Surface processing and ageing behavior of silk fabrics treated with atmospheric-pressure plasma for pigment-based ink-jet printing
Source abstract
Abstract
Abstract Pigment inkjet printing has highlighted the advantages of cost-effective, short production cycle and environment-friendly. However, patterns directly printed with pigment inks usually have low color yields and blurry images which are caused by bleeding phenomenon. This work presents an atmospheric-pressure plasma method for improving the pigment-based ink-jet printing performance of silk fabrics. The effects of surface changes induced are discussed, with data derived from morphological study by atomic force microscopy (AFM), chemical analysis using X-ray photoelectron spectroscopy (XPS) and contact angle measurement. Ink-jet printing experiments were conducted to study the influence of measured changes on anti-bleeding property and color strength of treated and original samples. The ageing experiment indicates that the modified silk fabrics should be printed within 24 h after plasma processing for maximum color yields. This study explores an effective approach for the atmospheric-pressure plasma, which can provide its significant use in improving the surface properties and ink-jet printing performance of fabrics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Dyeing and Modifying Textile Fibers · Silk-based biomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Modification of cotton fabric with a dendrimer to improve ink-jet printing process
2. Ink jet printing of bio-treated linen, polyester fabrics and their blend
3. Influence of He/O2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics
4. Atmospheric Plasma Surface Modification of PMMA and PP Micro-Particles: Plasma Modification Particles
5. Plasma surface modification effects on biodegradability and protein adsorption properties of chitosan films
6. Surface modification of titania aerogel films by oxygen plasma treatment for enhanced dye adsorption
7. Improving the low temperature dyeability of polyethylene terephthalate fabric with dispersive dyes by atmospheric pressure plasma discharge
8. Surface modification of cotton fabrics by gas plasmas for color strength and adhesion by inkjet ink printing
9. Surface physical–morphological and chemical changes leading to performance enhancement of atmospheric pressure plasma treated polyester fabrics for inkjet printing
10. Surface modification of polyester fabrics by atmospheric-pressure air/He plasma for color strength and adhesion enhancement
11. Aloe vera gel: a new thickening agent forpigment printing
12. Surface energy and wettability of plasma-treated polyacrylonitrile fibers
13. Cross sections for dissociative ionization of molecules by electron impact
14. The use of DBD plasma treatment and polymerization for the enhancement of biomedical UHMWPE
15. ESCA studies of natural weathering phenomena at selected polymer surfaces
16. Influence of layer-by-layer polyelectrolyte deposition and EDC/NHS activated heparin immobilization onto silk fibroin fabric
17. Multifunctional surface modification of silk fabric via graphene oxide repeatedly coating and chemical reduction method
18. Structure and properties of silk fibroin grafted carboxylic cotton fabric via amide covalent modification
19. Wettability measurements on plasma treated synthetic fabrics by capillary rise method
20. Surface modification of polypropylene non-woven fabric using atmospheric nitrogen dielectric barrier discharge plasma
21. Metamorphic superomniphobic surfaces
22. Some properties of a thickener for preparing inkjet printing ink for nylon carpet
23. Inkjet printing effects of pigment inks on silk fabrics surface‐modified with O2 plasma
24. Ageing properties of polyurethane methacrylate and off-stoichiometry thiol-ene polymers after nitrogen and argon plasma treatment
25. Aging behavior of dielectric barrier discharge-modified Twaron fibers in different storage environments