Investigation of cleaning mechanisms for particle, metal ion, and organic contaminations in amorphous carbon post-CMP cleaning
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Amorphous carbon films for electronic applications10.1002/adma.202204912 ↗
2. Ultrahard bulk amorphous carbon from collapsed fullerene10.1038/s41586-021-03882-9 ↗
3. Ultrahigh selective etching of SiO2 using an amorphous carbon mask in dual-frequency capacitively coupled C4F8 / CH2F2 / O2/Ar Plasmas10.1149/1.3275710 ↗
4. Properties of fluorinated amorphous diamond like carbon films by PECVD10.1016/S0169-4332(03)00644-5 ↗
5. The effect of hole density variation in the PECVD reactor showerhead on the deposition of amorphous carbon layer10.1016/j.vacuum.2019.02.009 ↗
6. Nanoscale tribological aspects of chemical mechanical polishing: a review10.1016/j.apsadv.2022.100286 ↗
7. Hard mask and lithographic capabilities improvement by amorphous carbon step coverage optimization in high aspect ratio device pattern10.1016/j.vacuum.2018.04.005 ↗
8. Extreme ultraviolet lithography: a review10.1116/1.2794048 ↗
9. Cleaning methodology of small residue defect with surfactant in copper chemical mechanical polishing post-cleaning10.1016/j.tsf.2016.05.007 ↗
10. Minimization of chemical-mechanical planarization (CMP) defects and post-CMP cleaning10.1116/1.590901 ↗
11. Roles of colloidal silicon dioxide particles in chemical mechanical polishing of dielectric silicon dioxide10.1143/JJAP.44.8383 ↗
12. Review on copper chemical–mechanical polishing (CMP) and post-CMP cleaning in ultra large system integrated (ULSI)—An electrochemical perspective10.1016/j.electacta.2006.07.039 ↗
13. Post Cu CMP cleaning of polyurethane pad debris10.1149/2.006401jss ↗
14. J. Seo, “18 - Challenges and solutions for post-CMP cleaning at device and interconnect levels,” in Advances in Chemical Mechanical Planarization (CMP) (Second Edition), S. Babu Ed.: Woodhead Publishing, 2022, pp. 503-532.10.1016/B978-0-12-821791-7.00010-1 ↗
15. Reinhardt · 2018
16. Effect of viscosity on ceria abrasive removal during the buff clean process10.1149/2162-8777/abb8bc ↗
17. Mechanisms for nano particle removal in brush scrubber cleaning10.1016/j.apsusc.2010.10.115 ↗
18. Recent advances and future developments in PVA brush scrubbing cleaning: a review10.1016/j.mssp.2022.107122 ↗
19. Almost complete removal of ceria particles down to 10 nm size from silicon dioxide surfaces10.1149/2.0131805jss ↗
20. W. Kern, “Chapter 1 - Overview and Evolution of Silicon Wafer Cleaning Technology∗,” in Handbook of Silicon Wafer Cleaning Technology (Third Edition), K. A. Reinhardt and W. Kern Eds.: William Andrew Publishing, 2018, pp. 3–85.10.1016/B978-0-323-51084-4.00001-0 ↗
21. Jones · 1999
22. Investigation of the effect of different cleaning forces on Ce–O–Si bonding during oxide post-CMP cleaning10.1016/j.apsusc.2021.149035 ↗
23. Cleaning solutions for removal of ∼30 nm ceria particles from proline and citric acid containing slurries deposited on silicon dioxide and silicon nitride surfaces10.1149/2162-8777/ab8ffa ↗
24. Design of “low stress” post-CMP cleaning processes for advanced technology nodes10.1149/10804.0003ecst ↗
25. The electrochemical and mechanical properties of Ti incorporated amorphous carbon films in Hanks’ solution10.1016/j.apsusc.2010.03.041 ↗
26. Characterization and removal of contaminants in lithography10.1007/s11433-024-2538-9 ↗
27. Investigation of the removal mechanism in amorphous carbon chemical mechanical polishing for achieving an atomic-scale roughness10.1016/j.apsusc.2024.160721 ↗
28. Post-CMP cleaning: interaction between particles and surfaces
29. X. Yuan, H. Lei, and C. Chen, “An ethylenediaminetetraacetic acid (EDTA) surface-functionalized CeO2 composite abrasives with the effective improvement of the removal rate on glass CMP,” Ceramics International, vol. 50, no. 1, Part A, pp. 293-305, 2024/01/01/ 2024, Doi: 10.1016/j.ceramint.2023.10.103.10.1016/j.ceramint.2023.10.103 ↗
30. Chemical effect on the material removal rate in the CMP of silicon wafers10.1016/j.wear.2010.11.006 ↗
31. A novel surface treatment of carbon fiber with Fenton reagent oxidization for improved cells immobilization and xylitol fermentation10.1016/j.micromeso.2021.111318 ↗
32. Contamination mechanism of ceria particles on the oxide surface after the CMP process10.1149/2162-8777/abcf13 ↗
33. Selective fabrication of SiC/Si diodes by excimer laser under ambient conditions10.1109/LED.2015.2508479 ↗
34. The behavior of zeta potential of silica suspensions10.4236/njgc.2014.42004 ↗
35. Bond dissociation energy values in silicon-containing compounds and some of their implications10.1021/ar00068a004 ↗
36. A novel design of brush scrubbing in post-CMP cleaning10.1016/j.ijmachtools.2014.05.003 ↗
37. Graphene modified iron sludge derived from homogeneous Fenton process as an efficient heterogeneous Fenton catalyst for degradation of organic pollutants10.1016/j.micromeso.2016.02.033 ↗
38. Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (CexTiyOz)10.1002/sia.2686 ↗
39. Generation of pad debris during oxide CMP process and its role in scratch formation10.1149/1.3551507 ↗
40. G. W. Gale, R. J. Small, and K. A. Reinhardt, “4 - Aqueous Cleaning and Surface Conditioning Processes,” in Handbook of Silicon Wafer Cleaning Technology (Second Edition), K. A. Reinhardt and W. Kern Eds. Norwich, NY: William Andrew Publishing, 2008, pp. 201–265.10.1016/B978-081551554-8.50007-0 ↗