Plastic deformation mechanism of polycrystalline copper foil shocked with femtosecond laser
Source abstract
Abstract
Abstract Plastic deformation mechanism of polycrystalline copper foil shocked with femtosecond (fs) laser has been characterized through optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Experiments of ns laser shocking copper (Cu) and fs laser shocking aluminum (Al) were also conducted for comparison. Dislocations arranged in multiple forms, profuse twins and stacking faults (SFs) coexist in the fs laser shocked copper. At small strain condition, dislocation slip is the dominant deformation mode and small amount of SFs act as complementary mechanism. With strain increasing, profuse twins and SFs form to accommodate the plastic deformation. Furthermore, new formed SFs incline to locate around the old ones because the dislocation densities there are more higher. So there is a high probability for new SFs overlapping on old ones to form twins, or connecting old ones to lengthen them, which eventually produce the phenomena that twins connect with each other or twins connect with SFs. Strain greatly influences the dislocation density. Twins and SFs are more dependent on strain rate and shock pressure. Medium stacking fault energy (SFE) of copper helps to extend partial dislocations and provides sources for forming SFs and twins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Elastic wave generation by electron bombardmentor electromagnetic wave absorption10.1063/1.1729762 ↗
2. Laser-generated stress waves10.1063/1.1653116 ↗
3. Laser shock-induced microstructural and mechanical property changes in 7075 aluminum10.1063/1.1661837 ↗
4. Physical study of laser-produced plasma in confined geometry10.1063/1.346783 ↗
5. Microscale laser shock processing-modeling, testing, and microstructure characterization10.1016/S1526-6125(01)70128-4 ↗
6. Laser shock microforming of thin sheet metals10.1016/j.apsusc.2008.10.084 ↗
7. A study on super-speed forming of metal sheet by laser shock waves10.1016/S0924-0136(02)00609-X ↗
8. Mold-free fabrication of 3D microfeatures using laser-induced shock pressure10.1016/j.apsusc.2012.12.163 ↗
9. Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel10.1016/S0921-5093(98)00889-2 ↗
10. Femtosecond-laser-induced spallation in aluminum10.1063/1.1346996 ↗
11. Measurement of transit time for femtosecond-laser-driven shock wave through aluminium films by ultrafast microscopy10.1088/0022-3727/42/4/045502 ↗
12. Generation and detection of superstrong shock waves during ablation of an aluminum surface by intense femtosecond laser pulses10.1134/S002136401113008X ↗
13. Femtosecond laser driven shock synthesis of the high-pressure phase of iron10.1016/j.apsusc.2005.01.050 ↗
14. Femtosecond laser peening of stainless steel10.2961/jlmn.2009.01.0007 ↗
15. Lee · 2008
16. Vibration assisted femtosecond laser machining on metal10.1016/j.optlaseng.2012.01.017 ↗
17. Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy10.1063/1.1481195 ↗
18. Thin-sheet-metal bending by laser peen forming with femtosecond laser10.1016/j.jmatprotec.2010.08.025 ↗
19. Non-thermal micro adjustment using ultrashort laser pulses10.2961/jlmn.2007.03.0004 ↗
20. Experimental research on laser shock forming metal foils with femtosecond laser10.1016/j.apsusc.2013.08.099 ↗
21. Numerical modeling of laser shock peening with femtosecond laser pulses and comparisons to experiments10.1016/j.apsusc.2010.02.034 ↗
22. Acoustic behavior of plastics for medical applications
23. Characterization of PVA cryogel for intravascular ultrasound elasticity imaging10.1109/TUFFC.2003.1244748 ↗
24. (PhD thesis)
25. Gneration of shock waves by laser-induced plasma in confined geometry10.1063/1.354710 ↗
26. (Ph.D. thesis)
27. Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy10.1063/1.2356310 ↗
28. Deformation twinning in polycrystalline copper at room temperature and low strain rate10.1016/j.actamat.2005.10.002 ↗
29. Laser shock compression of copper and copper-aluminum alloys10.1016/j.ijimpeng.2005.05.010 ↗
30. Effect of shock compression method on the defect substructure in monocrystalline copper10.1016/j.msea.2005.06.076 ↗
31. Effect of strain rate on microstructure of polycrystalline oxygen-free high conductivity copper severely deformed at liquid nitrogen temperature10.1016/j.actamat.2010.09.009 ↗
32. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
33. Deformation mechanism in nanocrystalline Al: partial dislocation slip10.1063/1.1594836 ↗
34. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
35. Low-temperature creep at ultra-low strain rates in pure aluminum studied by a helicoid spring specimen technique10.2320/matertrans.M2010405 ↗