journal article·2016-05

In situ measurement of conductivity during nanocomposite film deposition

Christoph O. Blattmann, Sotiris E. Pratsinis

Publisher page

Abstract

Abstract Flexible and electrically conductive nanocomposite films are essential for small, portable and even implantable electronic devices. Typically, such film synthesis and conductivity measurement are carried out sequentially. As a result, optimization of filler loading and size/morphology characteristics with respect to film conductivity is rather tedious and costly. Here, freshly-made Ag nanoparticles (nanosilver) are made by scalable flame aerosol technology and directly deposited onto polymeric (polystyrene and poly(methyl methacrylate)) films during which the resistance of the resulting nanocomposite is measured in situ. The formation and gas-phase growth of such flame-made nanosilver, just before incorporation onto the polymer film, is measured by thermophoretic sampling and microscopy. Monitoring the nanocomposite resistance in situ reveals the onset of conductive network formation by the deposited nanosilver growth and sinternecking. The in situ measurement is much faster and more accurate than conventional ex situ four-point resistance measurements since an electrically percolating network is detected upon its formation by the in situ technique. Nevertheless, general resistance trends with respect to filler loading and host polymer composition are consistent for both in situ and ex situ measurements. The time lag for the onset of a conductive network (i.e., percolation) depends linearly on the glass transition temperature (Tg) of the host polymer. This is attributed to the increased nanoparticle-polymer interaction with decreasing Tg. Proper selection of the host polymer in combination with in situ resistance monitoring therefore enable the optimal preparation of conductive nanocomposite films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Nanoparticles: synthesis and applications · Gold and Silver Nanoparticles Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Wafer-scale design of lightweight and transparent electronics that wraps around hairs10.1038/ncomms3982 ↗
2. Reliable stretchable gold interconnects in biocompatible elastomers10.1002/polb.23064 ↗
3. Flexible foldable, actively multiplexed, high-density electrode array for mapping brain activity in vivo10.1038/nn.2973 ↗
4. Rapid synthesis of flexible conductive polymer nanocomposite films10.1088/0957-4484/26/12/125601 ↗
5. Improvement of mechanical durability on organic TFT with printed electrodes prepared from nanoparticle ink10.1016/j.apsusc.2013.12.168 ↗
6. Miniature supercapacitors based on nanocomposite thin films10.1016/j.mee.2013.01.030 ↗
7. Inkjet printing of conductive inks with high lateral resolution on omniphobic RF paper for paper-based electronics and MEMS10.1002/adma.201401053 ↗
8. In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics10.1088/0957-4484/23/48/485205 ↗
9. In-situ resistance measurements during pulsed laser deposition of ultrathin films10.1016/S0169-4332(96)00376-5 ↗
10. In situ resistivity measurements during the atomic layer deposition of ZnO and W thin films10.1063/1.1490413 ↗
11. Atomic layer deposition of ultrathin copper metal films from a liquid copper(I) amidinate precursor10.1149/1.2338632 ↗
12. Thickness dependent electrical resistivity of ultrathin (<40nm) Cu films10.1016/S0040-6090(00)01818-6 ↗
13. In situ monitoring of a flash light sintering process using silver nano-ink for producing flexible electronics10.1088/0957-4484/24/3/035202 ↗
14. Flexible and stretchable electrodes for dielectric elastomer actuators10.1007/s00339-012-7402-8 ↗
15. Flexible and biocompatible microelectrode arrays fabricated by supersonic cluster beam deposition on SU-810.1088/0960-1317/21/4/045013 ↗
16. Morphology of flame-generated soot as determined by thermophoretic sampling10.1021/la00074a019 ↗
17. Embedding of noble metal nanoclusters into polymers as a potential probe of the surface glass transition10.1021/ma0008600 ↗
18. Size-dependent melting point of noble metals10.1016/S0254-0584(03)00201-3 ↗
19. Morphology and crystallinity of coalescing nanosilver by molecular dynamics10.1021/acs.jpcc.5b01491 ↗
20. Gas phase production of particles in reactive turbulent flows10.1016/0021-8502(91)90017-C ↗
21. Growth of zirconia particles made by flame spray pyrolysis10.1002/aic.10272 ↗
22. Theoretical study of the bonding of NO2 to Cu and Ag10.1063/1.469937 ↗
23. Thermal behavior of silver nanoparticles for low-temperature interconnect applications10.1007/s11664-005-0229-8 ↗
24. Influence of thermal treatment on the morphology and adhesion of gold films on trimethylcyclohexane-polycarbonate10.1016/S0169-4332(99)00266-4 ↗
25. Electrical resistivity of assembled transparent inorganic oxide nanoparticle thin layers: influence of silica, insulating impurities, and surfactant layer thickness10.1021/am300319r ↗