Rapid structural evolution and bone inducing mechanism of the multilayer coating with silicon-doped hydroxyapatite crystals on the microwave water steaming-hydrothermally treated titania coating
Source abstract
Abstract
Abstract To reveal the formation mechanism of new bone tissues induced by the multilayer titania coating with silicon-doped hydroxyapatite (Si-HA), plasma electrolyte oxidation (PEO) and microwave steam-hydrothermal treatment (MG) were performed to form Si-HA nanorods rapidly on the PEO coating. In the present work, the length and diameter of Si-HA nanorods on the MG-treated PEO coating for 10 min (PEOMG10) were smaller than that those treated for 60 min (PEOMG60). The microstructure of the multilayer coating, including the porous middle layer containing anatase nanocrystal cluster, the middle anatase layer, Si-HA nanocrystals, and the outermost layer that grew Si-HA nanorods, was revealed by transmission electron microscopy (TEM). The in vitro mineralization test indicates that the PEOMG60 sample exhibits excellent apatite-inducing ability because of its high degradation. The in vivo animal experiment showed that the PEOMG10 implant has high interfacial bonding strength and excellent osseointegration interface status. The fracture for the PEOMG10 implant occurred at the interface between the coating and the bone side owing to its good interface status. The present study can expand the widespread applications of the titania-based hydroxyapatite composite materials for repairing hard tissues and teeth filling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Structure, MC3T3-E1 cell response, and osseointegration of macroporous titanium implants covered by a bioactive microarc oxidation coating with microporous structure10.1021/am405680d ↗
2. Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior
3. Electrochemical deposition and characterization of hydroxyapatite (HAp) on titanium substrate10.1016/j.apcbee.2012.06.044 ↗
4. Electrochemically assisted co-precipitation of protein with calcium phosphate coating on titanium alloy10.1016/j.biomaterials.2003.12.045 ↗
5. Kuo Yung Hung, Sung-Cheng Lo, Chung-Sheng Shih, et al. Titanium surface modified by hydroxyapatite coating for dental implants . Surface & Coatings Technology, 2013, 231(9):337-345.10.1016/j.surfcoat.2012.03.037 ↗
6. Biaxial Residual Stress States of Plasma Sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate10.1016/S0142-9612(99)00272-0 ↗
7. Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA10.1016/j.apsusc.2006.11.012 ↗
8. Influence of surface structures on biocompatibility of TiO2 /HA coatings prepared by MAO10.1016/j.matchemphys.2018.05.037 ↗
9. Rapidly formation of the highly bioactive surface with hydroxyapatite crystals on the titania micro arc oxidation coating by microwave hydrothermal treatment
10. TEM analysis and in vitro and in vivo biological performance of the hydroxyapatite crystals rapidly formed on the modified microarc oxidation coating using microwave hydrothermal technique
11. Synergistic effects of surface chemistry and topologic structure from modified microarc oxidation coatings on Ti implants for improving osseointegration10.1021/acsami.5b02226 ↗
12. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
13. In vitro osteoblast response to anodized titanium and anodized titanium followed by hydrothermal treatment10.1002/jbm.a.10490 ↗
14. Hydroxyapatite formation on oxide films containing Ca and P by hydrothermal treatment10.1016/j.ceramint.2005.04.006 ↗
15. Effect of hydrothermal treatment model on the formation of Sr-HA nanorod arrays on microarc oxidized titania coatings10.1016/j.apsusc.2013.09.097 ↗
16. The effect of NaOH concentration on the steam-hydrothermally treated bioactive microarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface10.1016/j.msec.2015.01.062 ↗
17. A comparative study on the in vivo behavior of hydroxyapatite and silicon substituted hydroxyapatite granules10.1023/A:1021114710076 ↗
18. Ultrastructural comparison of dissolution and apatite precipitation on hydroxyapatite and silicon-substituted hydroxyapatite in vitro and in vivo10.1002/jbm.a.30035 ↗
19. The osteogenic capacity of biomimetic hierarchical micropore /nanorod-patterned Sr-HA coatings with different interrod spacing10.1016/j.nano.2016.01.011 ↗
20. Direct role of interrod spacing in mediating cell adhesion on Sr-HA nanorod-patterned coatings
21. Advanced Mg, Zn, Sr, Si Multi-Substituted Hydroxyapatites for Bone Regeneration10.2147/IJN.S226630 ↗
22. Sr-substituted hydroxyapatites for osteoporotic bone replacement10.1016/j.actbio.2007.05.006 ↗
23. Substituted hydroxyapatites for bone regeneration: A review of current trends10.1002/jbm.b.33651 ↗
24. Biomimetic synthesis of Ag, Zn or Co doped HA and coating of Ag, Zn or Co doped HA/fMWCNT composite on functionalized Ti10.1016/j.msec.2019.02.025 ↗
25. Research of Cu-Doped Hydroxyapatite Microbeads Fabricated by Pneumatic Extrusion Printing10.3390/ma12111769 ↗
26. Paints and varnishes-Cross-cut test for films, EN ISO 2409:2013; International Organization for Standardization (ISO): Geneva, Switzerland, 2013.
27. Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium10.1021/acsbiomaterials.9b00414 ↗
28. Surface Energetics of the Hydroxyapatite Nanocrystal-Water Interface: A Molecular Dynamics Study10.1021/la503158p ↗
29. Silicon substitution in the calcium phosphate bioceramics10.1016/j.biomaterials.2007.05.003 ↗
30. Ionic substitutions in calcium phosphates synthesized at low temperature10.1016/j.actbio.2009.12.041 ↗
31. Li B, Gao P, Zhang H, et al. Osteoimmunomodulation, osseointegration, and in vivo mechanical integrity of pure Mg coated with HA nanorod/pore-sealed MgO bilayer. Biomaterials science, 2018, 6(12): 3202-3218.10.1039/C8BM00901E ↗
32. Li B, Han Y, Li M. Enhanced osteoblast differentiation and osseointegration of a bio-inspired HA nanorod patterned pore-sealed MgO bilayer coating on magnesium . Journal of Materials Chemistry B, 2016, 4(4): 683-693.10.1039/C5TB02101D ↗
33. The osteogenic capacity of biomimetic hierarchical micropore/nanorod-patterned Sr-HA coatings with different interrod spacings10.1016/j.nano.2016.01.011 ↗
34. Zhou J, Bo L, Zhao L, et al. F-doped micropores/nanorods hierarchically patterned coatings for improving antibacterial and osteogenic activities of bone implants in bacteria-infected case. 2016, 3, 1437−1450.10.1021/acsbiomaterials.6b00710 ↗