journal article·2013-07

Influence of laser surface treated on the characterization and corrosion behavior of Al–Fe aerospace alloys

Moisés Meza Pariona, Viviane Teleginski, Kelly dos Santos, Angela A.O.C. de Lima, Alfredo J. Zara, Katieli Tives Micene, Rudimar Riva

Publisher page

Abstract

AbstractIn this research laser surface remelting without protective coating with a 2kW Yb-fiber laser (IPG YLR-2000S) was applied in the Al–1.5wt.%Fe alloy in order to investigate the layer treated with different techniques of superficial characterization, thereby, the technique of optical microscopy, atomic force microscopy and low-angle X-ray diffraction were used. The present work mainly focuses on the corrosion study by diverse techniques in aggressive environment of the laser-treated area and the substrate material was carried out, thereby, at open circuit potential testing, the results have shown a displacement to more anodic values in the corrosion potential for the laser-treated specimen when compared to the untreated specimen; in potentiodynamic polarization tests have shown that as a result of the laser treatment, the corrosion current can be reduced by as much as ten times, and a passive region was obtained, which served as an effective barrier for reducing anodic dissolution and finally, the result in cyclic polarization curves of the untreated sample there was a greater area of the hysteresis loop, implying that it is more susceptible to corrosion. This study was complemented by other techniques mentioned above in order to elucidate this study. Laser surface remelting process has definitely modified the surface film, which results in higher corrosion resistance, a large range of passivation and a lower area of the hysteresis loop.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy10.1016/j.corsci.2009.09.025 ↗
2. Excimer laser surface treatment of aluminum alloy AA7075 to improve corrosion resistance10.1016/S0257-8972(03)00850-8 ↗
3. Grain structure and homogeneity of pulsed laser treated surfaces on Al-aerospace alloys and FSWs10.1016/j.msea.2007.06.029 ↗
4. Yb-fiber beam effects on the surface modification of Al–Fe aerospace alloy obtaining weld filet strutures, low fine porosity and corrosion resistence10.1016/j.surfcoat.2011.10.007 ↗
5. AFM study of the effects of laser surface remelting on the morphology of Al–Fe aerospace alloys10.1016/j.matchar.2012.08.011 ↗
6. ASTM G59-97, Standard test method for conducting potentiodynamic polarization resistance measurements, 2009.
7. Large scale microstructuring on silicon surface in air and liquid by femtosecond laser pulses10.1016/j.apsusc.2011.08.110 ↗
8. Laser remelting of Al–1.5wt%Fe alloy surfaces: numerical and experimental analyses10.1016/j.optlaseng.2011.01.007 ↗
9. High speed laser surface modification of Ti–6Al–4V10.1016/j.surfcoat.2012.01.010 ↗
10. YAG laser cladding of homogenous coating onto magnesium alloy10.1016/j.matlet.2005.10.032 ↗
11. Thermo Calc software, Stockholm, Sweden, 2011.
12. Morphology of ablation craters generated by ultrashort laser pulses in dentin surfaces: AFM and ESEM evaluation10.1016/j.apsusc.2010.08.037 ↗
13. Characterization of polyelectrolyte microcapsules by confocal laser scanning microscopy and atomic force microscopy
14. U. Khandey, Optimization of surface roughness, material removal rate and cutting tool flank wear in turning using extended taguchi approach, Master thesis, Mechanical Engineering, National Institute of Technology Rourkela, India, 2010.
15. In situ electrochemical dissolution of the oxide barrier of porous anodic alumina fabricated by hard anodization10.1016/j.jelechem.2009.04.008 ↗
16. Porous anodic alumina formed by anodization of aluminium alloy (AA1050) and high purity aluminium10.1016/j.electacta.2009.12.054 ↗
17. Nanoporous anodic alumina obtained without protetive oxide layer by hard anodization10.1016/j.matlet.2011.09.101 ↗
18. Corrosion behaviour of AZ31B magnesium alloy in NaCl solutions saturated with CO210.1016/j.corsci.2010.12.014 ↗
19. Characterization and corrosion study of NiTi laser surface alloyed with Nb or Co10.1016/j.apsusc.2010.10.154 ↗
20. The influence of pore morphology on corrosion10.1016/S0010-938X(97)00152-2 ↗
21. Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications10.1016/S0010-938X(03)00148-3 ↗