journal article·2017-11

Effect of metallic coating on the properties of copper-silicon carbide composites

M. Chmielewski, K. Pietrzak, M. Teodorczyk, S. Nosewicz, D. Jarząbek, R. Zybała, P. Bazarnik, M. Lewandowska, A. Strojny-Nędza

Publisher page

Abstract

Abstract In the presented paper a coating of SiC particles with a metallic layer was used to prepare copper matrix composite materials. The role of the layer was to protect the silicon carbide from decomposition and dissolution of silicon in the copper matrix during the sintering process. The SiC particles were covered by chromium, tungsten and titanium using Plasma Vapour Deposition method. After powder mixing of components, the final densification process via Spark Plasma Sintering (SPS) method at temperature 950 °C was provided. The almost fully dense materials were obtained (>97.5%). The microstructure of obtained composites was studied using scanning electron microscopy as well as transmission electron microscopy. The microstructural analysis of composites confirmed that regardless of the type of deposited material, there is no evidence for decomposition process of silicon carbide in copper. In order to measure the strength of the interface between ceramic particles and the metal matrix, the micro tensile tests have been performed. Furthermore, thermal diffusivity was measured with the use of the laser pulse technique. In the context of performed studies, the tungsten coating seems to be the most promising solution for heat sink application. Compared to pure composites without metallic layer, Cu-SiC with W coating indicate the higher tensile strength and thermal diffusitivy, irrespective of an amount of SiC reinforcement. The improvement of the composite properties is related to advantageous condition of Cu-SiC interface characterized by well homogenity and low porosity, as well as individual properties of the tungsten coating material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. An investigation of the effect of SiC particle size on Cu-SiC composites10.1016/j.compositesb.2012.01.006 ↗
2. Identification and characterization of diffusion barriers for Cu/SiC systems10.1007/s10853-005-2847-1 ↗
3. Micromechanical and nanoscratch behavior of SiCp dispersed metal matrix composites10.1007/s11665-015-1633-8 ↗
4. Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications10.1016/j.msea.2006.12.146 ↗
5. Microstructure and thermal properties of Cu-SiC composite materials depending on the sintering technique
6. Facile soot free approach toward synthesis of carbon nanoropes via chemical vapor deposition of acetylene in the presence of MnFe2O4 coated on stainless steel10.1016/j.apsusc.2015.10.208 ↗
7. Fabrication and characterization of flaky core-shell particles by magnetron sputtering silver onto diatomite10.1016/j.apsusc.2015.11.148 ↗
8. Fabrication of dendritic silver-coated copper powders by galvanic displacement reaction and their thermal stability against oxidation10.1016/j.apsusc.2016.08.008 ↗
9. Morphology-controlled preparation of lead powders by electrodeposition from different PbO-containing choline chloride-urea deep eutectic solvent10.1016/j.apsusc.2015.02.045 ↗
10. Microstructure investigations of dental composite samples prepared by focused ion beam technique10.1111/j.1365-2818.2009.03278.x ↗
11. A new laser flash method for measurement of the thermophysical properties10.1016/j.tca.2006.11.026 ↗
12. The elastic and thermo-elastic properties of composite media10.1088/0370-1301/69/8/305 ↗
13. The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints10.1016/j.msea.2011.03.077 ↗
14. Microstructure evolution at the Cu-Ti interface during high temperature synthesis of copper-intermetallic phases layered composite
15. On the peritectoid Ti3Si formation in Ti-Si alloys10.1016/j.matchar.2005.09.009 ↗
16. The Cr-Cu (Chromium-Copper) system10.1007/BF02868727 ↗
17. Phase formation in Cr-Si thin-film interactions10.1063/1.91767 ↗
18. Interface reactions between silicon carbide and interlayers in silicon carbide–copper metal–matrix composites10.1016/j.jnucmat.2007.01.022 ↗
19. P.R. Subramanian, D.E., Laughlin, 1991. Cu-W (Copper-Tungsten), Phase Diagrams of Binary Tungsten Alloys, Calcutta, 76–79.
20. Thermodynamic properties of the tungsten-silicon and chromium-silicon systems10.1179/030634575790445215 ↗
21. Decomposition and interfacial reaction in brazing of SiC by copper-based active alloys10.1007/BF00728605 ↗
22. Titanium as coupling agent in SiC fibre reinforced copper matrix composites10.1016/j.matchemphys.2004.10.057 ↗
23. The fabrication and property of SiC fiber reinforced copper matrix composites10.1016/j.msea.2007.01.010 ↗
24. Fabrication and properties of W-20Cu alloy reinforced by titanium nitride coated SiC fibers10.1016/j.ijrmhm.2013.02.002 ↗