Improvement of corrosion resistance of Ni Mo alloy coatings: Effect of heat treatment
Source abstract
Abstract
Abstract In this paper, Ni Mo alloy coatings were deposited from bath containing sodium citrate, nickel sulphate, and sodium molybdate. Essentially, this work is divided into two mains parts: (i) the optimization on the coatings deposition parameters and (ii) the effect of the heat treatment. Polarization curves and electrochemical impedance spectroscopy were acquired using potentiostat/galvanostat and a frequency response analyzer, respectively. Morphology and chemical composition of the coatings were investigated by scanning electron microscopy and energy dispersive spectroscopy, respectively. Polarization curves at different condition revealed that electroplating at temperature 40 o C, pH 9 provides a dense coating with high efficiency. Following the optimization of the deposition parameters, the coatings were annealed at 200, 400, and 600 o C for 25 min. The results showed that the coatings obtained at temperature 40 o C, pH 9, and annealing at 600 o C has the highest corrosion resistance and microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Morphological, structural, microhardness and corrosion characterisations of electrodeposited Ni−Mo and Cr coatings10.1590/S0103-50532010001000024 ↗
2. Wear behavior of environmentally acceptable alternatives to chromium coatings: nickel-based candidates10.1016/S0026-0576(04)84678-6 ↗
3. Characterisation of electrodeposited nanocrystalline Ni–Mo alloys10.1007/s10800-004-2460-z ↗
4. Corrosion resistance of electrodeposited NiMoW coatings10.1016/S1452-3981(23)08103-8 ↗
5. Characterisation of Zn–Mo alloy layers electrodeposited from aqueous citrate solution10.1016/j.jallcom.2013.04.205 ↗
6. Electrodeposition and characterisation of nanocrystalline Ni–Mo coatings10.1016/j.surfcoat.2011.10.011 ↗
7. X-ray analysis of changes to the atomic structure around Ni associated with the interdiffusion and mechanical alloying of pure Ni and Mo powders10.1103/PhysRevB.45.7066 ↗
8. Electrochemical noise study of NiMo alloys fabricated by mechanical alloying and densified by spark plasma sintering10.1016/S1452-3981(23)16604-1 ↗
9. Practical applications for electrodeposited nanocrystalline materials10.1016/S0965-9773(99)00294-9 ↗
10. Industrial applications of electrodeposited nanocrystals10.1016/S0965-9773(97)00163-3 ↗
11. Electrochemical behavior of NiMo electrocatalyst for water electrolysis
12. Brenner · 1963
13. Induced codeposition: II. A mathematical model describing the electrodeposition of NiMo alloys10.1149/1.1836554 ↗
14. Kinetics of Ni–Mo electrodeposition from Ni-rich citrate baths10.1016/j.tsf.2011.10.024 ↗
15. Nanocrystalline materials and coatings10.1016/j.mser.2004.07.001 ↗
16. Effect of concentration of ammonia and citrate ions on the kinetics of cathodic reactions during electrodeposition of a nickel–molybdenum alloy10.1007/s11175-005-0008-0 ↗
17. Evaluation of nickel deposition by electrochemical impedance spectroscopy10.1023/A:1004002303181 ↗
18. Electrodeposition of amorphous/nanocrystalline and polycrystalline Ni–Mo alloys from pyrophosphate baths10.1016/j.electacta.2004.08.028 ↗
19. Optimization of operational parameters and bath control for electrodeposion of NiMoB amorphous alloys10.1590/S0103-50532002000400018 ↗
20. Controlling the thermal stability of texture in single-phase electrodeposits10.1016/S0965-9773(99)00355-4 ↗
21. High-strength nanocrystalline NiW alloys produced by electrodeposition and their embrittlement behaviors during grain growth10.1016/S1359-6462(01)00720-5 ↗
22. Electrodeposition, structure and corrosion resistance of nanocrystalline NiW alloy10.1002/cjoc.20040220303 ↗
23. Effects of annealing temperatures on the physicochemical properties of nickel–phosphorus deposits10.1016/S0254-0584(02)00455-8 ↗