Orientation dependence of subsurface deformation in dry sliding wear of Cu single crystals
Source abstract
Abstract
Abstract Copper single crystals grown according to the Bridgman method and having their axes 1 ¯ 1 1 or [1 1 0] aligned with the normal load axis were used for dry sliding experiments. As shown, sliding-induced severe plastic deformation occurred in the subsurface of single crystals and caused formation of a lip by mechanism of texture formation. The SEM structure of this lip was found to be composed of fragments with their shapes dependent on the single crystal orientation with respect to normal load and friction force. These fragments may be referred to as wear particles generated by shearing in planes parallel to the worn surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Nanostructures generated by explosively driven friction experiments and MD simulations10.1016/j.actamat.2009.07.034 ↗
2. Subsurface shear instability and nanostructuring of metals in sliding10.1016/j.wear.2009.06.027 ↗
3. In situ observation of wear process before and during scuffing in sliding contact10.1007/s11249-011-9817-3 ↗
4. Microstructural aspects of wear in soft tribological alloys10.1016/j.wear.2006.12.037 ↗
5. Quasi-fluid nano-layers at the interface between rubbing bodies: simulations by movable cellular automata10.1016/S0043-1648(03)00244-8 ↗
6. Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures10.1016/j.triboint.2009.10.012 ↗
7. Influence of microstructure on tribologically mixed layers10.1016/j.wear.2011.03.012 ↗
8. Dynamic recrystallization in the shear bands of Fe–Cr–Ni monocrystal: Electron backscatter diffraction characterization10.1016/j.scriptamat.2007.12.006 ↗
9. Generation of shear bands in subsurface layers of metals in sliding10.1134/S1063783408050077 ↗
10. Microstructural evolution at the worn surface: a comparison of metals and ceramics10.1016/S0043-1648(00)00476-2 ↗
11. Johnson · 1999
12. Orientation dependence of high-angle grain boundary formation during sliding wear in copper single crystals10.2320/jinstmet.74.384 ↗
13. The effects of sliding velocity and sliding time on nanocrystalline tribolayer development and properties in copper10.1016/j.wear.2008.12.102 ↗
14. Strain distribution on the surface of FCC metals under compression
15. Subsurface deformation and microcrack formation in Ti–35Nb–8Zr–5Ta–O(x) during reciprocating sliding wear10.1016/j.msec.2005.01.027 ↗
16. In-situ observation of wear particle formation on lubricated sliding surfaces10.1016/j.actamat.2011.09.046 ↗
17. Plastic flow process of surface layers in flow wear under boundary lubricated conditions10.1016/0043-1648(87)90254-7 ↗