Double core–shell structure H-TiO2/C/Fe3O4@rGO for Li+ battery anodes with long cyclability
Source abstract
Abstract
Abstract Anode materials are critical for storage devices based on Li+ batteries (LIBs). This work reports a facile method to produce hydrogenated oxygen vacancy defect TiO2 coated core-shell C/Fe3O4@rGO (H-TiO2/C/Fe3O4@rGO) composite. The volume expansion coefficient of TiO2 in the process of deintercalating lithium ions is about 4%, which can maintain the stable performance of the structure. However, hydrogen engineering can improve its reduced conductivity (i.e., ~1 * 10−12 S/m). The Fe3O4 volume expansion during LIB cycling was inhibited by the hydrogenated oxygen vacancy defect TiO2 (H-TiO2). The H-TiO2/C/Fe3O4@rGO composite showed outstanding electrochemical properties (867 mAh g−1 after 200 cycles at 0.3 A g−1), and long cycle performance (505 mAh g−1 after 700 cycles at 1.0 A g−1).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
3. Ternary Fe2O3/Fe3O4/FeCO3 composite as a high-performance anode material for lithium-ion batteries10.1021/acs.jpcc.9b02132 ↗
4. Nano-sized transitionmetal oxides as negative-electrode materials for lithium-ion batteries10.1038/35035045 ↗
5. Revisiting the origin of cycling enhanced capacity of Fe3O4 based nanostructured electrode for lithium ion batteries
6. Carbon layer encapsulated Fe3O4@reduced graphene oxide lithium battery anodes with long cycle performance10.1016/j.ceramint.2020.02.041 ↗
7. High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications10.1038/nmat1672 ↗
8. In-situ insertion of multi-walled carbon nanotubes in the Fe3O4/N/C composite derived from iron-based metal-organic frameworks as a catalyst for effective sensing acetaminophen and metronidazole10.1016/j.talanta.2018.09.065 ↗
9. Copper oxide nanoparticles are highly toxic: a comparison between metal oxide nanoparticles and carbon nanotubes10.1021/tx800064j ↗
10. Fe3O4 nanoparticles confi ned in mesocellular carbon foam for high performance anode materials for lithium-ion batteries10.1002/adfm.201002576 ↗
11. Bottom-up in situ formation of Fe3O4 nanocrystals in a porous carbon foam for lithium-ion battery anodes10.1039/c1jm13450g ↗
12. Gphene-wrapped Fe3O4 anode aterial with improved reversible capacity and cyclic tability for ithium ion batteries10.1021/cm101532x ↗
13. Fe3O4-graphene nanocomposites with improved lithium storage and magnetism properties10.1021/jp201666s ↗
14. E. Yoo, J. Kim, E. Hosono, H.-S. Zhou, T. Kudo, I. Honma, Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries, Nano Lett. 8.10.1021/nl800957b ↗
15. A hierarchical porous architecture of silicon@TiO2@carbon composite novel anode materials for high performance Li-ion batteries10.1039/C9NJ03708J ↗
16. Off-stoichiometric TiO2-x-decorated graphite anode for high-power lithium-ion batteries10.1016/j.jallcom.2020.156042 ↗
17. Nanolaminated ZnO-TiO2 coated lithium-rich layered oxide cathodes by atomic layer deposition for enhanced electrochemical performances10.1016/j.jallcom.2020.155845 ↗
18. Electronic conductivity in nanostructured TiO2 films permeated with electrolyte10.1002/pssa.200306430 ↗
19. Hollow Fe3O4/C spheres as superior lithium storage materials10.1016/j.jpowsour.2011.09.029 ↗
20. Dealloyed Fe3O4 octahedra as anode material for lithium-ion batteries with stable and high electrochemical performance10.1016/j.jallcom.2014.08.081 ↗
21. Mechanochemical synthesis of InP nanoparticles embedded in hybrid conductive matrix for high-performance lithium-ion batteries
22. G. Major, N. Fairley, P. Sherwood, M. Linford, J. Terry, V. Fernandez, K. Artyushkova, Practical guide for curve fitting in x-ray Artyushkova, Practical guide for curve fitting in x-ray photoelectron spectroscopy, J. Vac. Sci. Technol. A 38 (2020) Document number 061203.10.1116/6.0000377 ↗
23. Quick one-pot synthesis of amorphous carbon-coated cobalt-ferrite twin elliptical frustums for enhanced lithium storage capability10.1039/C7TA02136D ↗
24. Electrocatalytic activity of transition metal oxide-carbon composites for oxygen reduction in alkaline batteries and fuel cells10.1149/2.109308jes ↗
25. Carbon coated transition metal borates as anode materials for Na-ion batteries10.1016/j.cej.2019.121998 ↗
26. Rationally designed hierarchical TiO2@Fe2O3 hollow nanostructures for improved lithium ion storage10.1002/aenm.201200953 ↗
27. Rational design of three-dimensional graphene encapsulated with hollow FeP@carbon nanocomposite as outstanding anode ma-terial for lithium ion and sodium ion batteries10.1021/acsnano.7b06625 ↗
28. Enhanced cycling stability of lithium-ion batteries using graphene-wrapped Fe3O4-graphene nanoribbons as anode materials10.1002/aenm.201500171 ↗
29. Enhanced electrochemical performance of MnO nanowire/graphene composite during cycling as the anode material for lithium-ion batteries10.1016/j.nanoen.2014.09.012 ↗
30. Synthesis of nitrogen-doped MnO/graphene nanosheets hybrid material for lithium ion batteries10.1021/am201173z ↗
31. Vinylene carbonate-LiNO3: A hybrid additive in carbonic ester electrolytes for SEI modification on Li metal anode10.1016/j.elecom.2014.12.008 ↗