High-barrier height Sn/p-Si schottky diodes with interfacial layer by anodization process
Source abstract
Abstract
Abstract We have fabricated the Sn/p-Si Schottky barrier diodes with different surface treatments. Prior to the Sn evaporation on the p-Si(0 0 1), the first kinds of samples consisted of a dip in diluted aqueous HF solution followed by a rinse in de-ionized water (sample 1, SD1), the second kinds of samples several steps of anodization in aqueous KOH solution each followed by a dip in diluted aqueous HF solution and a subsequent rinse in de-ionized water (sample 2, SD2), and the third kinds of samples one anodization step only (sample 3, SD3). We have found the lowest values of both the barrier heights and ideality factors with the diodes of preparation type SD2. The anodization, on the other hand, have increased both, the barrier heights as well as the ideality factors. The extrapolation of the barrier heights versus ideality factors plot to the ideality factor determined by the image force effect have given the laterally homogeneous barrier heights of approximately 0.75 and 0.92 eV for the SD2 and SD3 diodes. Furthermore, we have calculated a mean tunneling barrier height of χ =0.12 eV for the MIS Sn/p-Si diodes with the anodic oxide layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. S.M. Sze, Physics of Semiconductor Devices, 2nd Edition, Wiley, New York, 1981, p. 245.
2. E.H. Rhoderick, Metal–Semiconductor Contacts, Oxford University Press, Oxford, 1978, pages 121 and 136.
3. Gomila · J. Appl. Phys. · 1997 · 81 · 267410.1063/1.364305 ↗
4. Türüt · Phys. Scr. · 1996 · 53 · 11810.1088/0031-8949/53/1/023 ↗
5. Werner · Appl. Phys. · 1988 · A 47 · 29110.1007/BF00615935 ↗
6. Türüt · Physica · 1992 · B 179 · 28510.1016/0921-4526(92)90628-6 ↗
7. Singh · Solid State Electron. · 1985 · 28 · 23310.1016/0038-1101(85)90002-4 ↗
8. Saǧlam · Appl. Phys. · 1997 · A65 · 3310.1007/s003390050537 ↗
9. J.H. Werner, U. Rau, in: J.F. Luy, P. Russer (Eds.), Springer Series in Electronics and Photonics, Vol. 32, Springer, Berlin, 1994.
10. Forrest · J. Appl. Phys. · 1982 · 41 · 90
11. Forrest · J. Appl. Phys. · 1984 · 55 · 149210.1063/1.333407 ↗
12. Ashok · IEEE Electron. Dev. Lett. · 1985 · EDL-6 · 46210.1109/EDL.1985.26193 ↗
13. Hanselaer · J. Appl. Phys. · 1984 · 56 · 230910.1063/1.334265 ↗
14. Hanselaer · Appl. Phys. · 1986 · A 39 · 12910.1007/BF00616830 ↗
15. Wittmer · Phys. Rev. Lett. · 1992 · 69 · 270110.1103/PhysRevLett.69.2701 ↗
16. Wang · Phys. Rev. B · 1995 · 51 · 787810.1103/PhysRevB.51.7878 ↗
17. Onganer · Solid State Electron. · 1996 · 39 · 67710.1016/0038-1101(95)00158-1 ↗
18. Horvath · Solid State Electron. · 1998 · 42 · 22110.1016/S0038-1101(97)00235-9 ↗
19. Zs.J. Horvath, M. Adam, V. Van Tuyen, Cs. Dusco, in: J. Breza, D. Donoval, V. Drobny, F. Uherek (Eds.), Proceedings of the 2nd International Conference on Advanced Semiconductor Devices and Microsystems, ASDAM ’98, Smolenice Castle, Slovakia, 5–7 October 1998, p. 82.
20. Türüt · Solid-St. Electron. · 1992 · 35 · 83510.1016/0038-1101(92)90286-L ↗
21. W. Mönch, Semiconductor Surfaces and Interfaces, 2nd Edition, Springer, Berlin, 1995, pages 75–84, 364, 382–387.10.1007/978-3-662-03134-6 ↗
22. W. Mönch, in: I.P. Batra (Ed.), Metallization and Metal–Semiconductor Interfaces, Vol. 195, Plenum, New York, 1989, pp. 11–35.10.1007/978-1-4613-0795-2_2 ↗
23. Detavernier · J. Appl. Phys. · 1998 · 84 · 322610.1063/1.368475 ↗
24. Sullivan · J. Appl. Phys. · 1991 · 70 · 740310.1063/1.349737 ↗
25. Werner · J. Appl. Phys. · 1991 · 69 · 152210.1063/1.347243 ↗