journal article·2005-04

Deposition behaviour and morphology of Ni–SiC electro-composites under triangular waveform

F. Hu, K.C. Chan

Applied Surface Science· Volume 243· Issue 1-4
Publisher page

Abstract

Abstract The deposition behaviour and morphology of Ni–SiC electro-composites were investigated under a triangular waveform. It was found that the grain size of the Ni–SiC composites decreased with increasing average current density, and the hardness of the composites increased with decreasing nickel matrix grain size. An equivalent circuit model based on the results of electrochemical impedance spectroscopy was formulated to simulate the charge transfer process under triangular waveform. Compared with deposits produced under the direct current, the triangular waveform with relaxation time provided a higher instantaneous peak current for charge transfer, which resulted in an improvement in morphology and hardness of the composites. The mathematical model was found to be in agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Pulse electrodeposition of Ni–SiC nanocomposite10.1016/S0167-577X(01)00371-8 ↗
2. Preparation and investigation of nanostructured SiC-nickel layers by electrodeposition10.1016/S0167-2738(02)00586-6 ↗
3. Friction and wear characteristics of electroless Ni–P–PTFE composite coatings
4. Composite layers in Ni–P system containing TiO2 and PTFE10.1016/S0040-6090(99)00175-3 ↗
5. Improved corrosion resistance through microstructural modifications induced by codepositing SiC-particles with electrolytic nickel10.1016/S0010-938X(02)00220-2 ↗
6. Electrodeposition of Ni/SiC composites by pulse electrolysis10.1080/00202967.2002.11871440 ↗
7. Formation of bilayer Ni–SiC composite coatings by electrodeposition10.1016/S0257-8972(98)00589-1 ↗
8. Electrochemical codeposition of inert particles in a metallic matrix10.1007/BF00573209 ↗
9. Kinetics of electroplating process of nano sized ceramic particle/Ni composite10.1016/S0254-0584(01)00564-8 ↗
10. Electrocodeposition behavior of Ni–SiC composite under different shaped waveforms10.1016/j.apsusc.2004.03.013 ↗
11. Kinetics of the deposition of inert particles from electrolytic baths10.1149/1.2404383 ↗
12. Influence of the surface properties of silicon carbide on the process of SiC particles codeposition with nickel10.1016/S0927-7757(02)00153-X ↗
13. Morphology of nanometer-thick electrolytic copper layers investigated by atomic force microscopy10.1149/1.1391851 ↗
14. Microstructure characteristics of the nickel matrix in electrodeposited Ni–PSZ gradient coating10.1080/00202967.1998.11871212 ↗
15. Electrodeposition of zironia particles in a copper matrix10.1080/10426919908914820 ↗
16. Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles10.1016/S0257-8972(01)01336-6 ↗
17. Effects of chloride, bromide and iodide ions on internal stress in films deposited during high speed nickel electroplating from a nickel sulfamate bath10.1023/A:1003970925918 ↗
18. J.Cl. Puippe, Pulse Plating Versus DC Plating, Werner Fluhmann AG, Switzerland, 1986, pp. A1–A4.
19. Theoretic analyses of the influence of the pulse energization parameters on the collecting efficiency
20. Mechanism of copper electrodeposition by pulse current and its relation to current efficiency10.1023/A:1022649314480 ↗