journal article·2024-03

Enhanced electrochemical performance and interdiffusion behavior of sodium ions in onion-derived freeze-dried and KOH-activated carbon for sodium-ion battery anodes

Injun Jeon, Taegyun Kim, Jangwon Seo, Il-Kyoung Jeong, Jin Hong Lee, Minjoon Park, Yiseul Park, Dingcheng Yang, Chae Ryong Cho

Publisher page

Abstract

Biomass-derived carbon materials are widely regarded as promising anode materials for sodium-ion batteries (SIBs) owing to their environmental friendliness, high electronic conductivity, stability, and low cost. However, their commercial application is restricted because of their low capacities and poor cycling stabilities. Heteroatom doping and increasing the active specific surface area of carbon materials have proven to be key to solving these problems. In this study, a facile activation and annealing process combined with freeze drying and KOH treatment was used to successfully prepare nitrogen-doped onion-derived carbon materials (dried onion (DO) and freeze-dried onion (FDO)) with high specific surface areas. The obtained carbon materials exhibited excellent electrochemical performances as anodes for SIBs, delivering high discharge reversible capacities of 140.5 (DO) and 151.4 (FDO) mAh/g at a current density of 0.05 A/g after 30 cycles. The capacities reached 45 (DO) and 66 (FDO) mAh/g at 30 A/g. Specifically, FDO//Na3V2(PO4)3@C full cells achieved a reversible capacity of 43.9 mAh/g with a specific energy of 91.5 Wh kg−1 at 5 C after 1,000 cycles, indicating that it provides broad prospects for the energy storage system of SIBs. © 2023 Elsevier B.V. ; FALSE ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
2. Nanocomposite materials for the sodium-ion battery: A review10.1002/smll.201702514 ↗
3. Sodium and sodium-ion batteries: 50 years of research10.1002/aenm.201703137 ↗
4. Electrical energy storage for the grid: A Battery of Choices10.1126/science.1212741 ↗
5. Research development on sodium-ion batteries10.1021/cr500192f ↗
6. Construction of hollow core-shell Sb2S3/S@S-doped C composite based on complexation reaction for high performance anode of sodium-ion batteries10.1016/j.apsusc.2022.156111 ↗
7. Hydrogen passivated beta(12)-borophene nanoribbon: A propitious one-dimensional metallic anode for sodium-ion rechargeable batteries10.1016/j.apsusc.2022.154825 ↗
8. Synergistic effect of NaTi2(PO4)3 and MXene synthesized in situ for high-performance sodium-ion capacitors10.1016/j.apsusc.2022.155960 ↗
9. Alloy anodes for sodium-ion batteries10.1007/s12598-020-01605-z ↗
10. Conversion-type MnO nanorods as a surprisingly stable anode framework for sodium-ion batteries
11. Recent progress in rational design of anode materials for high-performance Na-ion batteries
12. Recent advances in nanostructured carbon for sodium-ion batteries10.1039/C9TA09984K ↗
13. Synchronously improved graphitization and surface area in a 3D porous carbon network as a high capacity anode material for lithium/sodium-ion batteries10.1039/D0TA10179F ↗
14. Nanoengineering of advanced carbon materials for sodium-ion battery10.1002/smll.202007431 ↗
15. Cation-vacancy ordered superstructure enhanced cycling stability in tungsten bronze anode10.1002/aenm.202201967 ↗
16. Atomic Short-Range Order in a Cation-Deficient Perovskite Anode for Fast-Charging and Long-Life Lithium-Ion Batteries10.1002/adma.202200914 ↗
17. Preparation of carbon nanosheets from petroleum asphalt via recyclable molten-salt method for superior lithium and sodium storage10.1016/j.carbon.2017.06.086 ↗
18. Biomass-derived carbon for high-performance batteries: from structure to properties
19. Biomass-derived carbons for sodium-ion batteries and sodium-ion capacitors10.1002/cssc.201902685 ↗
20. Recent progress in biomass-derived carbon materials used for secondary batteries10.1039/D1SE00265A ↗
21. Biomass resources in Portugal: Current status and prospects10.1016/j.rser.2017.03.140 ↗
22. Tailoring MXene-based materials for sodium-ion storage: synthesis, mechanisms, and applications10.1007/s41918-020-00079-y ↗
23. 3D Amorphous carbon with controlled porous and disordered structures as a high-rate anode material for sodium-ion batteries10.1002/aenm.201702434 ↗
24. Sodium niobate with a large interlayer spacing: a fast-charging, long-life, and low-temperature friendly lithium-storage material
25. Sustainable porous carbons from garlic peel biowaste and KOH activation with an excellent CO2 adsorption performance10.1007/s13399-019-00412-6 ↗
26. The role of temperature on physical-chemical properties of green synthesized porous carbon nanoparticles10.1007/s12649-019-00675-0 ↗
27. Impact of electrode porosity architecture on electrochemical performances of 1 mm-thick LiFePO4 binder-free Li-ion electrodes fabricated by Spark Plasma Sintering10.1016/j.jpowsour.2020.229402 ↗
28. Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium-sulfur battery10.1016/j.electacta.2011.03.005 ↗
29. Intense Raman D band without disorder in flattened carbon nanotubes10.1021/acsnano.0c06048 ↗
30. Effect of fiber microstructure studied by Raman spectroscopy upon the mechanical properties of carbon fibers10.1002/jrs.5569 ↗
31. Using anion-exchange to induce the formation of edge defects in CoNx to enhance ORR activity10.1002/cctc.202200146 ↗
32. Key features of polyimide-derived carbon molecular sieves10.1002/anie.202106740 ↗
33. In-situ study on structure evolution and gasification reactivity of biomass char with K and Ca catalysts at carbon dioxide atmosphere br
34. Review-hard carbon negative electrode materials for sodium-ion batteries10.1149/2.0091514jes ↗
35. Incorporating pyrrolic and pyridinic nitrogen into a porous carbon made from C60 molecules to obtain superior energy storage10.1002/adma.201603414 ↗
36. Partially reduced holey graphene oxide as high performance anode for sodium-ion batteries10.1002/aenm.201803215 ↗
37. Engineering the trap effect of residual oxygen atoms and defects in hard carbon anode towards high initial Coulombic efficiency10.1016/j.nanoen.2019.103937 ↗
38. Insights into electrochemical oxidation of NaO2 in Na–O2 batteries via rotating ring disk and spectroscopic measurements10.1021/acsami.6b08355 ↗
39. Boosting capacitive sodium-ion storage in electrochemically exfoliated graphite for sodium-ion capacitors10.1021/acsami.0c14611 ↗
40. Carbonaceous anode materials for non-aqueous sodium- and potassium-ion hybrid capacitors10.1021/acsenergylett.1c01855 ↗
41. Construction of grain boundary for accelerated ionic diffusion in Ta5+-substituted Na3V2(PO4)3 with high performance for full sodium ion batteries10.1016/j.apsusc.2023.158213 ↗
42. Hollow carbon nanospheres coated by delta-MnO2 as S host to enhance the catalytic conversion of polysulfides in Li-S batteries10.1016/j.apsusc.2022.152498 ↗
43. Advanced energy storage devices: basic principles, analytical methods, and rational materials design10.1002/advs.201700322 ↗
44. BiVO4 fern architectures: a competitive anode for lithium-ion batteries10.1002/cssc.201701483 ↗
45. Rice-panicle-like gamma-Fe2O3@C nanofibers as high-rate anodes for superior lithium-ion batteries10.1016/j.cej.2018.09.017 ↗
46. A Flower-Like Sb4O5Cl2 Cluster-based material as anode for potassium ion batteries10.1016/j.apsusc.2022.152509 ↗
47. Hard carbon composite electrodes for sodium-ion batteries with nano-zeolite and carbon black additives10.1002/batt.202000161 ↗
48. Investigation of electrochemical sodium-ion intercalation behavior into graphite-based electrodes10.1149/2.0431903jes ↗
49. Synergistically enhanced electrochemical performance of hierarchical MoS2/TiNb2O7 hetero-nanostructures as anode materials for Li-ion batteries10.1021/acsnano.6b07666 ↗
50. Achieving high initial Coulombic efficiency for competent Na storage by microstructure tailoring from chiral nematic nanocrystalline cellulose10.1002/cey2.198 ↗
51. A new electrolyte formulation for securing high temperature cycling and storage performances of Na-ion batteries10.1002/aenm.201901431 ↗
52. Temperature dependent electrochemical performance of graphite anodes for K-ion and Li-ion batteries10.1016/j.jpowsour.2018.11.007 ↗
53. Temperature-dependent lithium-ion diffusion and activation energy of Li1.2Co0.13Ni0.13Mn0.54O2 thin-film cathode at nanoscale by using electrochemical strain microscopy10.1021/acsami.6b16321 ↗
54. Determination of activation energy for Li ion diffusion in electrodes10.1021/jp8099576 ↗
55. Evaluation of present accelerated temperature testing and modeling of batteries10.3390/app8101786 ↗
56. 3D ordered porous hybrid of ZnSe/N-doped carbon with anomalously high Na+ mobility and ultrathin solid electrolyte interphase for sodium-ion batteries10.1002/adfm.202106194 ↗
57. Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance
58. Highly nitrogen doped carbon nanofibers with superior rate capability and cyclability for potassium ion batteries10.1038/s41467-018-04190-z ↗