journal article·2010-08Open access

Transparent ultrathin conducting carbon films

Martin Schreiber, Tarek Lutz, Gareth P. Keeley, Shishir Kumar, Markus Boese, Satheesh Krishnamurthy, Georg S. Duesberg

Applied Surface Science· Volume 256· Issue 21

Abstract

Ultrathin conductive carbon layers (UCCLs) were created by spin coating resists and subsequently converting them to conductive films by pyrolysis. Homogeneous layers as thin as 3 nm with nearly atomically smooth surfaces could be obtained. Layer characterization was carried out with the help of atomic force microscopy, profilometry, four-point probe measurements, Raman spectroscopy and ultraviolet–visible spectroscopy. The Raman spectra and high-resolution transmission electron microscopy image indicated that a glassy carbon like material was obtained after pyrolysis. The electrical properties of the UCCL could be controlled over a wide range by varying the pyrolysis temperature. Variation in transmittance with conductivity was investigated for applications as transparent conducting films. It was observed that the layers are continuous down to a thickness below 10 nm, with conductivities of 1.6×104 S/m, matching the best values observed for pyrolyzed carbon films. Further, the chemical stability of the films and their utilization as transparent electrochemical electrodes has been investigated using cyclic voltammetry and electrochemical impedance spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Diamond and Carbon-based Materials Research · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. The influence of the electrode choice on the performance of organic solar cells
2. The dispersion approach for buffer layers and for the active light absorption layer
3. Present status and future prospects for development of non- or reduced-indium transparent conducting oxide thin films10.1016/j.tsf.2008.09.059 ↗
4. Organic photodiodes using polymeric anodes10.1016/S0379-6779(98)00976-X ↗
5. Transparent carbon nanotube coatings10.1016/j.apsusc.2005.01.020 ↗
6. A review of vapor grown carbon nanofiber/polymer conductive composites10.1016/j.carbon.2008.09.039 ↗
7. Infrared transparent carbon nanotube thin films
8. Effect of acid treatment on carbon nanotube-based flexible transparent conducting films10.1021/ja0722224 ↗
9. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
10. Electronic and structural properties of graphene-based transparent and conductive thin film electrodes10.1007/s00339-008-4931-2 ↗
11. Flexible, transparent, conducting films of randomly stacked graphene from surfactant-stabilized, oxide-free graphene dispersions10.1002/smll.200901162 ↗
12. Advanced carbon electrode materials for molecular electrochemistry10.1021/cr068076m ↗
13. Electrochemical studies of carbon films from pyrolyzed photoresist10.1149/1.1838636 ↗
14. Photoresist-derived carbon for microelectromechanical systems and electrochemical applications10.1149/1.1393188 ↗
15. Electroanalytical performance of carbon films with near-atomic flatness10.1021/ac0007534 ↗
16. Surface studies of carbon films from pyrolyzed photoresist10.1016/S0040-6090(01)01185-3 ↗
17. Pyrolysis of negative photoresists to fabricate carbon structures for microelectromechanical systems and electrochemical applications10.1149/1.1436085 ↗
18. Electrical properties and shrinkage of carbonized photoresist films and the implications for carbon microelectromechanical systems devices in conductive media10.1149/1.2116707 ↗
19. Studies of spin-coated polymer films10.1039/b408857n ↗
20. Fabrication of glassy carbon microstructures by soft lithography10.1016/S0924-4247(98)00218-0 ↗
21. One nanometer thin carbon nanosheets with tunable conductivity and stiffness10.1002/adma.200803078 ↗
22. The correction factors and their new curve for the measurement of sheet resistance of a square sample with a square four-point probe10.1063/1.1143608 ↗
23. Ruge · 1991
24. Characterization of indium tin oxide surfaces after KOH and HCL treatments10.1016/j.orgel.2007.12.002 ↗
25. Transparent carbon films as electrodes in organic solar cells10.1002/anie.200704909 ↗
26. Jenkins · 1976
27. New perspectives on the structure of graphitic carbons10.1080/10408430500406265 ↗
28. Raman spectrum of graphite10.1063/1.1674108 ↗
29. Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon10.1103/PhysRevB.64.075414 ↗
30. Graphitization of glassy carbon prepared under high temperatures and high pressures10.1016/S0008-6223(02)00319-6 ↗
31. Raman validity for crystallite size La determination on reticulated vitreous carbon with different graphitization index10.1016/j.apsusc.2007.06.038 ↗
32. Raman study of the microstructure changes of phenolic resin during pyrolysis10.1002/pc.10229 ↗
33. Fabrication of optically transparent carbon electrodes by the pyrolysis of photoresist films: approach to single-molecule spectroelectrochemistry10.1021/ac052244d ↗
34. Processing and characterization of ultrathin carbon coatings on glass10.1021/am900032p ↗
35. Theory and application of cyclic voltammetry for measurement of electrode reaction kinetics10.1021/ac60230a016 ↗
36. The redox behaviour of randomly dispersed single-walled carbon nanotubes both in the absence and in the presence of adsorbed glucose oxidase10.3390/s6121791 ↗
37. Kinetics of rapid electrode reaction10.1039/df9470100011 ↗