Role of grain boundary on the growth behavior of anodic film on spark plasma sintered AA6061
Source abstract
Abstract
Abstract To explore the influence of grain boundary on the growth behavior of anodic film, the grain boundary density of aluminum alloy is adjusted by spark plasma sintering (SPS) with different grain sizes and investigated by techniques including SEM, TEM, and SKP. The results indicated that a suitable grain boundary density effectively uniforms the anodizing current distribution and improves the thickness of the anodic film. In 30 min sulfuric-adipic acid anodizing, the growth rate of the film on the sintering AA6061 reaches 0.47 μm min−1, which is much higher than that of commercial AA6061 under the same conditions. However, excessive grain refinement results in the formation of fine-crystal clusters and a surge of grain boundary density. It enhances field-assistant dissolution in initial anodizing and has a direct weaken effect on the final anodic film thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Hard anodizing of AA2011-T3 Al-Cu-Pb-Bi free-cutting alloy: improvement of the process parameters10.1016/j.corsci.2018.07.004 ↗
2. Fabrication and corrosion resistance of a graphene-tin oxide composite film on aluminium alloy 606110.1016/j.corsci.2017.10.031 ↗
3. Novel anodic oxide film with self-sealing layer showing excellent corrosion resistance10.1038/s41598-017-01549-y ↗
4. Effects of graphene oxide-filled sol-gel sealing on the corrosion resistance and paint adhesion of anodized aluminum10.1016/j.apsusc.2019.02.005 ↗
5. Aluminium anodizing in selenic acid: electrochemical behaviour, porous structure, and ordering regimes10.1016/j.electacta.2019.03.098 ↗
6. Mechanical Properties of Metal Oxide Films10.1149/1.2412286 ↗
7. Control of thermal radiation in metal hole array structures formed by anisotropic anodic etching of Al10.1364/OE.26.027865 ↗
8. Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina10.1126/science.268.5216.1466 ↗
9. Square and triangular nanohole array architectures in anodic alumina10.1002/1521-4095(200102)13:3<189::AID-ADMA189>3.0.CO;2-Z ↗
10. Interfacial morphology of low-voltage anodic aluminium oxide10.1107/S0021889813018219 ↗
11. The Migration of Metal and Oxygen during Anodic Film Formation10.1149/1.2423662 ↗
12. Nucleation and growth of porous anodic films on aluminium10.1038/272433a0 ↗
13. Substrate grain boundary effects on the ordering of nanopores in anodic aluminum oxide10.1016/j.ssc.2008.09.009 ↗
14. Influence of Grain Refinement of Ti Substrates on TiO2 Nanotube Arrays Fabricated Through Anodization
15. Effect of nanostructured titanium on anodization growth of self-organized TiO2 nanotubes
16. Research on Effect Factors of Highly Ordered Porous Alumina Membrane
17. Investigating the effect of sputtering conditions on the physical properties of aluminum thin film and the resulting alumina template10.1016/j.rinp.2018.03.060 ↗
18. N, Effect of grain size on corrosion: A review
19. Pitting of 2024 alloys prepared by spark plasma sintering using powders with different sizes10.1016/j.corsci.2020.108525 ↗
20. Grain orientation effects on copper enrichment and oxygen generation during anodizing of an Al–1at.%Cu alloy10.1016/S0010-938X(02)00126-9 ↗
21. Features in aluminium alloy grains and their effects on anodizing and corrosion10.1016/j.surfcoat.2015.07.034 ↗
22. The transition from discontinuous to continuous recrystallization in some aluminium alloys: II – annealing behaviour
23. Role of Electrode Reaction Kinetics in Self-Ordering of Porous Anodic Alumina10.1016/j.electacta.2017.04.140 ↗
24. Effect of alkaline etching on microstructure and anticorrosion performance of anodic film on Al-Mg-Si alloy10.1016/j.corsci.2020.108642 ↗
25. Effect of processing parameters on pore structure and thickness of anodic aluminum oxide (AAO) tubular membranes10.1016/j.memsci.2008.03.044 ↗
26. Effect of low levels of sulphate on the current density and film morphology during anodizing of aluminium in chromic acid10.1016/j.electacta.2016.01.230 ↗
27. Self-ordering Regimes of Porous Alumina: The 10% Porosity Rule10.1021/nl025537k ↗
28. Effect of Cu addition on precipitation phases at early stage in 6082 Al-Mg-Si alloy aged
29. Alloy Designation, Processing, and Use of AA6XXX Series Aluminium Alloys10.5402/2012/165082 ↗
30. Effect of Iron-Containing Intermetallic Particles on Film Structure and Corrosion Resistance of Anodized AA2099 Alloy10.1149/2.1361809jes ↗
31. The behaviour of second phase particles during anodizing of aluminium alloys10.1016/j.corsci.2010.03.029 ↗
32. Apparent Morphology and Structure of Iron-Rich Phase in Aluminum Alloy10.4028/b-MBLl8i ↗
33. Evolution of the second phase particles during the heating-up process of solution treatment of Al–Zn–Mg–Cu alloy
34. Quantitative study of nanoscale precipitates in Al–Zn–Mg–Cu alloys with different chemical compositions10.1016/j.msea.2015.04.104 ↗
35. The influence of MgSi particle reactivity and dissolution processes on corrosion in Al–Mg–Si alloys10.1016/j.electacta.2008.05.078 ↗
36. Correlations between stress corrosion cracking, grain boundary precipitates and Zn content of Al–Mg–Zn alloys10.1016/j.jallcom.2015.09.159 ↗
37. The delamination of polymeric coatings from steel. Part 1: Calibration of the Kelvinprobe and basic delamination mechanism
38. Influences of Fe3C and pearlite on the electrochemical corrosion behaviors of low carbon ferrite steel
39. Effect of the current density on the volume expansion of the deposited thin films of aluminum during porous oxide formation10.1016/S0169-4332(03)00747-5 ↗
40. Essential anti-corrosive behavior of anodized Al alloy by applied current density10.1016/j.apsusc.2019.03.155 ↗
41. Aoyagi · 1994
42. Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment10.1016/S1359-6454(02)00598-0 ↗
43. Effect of Grain-Boundary Corrosion on Impedance Characteristics of an Aluminum-Zinc-Indium Alloy in 3.5% Sodium Chloride Solution10.5006/1.3292104 ↗
44. Recrystallization microstructures and textures in AA 5052 continuous cast and direct chill cast aluminum alloy10.1016/S0921-5093(04)00901-3 ↗
45. The transition from discontinuous to continuous recrystallization in some aluminium alloys: II – annealing behaviour10.1016/j.actamat.2004.03.030 ↗
46. Role of grain boundary engineering in the SCC behavior of ferritic–martensitic alloy HT-910.1016/j.jnucmat.2006.12.006 ↗
47. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control10.1016/j.corsci.2011.02.005 ↗
48. Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ10.1016/j.corsci.2014.04.050 ↗
49. Intergranular corrosion behavior of extruded 6005A alloy profile with different microstructures10.1007/s10853-020-04692-6 ↗
50. Effect of thermomechanical treatment on the corrosion of AA508310.1016/j.corsci.2009.10.013 ↗
51. Precipitation in an AA6111 aluminium alloy and cosmetic corrosion10.1016/j.actamat.2006.08.025 ↗
52. The role of viscous flow of oxide in the growth of self-ordered porous anodic alumina films10.1038/nmat2423 ↗
53. Comparative Study of Structure and Permeability of Porous Oxide Films on Aluminum Obtained by Single- and Two-Step Anodization10.1021/am401585q ↗
54. Discoloration of Anodized AA6063 Aluminum Alloy10.1149/2.065406jes ↗
55. Corrosion behavior of anodized Al-Cu-Li alloy: The role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
56. Effect of the anodization conditions on the growth and volume expansion of porous alumina films in malonic acid electrolyte10.1016/j.surfcoat.2015.04.030 ↗
57. The anodizing behavior of aluminum in malonic acid solution and morphology of the anodic films10.1016/j.apsusc.2012.07.139 ↗
58. In-situ optical emission spectrometry during galvanostatic aluminum anodising10.1016/j.electacta.2010.10.092 ↗
59. Electronic properties of electrolyte/anodic alumina junction during porous anodizing10.1016/j.apsusc.2006.10.038 ↗