Surface modification of 2205 duplex stainless steel by low temperature salt bath nitrocarburizing at 430 °C
Source abstract
Abstract
Abstract 2205 stainless steel was modified by salt bath nitrocarburizing at 430 °C in this study. The microstructure, surface hardness and erosion–corrosion resistance were systematically evaluated. Salt bath nitrocarburizing at 430 °C can form a nitrocarburized layer, and with the treated time prolong, the thickness of the layer increased. By nitrocarburizing within 8 h, only expanded austenite (S phase) formed. With treated time increased, CrN gradually diffused from the places where there were ferrite grains in the layer before nitrocarburizing. Besides, the depth increased with the nitrocarburized time and the layer grew approximately conforms to the parabolic rate law. Salt bath nitrocarburizing can effectively improve the surface hardness of 2205 DSS. The erosion–corrosion resistance was improved by salt bath nitrocarburizing and the 16 h treated sample had the best erosion–corrosion behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Inhibition effect of chromate on the passivation and pitting corrosion of a duplex stainless steel in LiBr solutions using electrochemical techniques10.1016/j.corsci.2007.03.002 ↗
2. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
3. Improvement of the cavitation erosion resistance of UNS S31803 stainless steel by duplex treatment10.1016/j.surfcoat.2010.10.014 ↗
4. Erosion–corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles10.1016/j.corsci.2006.08.023 ↗
5. A. Assmann, C.E. Foerster, F.C. Serbena, C.M. Lepienski, and A.L. Chinelatto, Mechanical and Tribological Properties of LDX2101.
6. The microstructure and properties of 17-4PH martensitic precipitation hardening stainless steel modified by plasma nitrocarburizing10.1016/j.surfcoat.2009.12.016 ↗
7. High temperature gas nitriding and tempering in 17Cr-1Ni-0.5C-0.4V steel10.1007/s12540-010-1201-6 ↗
8. Constituted oxides/nitrides on nitriding 304, 430 and 17-4 PH stainless steel in salt baths over the temperature range 723 to 923K10.1016/j.apsusc.2011.08.010 ↗
9. Solid solution nitriding technology of 15Cr–7.5Mn–2.6Mo duplex stainless steel
10. Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel10.1016/j.actamat.2006.08.014 ↗
11. Plasma nitriding of stainless steels at low temperatures10.1016/S0257-8972(99)00084-5 ↗
12. Surface nitriding of SUS 304 austenitic stainless steel by a molten salt electrochemical process10.1149/1.1764569 ↗
13. Microstructural studies of QPQ complex salt bath heat-treated steels10.1016/S0924-0136(96)00037-4 ↗
14. Advanced QPQ complex salt bath heat treatment10.1016/S0924-0136(96)02535-6 ↗
15. Effect of nitrocarburizing and post-oxidation on fatigue behavior of 35CrMo alloy steel in very high cycle fatigue regime Fatigue10.1016/j.ijfatigue.2011.01.016 ↗
16. Influence of the nitriding time in the wear behaviour of an AISI H13 steel during a crankshaft forging process10.1016/j.wear.2007.02.007 ↗
17. Low-temperature salt bath nitriding of steels10.1023/B:MSAT.0000048834.48163.2e ↗
18. Plasma nitriding of 90CrMoV8 tool steel for the enhancement of hardness and corrosion resistance10.1016/j.surfcoat.2011.03.087 ↗
19. Surface microstructure of 316L austenitic steel by the salt bath nitrocarburizing and post-oxidation process known as QPQ10.1016/j.surfcoat.2007.10.032 ↗
20. Nitriding of steel in potassium nitrate salt bath10.1016/j.scriptamat.2005.08.032 ↗
21. Surface hardening of duplex stainless steel by low temperature active screen plasma nitriding10.1016/j.surfcoat.2010.08.012 ↗
22. Surface nitriding of SUS 304 austenitic stainless steel by a molten salt electrochemical process10.1149/1.1764569 ↗
23. Corrosion behavior of nitride layer obtained on AISI 316L stainless steel via simple direct nitridation route at low temperature10.1016/j.matchemphys.2011.01.037 ↗
24. Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding10.1016/j.surfcoat.2012.01.063 ↗
25. Modification of AISI 304 stainless steel surface by the low temperature complex salt bath nitriding at 430°C10.2355/isijinternational.52.1118 ↗
26. Corrosion–erosion of nitrogen bearing martensitic stainless steels in seawater–quartz slurry10.1016/S0043-1648(01)00765-7 ↗
27. Electrochemical formation and control of chromium nitride films in molten LiCl–KCl–Li3N systems10.1016/S0013-4686(02)00137-8 ↗
28. New high temperature gas nitriding cycle that enhances the wear resistance of duplex stainless steels10.1023/B:JMSC.0000047559.15644.97 ↗
29. Plasma immersion ion implantation of stainless steel: austenitic stainless steel in comparison to austenitic–ferritic stainless steel10.1016/0257-8972(96)02880-0 ↗