Amoxicillin doped hyaluronic acid/fucoidan multifunctional coatings for medical grade stainless steel orthopedic implants
Source abstract
Abstract
This work investigated the potential of amoxicillin-doped hyaluronic acid/fucoidan multifunctional coatings on medical grade stainless steel as biocompatible, osteointegration enhancing, antimicrobial, and bacterial biofilm inhibiting coatings for orthopedic implants. The coatings were prepared by layer-by-layer spin coating and confirmed by optical contact angle goniometry and infrared spectroscopy. Time-of-flight secondary ion mass spectrometry showed a homogeneous distribution of the individual layers. In contrast, thermal diffusivity, and thermal conductivity measurements by photothermal beam deflection spectrometry showed diffusion of the amoxicillin into the hyaluronic acid and fucoidan layers. In vitro release of amoxicillin showed complete release within one hour, as reflected by the formation of inhibition zones against Staphylococcus aureus and Escherichia coli. Synergistic effects were observed between the hyaluronic acid and amoxicillin in inhibiting S.Aureus biofilm, and between the fucoidan and amoxicillin in improving the antioxidant properties by an ABTS radical scavenging assay. Biocompatibility was determined with human osteoblasts, confirming the potential of such multifunctional coatings to enhance the bioactivity of steel-based orthop edic implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Marine Biology and Environmental Chemistry · Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. E.U. OECD, Health at a Glance: Europe 2016: State of Health in the EU Cycle, OECD Publishing, Paris, 2016.
2. The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant10.1016/j.apsusc.2013.10.029 ↗
3. Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications10.1038/srep26653 ↗
4. Surface treatment functionalization of sodium hydroxide onto 3D printed porous Ti6Al4V for improved biological activities and osteogenic potencies
5. Mechanical and in vitro biological properties of uniform and graded Cobalt-chrome lattice structures in orthopedic implants10.1002/jbm.b.34857 ↗
6. Orthopaedic Osseointegration: State of the Art10.5435/JAAOS-D-19-00016 ↗
7. Near-infrared light II - assisted rapid biofilm elimination platform for bone implants at mild temperature10.1016/j.biomaterials.2020.120634 ↗
8. Synergistic antibacterial activity of physical-chemical multi-mechanism by TiO 2 nanorod arrays for safe biofilm eradication on implant
9. Bioactive Coatings for Orthopaedic Implants — Recent Trends in Development of Implant Coatings10.3390/ijms150711878 ↗
10. Polysaccharide-based antibiofilm surfaces10.1016/j.actbio.2015.11.010 ↗
11. Osteoinduction, osteoconduction and osseointegration10.1007/s005860100282 ↗
12. Direct Loading and Tunable Release of Antibiotics from Polyelectrolyte Multilayers To Reduce Bacterial Adhesion and Biofilm Formation10.1021/acs.bioconjchem.6b00118 ↗
13. Tunable Drug Release from Hydrolytically Degradable Layer-by-Layer Thin Films10.1021/la0476480 ↗
14. Polyelectrolyte Multilayers for Tunable Release of Antibiotics10.1021/bm800185h ↗
15. Polysaccharide-Coated Thermosets for Orthopedic Applications: From Material Characterization to In Vivo Tests10.1021/bm3002683 ↗
16. G. Giammona, G. Pitarresi, F.S. Palumbo, S. Maraldi, S. Scarponi, C.L. Romano, Hyaluronic-Based Antibacterial Hydrogel Coating for Implantable Biomaterials in Orthopedics Trauma: From Basic Research to Clinical Applications, in: S. Haider, A. Haider (Eds.), Hydrogels, IntechOpen, 2018: pp. 179–200. https://doi.org/10.5772/intechopen.73203.10.5772/intechopen.73203 ↗
17. Hyaluronic acid: A unique topical vehicle for the localized delivery of drugs to the skin10.1111/j.1468-3083.2004.01180.x ↗
18. Collagen and hyaluronan at wound sites influence early polymicrobial biofilm adhesive events10.1186/1471-2180-14-191 ↗
19. Ribeiro · Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions · 2012 · 2 · 176
20. P. Be, L. Bret, L. Cre, Orthopaedic-implant infections by Escherichia coli : Molecular and phenotypic analysis of the causative strains, (2012). https://doi.org/10.1016/j.jinf.2011.11.010.10.1016/j.jinf.2011.11.010 ↗
21. T. Shimazaki, H. Miyamoto, Y. Ando, I. Noda, Y. Yonekura, S. Kawano, M. Miyazaki, M. Mawatari, T. Hotokebuchi, In vivo antibacterial and silver-releasing properties of novel thermal sprayed silver-containing hydroxyapatite coating, J. Biomed. Mater. Res. Part B Appl. Biomater. 92B (2010) 386–389. https://doi.org/https://doi.org/10.1002/jbm.b.31526.10.1002/jbm.b.31526 ↗
22. Inhibition of implant-associated infections via nitric oxide release10.1016/j.biomaterials.2005.05.017 ↗
23. Gentamycin delivered from a PDLLA coating of metallic implants In vivo and in vitro characterisation for local prophylaxis of implant-related osteomyelitis
24. Jean-Marc Pradier, The antibacterial activity of Magainin I immobilized onto mixed thiols Self-Assembled Monolayers10.1016/j.biomaterials.2009.03.025 ↗
25. Intravenous Amoxicillin-Sulbactam against Escherichia Coli : Optimizing the Dose, Component Ratio and Infusion Time Using a Human Pharmacodynamic Model intravenous Amoxicillin-Sulbactam against Escherichia coli : Optimizing the Dose
26. Yao · Amoxicillin Administration Regimen and Resistance Mechanisms of Staphylococcus aureus Established in Tissue Cage Infection Model · 2019 · 10 · 1
27. Bioactive Functional Nanolayers of Chitosan − Lysine Surfactant with Single- and Mixed-Protein-Repellent and Antibio film Properties for Medical Implants10.1021/acsami.1c01993 ↗
28. Drug Delivery from Hyaluronic Acid–BDDE Injectable Hydrogels for Antibacterial and Anti-Inflammatory Applications
29. Biocompatible hyaluronic acid-divinyl sulfone injectable hydrogels for sustained drug release with enhanced antibacterial properties against Staphylococcus aureus
30. Nanostructured hyaluronic acid-based hydrogels encapsulating synthetic / natural hybrid nanogels as promising wound dressings
31. Isolation Characterization, and Antioxidant Activity Evaluation of a Fucoidan from an Enzymatic Digest of the Edible Seaweed, Hizikia fusiforme10.3390/antiox9050363 ↗
32. Therapies from Fucoidan: New Developments10.3390/md17100571 ↗
33. Anti-inflammatory and antioxidant activities of the Impatiens noli-tangere and Stachys officinalis polyphenolic-rich extracts10.1016/j.bjp.2017.10.008 ↗
34. The choice between hip prosthetic bearing surfaces in total hip replacement: a protocol for a systematic review and network meta-analysis10.1186/s13643-016-0189-5 ↗
35. Cost and utilization of healthcare services for hip and knee replacement10.3111/13696998.2013.802695 ↗
36. G. Horvat, K. Xhanari, L. Gradiˇ, Novel ethanol-induced pectin – xanthan aerogel coatings for orthopedic applications, 166 (2017) 365–376. https://doi.org/10.1016/j.carbpol.2017.03.008.10.1016/j.carbpol.2017.03.008 ↗
37. Application of complex geometrical optics to determination of thermal, transport, and optical parameters of thin films by the photothermal beam deflection technique10.1364/JOSAA.32.000061 ↗
38. H. Cabrera, D. Korte, H. Budasheva, B. Abbasgholi N Asbaghi, S. Bellucci, Through-Plane and In-Plane Thermal Diffusivity Determination of Graphene Nanoplatelets by Photothermal Beam Deflection Spectrometry, Mater. (Basel, Switzerland). 14 (2021) 7273. https://doi.org/10.3390/ma14237273.10.3390/ma14237273 ↗
39. Production and characterization of bacterial cellulose membranes with hyaluronic acid from chicken comb10.1016/j.ijbiomac.2017.01.077 ↗
40. Incompatibility of Paracetamol with Pediatric Suspensions Containing Amoxicillin, Azithromycin and Cefuroxime Axetil10.4236/pp.2017.811026 ↗
41. Application of pH-Responsive Fucoidan/Chitosan Nanoparticles to Improve Oral Quercetin Delivery10.3390/molecules24020346 ↗
42. Thermal lens effect in electrolyte and surfactant media10.1021/j100170a057 ↗
43. Bactericidal coating to prevent early and delayed implant-related infections10.1016/j.jconrel.2020.06.014 ↗
44. Antioxidant acitivity of low molecular weight hyaluronic acid10.1016/j.fct.2011.07.020 ↗
45. Antimicrobial Susceptibility Profile of Pseudomonas aeruginosa Isolates in Egypt10.1016/j.juro.2008.03.081 ↗
46. Activity and penetration of fosfomycin, ciprofloxacin, amoxicillin/clavulanic acid and co-trimoxazole in Escherichia coli and Pseudomonas aeruginosa biofilms10.1016/j.ijantimicag.2007.05.005 ↗
47. In vitro trials of some antimicrobial combinations against Staphylococcus aureus and Pseudomonas aeruginosa10.1016/j.sjbs.2012.10.005 ↗
48. Antibiotic resistance pattern of Pseudomonas aeruginosa isolated from urine samples of Urinary Tract Infections patients in Karachi, Pakistan, Pakistan
49. Following the Mechanisms of Bacteriostatic versus Bactericidal Action Using Raman Spectroscopy10.3390/molecules181113188 ↗
50. Influence of femtosecond laser produced nanostructures on biofilm growth on steel10.1016/j.apsusc.2017.02.174 ↗
51. Antibacterial activity and mechanisms of depolymerized fucoidans isolated from Laminaria japonica10.1016/j.carbpol.2017.05.060 ↗
52. Hyaluronan Modulation Impacts Staphylococcus aureus Biofilm Infection10.1128/IAI.01418-15 ↗
53. Bacteriostatic properties of biomatrices against common orthopaedic pathogens10.1016/j.bbrc.2004.06.165 ↗
54. On the bacteriostatic activity of hyaluronic acid composite films10.1016/j.carbpol.2021.117803 ↗
55. The development and characterization of bioactive coatings for local drug delivery in orthopedic applications10.1016/j.porgcoat.2021.106350 ↗
56. Dexamethasone-Loaded Bioactive Coatings on Medical Grade Stainless Steel Promote Osteointegration10.3390/pharmaceutics13040568 ↗