tissue engineering10.1016/j.msec.2014.08.035 ↗
9. In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization10.1016/j.actbio.2011.02.011 ↗
10. Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering10.1016/j.actbio.2010.08.015 ↗
11. Comparison of some effects of modification of a polylactide surface layer by chemical plasma, and laser methods10.1016/j.apsusc.2015.03.202 ↗
12. Polymer surface modification for the attachment of bioactive compounds10.1016/j.progpolymsci.2007.04.002 ↗
13. Functionalized poly (D, L-Lactide) for pulmonary epithelial cell culture10.1002/adem.200980031 ↗
14. Modification of polylactic acid surface using RF plasma discharge with sputter deposition of a hydroxyapatite target for increased biocompatibility10.1016/j.apsusc.2014.12.127 ↗
15. Nano-Composite of poly (L-Lactide) and surface grafted hydroxyapatite: mechanical properties and biocompatibility10.1016/j.biomaterials.2005.04.018 ↗
16. Surface functionalization of degradable polymers by covalent grafting10.1016/j.biomaterials.2005.10.010 ↗
17. Surface-Functionalized electrospun nanofibers for tissue engineering and drug delivery10.1016/j.addr.2009.07.007 ↗
18. Bioactive albumin functionalized polylactic acid membranes for improved biocompatibility10.1016/j.reactfunctpolym.2012.12.007 ↗
19. Functionalized synthetic biodegradable polymer scaffolds for tissue engineering10.1002/mabi.201100466 ↗
20. Controllable surface modification of poly(lactic-co-glycolic acid) (PLGA) by hydrolysis or aminolysis I: physical, chemical, and theoretical aspects10.1021/bm0343040 ↗
21. Surface hydrophilicity and enzymatic hydrolyzability of biodegradable polyesters: 1. Effects on alkaline treatment10.1002/pi.1199 ↗
22. New strategy for controlling biodegradability of biodegradable polyesters by enzyme-catalyzed surface grafting10.1002/marc.200700249 ↗
23. Plasma treatment of polymers for surface and adhesion improvement10.1016/S0168-583X(03)00644-X ↗
24. Surface modification of smooth poly(L-lactic acid) films for gelatin immobilization10.1021/am201795g ↗
25. Chemical modification of poly (Ethylene terephthalate) and immobilization of the selected enzymes on the modified film10.1016/j.apsusc.2009.05.126 ↗
26. Surface investigation on biomimetic materials to control cell adhesion: the case of RGD conjugation on PCL10.1021/la100207q ↗
27. The design of biodegradable microcarriers for induced cell aggregation10.1002/mabi.200900160 ↗
28. Aminolysis-based surface modification of polyesters for biomedical applications10.1039/C2RA22358A ↗
29. Preparation and characterization of caffeic acid-Grafted electrospun poly (L-lactic acid) fiber mats for biomedical applications10.1021/am300404v ↗
30. Dendrimer applications – a review
31. Characterization of bioactive RGD peptide immobilized onto poly (acrylic acid) thin films by plasma polymerization10.1016/j.apsusc.2010.07.040 ↗
32. Enhanced cell affinity of poly(L-lactide) film by immobilizing phosphonizedchitosan10.1016/j.apsusc.2008.06.073 ↗
33. Synthesis characterization, and applications of dendrimer-encapsulated nanoparticles10.1021/jp0469665 ↗
34. Dendrimers as carriers for delivery of chemotherapeutic agents10.1021/cr900174j ↗
35. Surface modification of polycaprolactone film via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells10.1021/bm020074y ↗
36. Dendrimers in biomedical applications reflections on the field10.1016/j.addr.2012.09.030 ↗
37. Poly amidoamine dendrimer and oleic acid-functionalized graphene as biocompatible and efficient gene delivery vectors10.1021/am500812h ↗
38. Functional dendrimers10.1016/S0079-6700(00)00017-4 ↗
39. Targeted gene delivery to macrophages by biodegradable star-shaped polymers10.1021/acsami.5b08119 ↗
40. Improved wettability and adhesion of poly lactic acid/chitosan coating for bio-based multilayer film development10.1016/j.apsusc.2015.01.157 ↗
41. Advances in the chemistry of dendrimers10.1039/c3nj01239e ↗
42. Poly (amidoamine) dendrimer-enabled simultaneous stabilization and functionalization of electrospun poly (γ-glutamic acid) nanofibers10.1021/am405273v ↗
43. Syntheses, characterization and adsorption properties for Pb2+of silica-gel functionalized by dendrimer-like polyamidoamine and 5-sulfosalicylic acid10.1016/j.apsusc.2015.12.084 ↗
44. PAMAM dendrimer-drug interactions: effect of pH on the binding and release pattern10.1021/jp211515g ↗
45. Reducing cytotoxicity while improving anti-cancer drug loading capacity of poly propylene imine dendrimers by surface acetylation
46. Dendrimer-functionalized electrospun cellulose acetate nanofibers for targeted cancer cell capture applications10.1039/C4TB01278J ↗
47. Modification of poly (L-lactic acid) electrospun fibers and films with poly (propylene imine) dendrimer10.1016/j.apsusc.2015.12.070 ↗
48. Effects of morphology conformation and configuration on the IR and raman spectra of various poly (lactic acid)10.1016/S0032-3861(97)00229-2 ↗
49. High-temperature hydrolysis of poly (l-lactide) films with different crystallinities and crystalline thicknesses in phosphate-buffered solution10.1002/1439-2054(20010701)286:7<398::AID-MAME398>3.0.CO;2-G ↗
50. Sterilization techniques for biodegradable scaffolds in tissue engineering applications10.1177/2041731416648810 ↗
51. Photodegradation of biodegradable polyesters: a comprehensive study on poly (L-lactic) and poly (ε-caprolactone)10.1016/j.polymdegradstab.2005.07.007 ↗
52. In vitro degradation study of novel HEC/PVA/collagen nanofibrous scaffold for skin tissue engineering applications10.1016/j.polymdegradstab.2014.10.017 ↗
53. Electrospun blends of gelatin and gelatin-dendrimer conjugates as a wound-dressing and drug-delivery platform10.1021/bm401143p ↗
54. Comparison of osteogenic differentiation potential of human adult stem cells loaded on bioceramic-coated electrospun poly (L-lactide) nanofibres10.1111/cpr.12156 ↗
55. Properties of lactic acid based polymers and their correlation with composition10.1016/S0079-6700(02)00012-6 ↗
56. The degradative resistance of polyhedral oligomeric silsesquioxane nanocore integrated polyurethanes: an in vitro study10.1016/j.biomaterials.2005.10.006 ↗
57. External electrostatic interaction versus internal encapsulation between cationic dendrimers and negatively charged drugs: which contributes more to solubility enhancement of the drugs10.1021/jp801742t ↗
58. Fabrication of nano-fibrous poly (L-lactic acid) scaffold reinforced by surface modified chitosan micro-fiber10.1016/j.ijbiomac.2013.07.025 ↗
59. Study on the In vitro degradation of poly (L-lactide)/chitosan microspheres scaffolds10.1007/s11706-013-0188-6 ↗
60. Preparation of hydrophilic poly (L-lactide) electrospun fibrous scaffolds modified with chitosan for enhanced cell biocompatibility10.1016/j.polymer.2012.03.039 ↗
61. Grafting amine-terminated branched architectures from poly(L-Lactide) film surfaces for improved cell attachment10.1002/jbm.b.30647 ↗
62. A review on different approaches for improving cell infiltration in electrospun nanofibrous scaffolds10.1002/term.1978 ↗
63. Collagen-Immobilized patch for repairing of small tympanic membrane perforations: in vitro and In vivo assays10.1002/jbm.a.33293 ↗