Pre-hydrolysed ethyl silicate as an alternative precursor for SiO2-coated carbon nanofibers
Source abstract
Abstract
Abstract This work reported basically aims at understanding the extent of SiO 2 -coated carbon nanofibers using two different sol–gel precursors for the silicate glass. The silicate precursors employed were tetraethoxysilane (TEOS) and pre-hydrolysed ethyl silicate. The first route consisted in an acid hydrolysis and polycondensation of the TEOS and the second one in a polycondensation of the pre-hydrolysed ethyl silicate. The techniques of Fourier Infra Red spectroscopy, thermogravimetric analysis, scanning electron microscopy and X-ray diffraction were used to characterize the materials obtained. Both kinds of SiO 2 precursor can coat the CNF effectively. However, the use of pre-hydrolysed ethyl silicate (faster gelation times and higher surface areas) can be considered a low-cost and facile alternative with respect to the use of TEOS, to obtain industrially silica-coated carbon nanofibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Supercapacitor Materials and Fabrication · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Carbon nanotubes
2. Formation of carbon fibers from benzene10.1016/0008-6223(72)90086-3 ↗
3. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
4. Nanobeam mechanics: elasticity, strength and thoughness of nanorods and nanotubes10.1126/science.277.5334.1971 ↗
5. The effect of surface modification on the friction and wear behaviour of carbon nanofiber-filled PTFE composites10.1016/j.wear.2007.06.014 ↗
6. Carbon nanotube quamtum resistors10.1126/science.280.5370.1744 ↗
7. Nanotubes for electronics10.1038/scientificamerican1200-62 ↗
8. Carbon nanofibres and activated carbon nanofibres as electrodes in supercapacitors10.1016/j.carbon.2004.10.018 ↗
9. Novel processing and characterization of Cu/CNF nanocomposite for high thermal conductivity applications10.1016/j.compscitech.2009.06.023 ↗
10. Improving thermal conductivity while retaining high electrical resistivity of epoxi composites by incorporating silica-coated multi-walled carbon nanotubes10.1016/j.carbon.2010.09.047 ↗
11. Preparation of CNFs surface to coat with copper by electroless process10.1016/j.matlet.2007.05.061 ↗
12. Mechanical reinforcement of polymers using carbon nanotubes10.1002/adma.200501851 ↗
13. Conductive CNF-reinforced hybrid composites by injection moulding10.1016/j.compstruct.2009.11.017 ↗
14. An investigation of the sliding wear behaviour of Cu-matrix composite reinforced by carbon nanotubes10.1016/S0921-5093(01)00963-7 ↗
15. SiC/SiO2 coating for improving the oxidation resistive property of carbon nanofiber10.1016/j.apsusc.2010.08.104 ↗
16. A facile method to fabricate silica-coated carbon nanotubes and silica nanotubes from carbon nanotubes templates10.1007/s10853-009-3687-1 ↗
17. Multifunctional properties of alumina composites reinforced by hybrid filler10.1111/j.1744-7402.2008.02257.x ↗
18. Borosilicate glass matrix composites containing multi-wall carbon nanotubes10.1016/j.jeurceramsoc.2004.05.015 ↗
19. Preparation and characterization of carbon nanotube reinforced silicon nitride composites10.1016/j.msec.2003.09.085 ↗
20. Reinforcement of mullite matrix with multi-walled carbon nanotubes10.1016/j.ceramint.2005.12.009 ↗
21. Tribological properties of hot-pressed alumina-CNT composites10.1016/S0043-1648(03)00216-3 ↗
22. Fabrication and mechanical properties of SiO2 matrix composites reinforced by carbon nanotube10.1016/S0921-5093(03)00256-9 ↗
23. Fabrication and dielectric properties of CNTs/SiO2 composites10.4028/www.scientific.net/KEM.280-283.123 ↗
24. Fabrication of carbon nanotube reinforced alumina matrix nanocomposite by sol–gel process10.1016/j.msea.2004.12.031 ↗
25. Surfactants assisted processing of nanotube-reinforced SiO2 matrix composites10.1016/S0272-8842(03)00063-4 ↗
26. Fabrication and properties of carbon nanotube/SiO2 composites10.4028/www.scientific.net/KEM.249.1 ↗
27. Review article: polymer–matrix nanocomposites, processing, manufacturing, and application: an overview10.1177/0021998306067321 ↗
28. New carbon multiwall nanotubes–TiO2 nanocomposites obtained by the sol–gel method10.1016/j.jnoncrysol.2004.08.104 ↗
29. Synthesis and characterization of carbon nanotubes–TiO2 nanocomposites10.1016/j.carbon.2003.12.041 ↗
30. Al2O3–TiO2 thin films on glass substrate by sol–gel technique10.1016/j.matchar.2006.05.015 ↗
31. In situ ion-beam analysis and modification of sol–gel zircona thin films10.1016/0168-583X(95)00816-0 ↗
32. Investigation on properties o V2O5–MWCNTs composites as cathode materials10.1007/s10971-008-1708-1 ↗
33. On the optical, structural, and morphological properties of ZrO2 and TiO2 dip-coated thin films supported on glass substrates10.1016/j.matchar.2005.05.004 ↗
34. Characterization and catalytic activity studies of sol–gel Co–SiO2 nanocomposites10.1016/S1044-5803(03)00073-1 ↗
35. Silica hybrid particles with nanometre polymer shells and their influence on the toughening of polypropylene10.1039/b9nr00344d ↗
36. Preparation and characterization of magnetic carbon nanomaterials bearing APTS-silica on their surface10.1007/s10853-009-4052-0 ↗