Effect of double thermal and electrochemical oxidation on titanium alloys for medical applications
Source abstract
Abstract
The research focuses on the development and characterization of innovative thin hybrid oxide coatings obtained in subsequent processes of thermal (TO) and electrochemical (EO) oxidation. Four different surface modifications were investigated and the microstructure was determined, the mechanical, chemical and biological properties of the Ti-13Nb-13Zr alloy were assessed using scanning electron microscopy, X-ray dispersion analysis, glow discharge emission spectroscopy, Raman spectroscopy, nanoindentation and corrosion resistance measurements. The composite layers were evaluated for antimicrobial activity, cytotoxicity bioassays and wettability tests were performed. The conducted studies of two-stage oxidation (TO + EO) have shown that it is possible to obtain layers with a different structure - crystalline and nanotubular. The formation of a nanotube layer on the surface of the crystalline layer is dependent on the thickness of the crystalline layer. The produced double titanium oxide coatings show high surface roughness, high corrosion resistance, are hydrophilic, slightly antibacterial, and not cytotoxic, which has a huge impact on the process of connecting the tissue with the implant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Structural and phase changes under electropulse treatment of fatigue-loaded titanium alloy VT1-010.1016/j.jmrt.2018.09.008 ↗
2. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
3. A. Alsaran, G. Purcek, I. Hacisalihoglu, Y. Vangolu, O. Bayrak, I. Karaman, A. Celik, Hydroxyapatite production on ultrafine-grained pure titanium by micro-arc o.xidation and hydrothermal treatment, Surf. Coat. Technol. 205 (2011) S537–S542. https://doi:10.1016/j.surfcoat.2011.03.032.10.1016/j.surfcoat.2011.03.032 ↗
4. Bioactivity and corrosion properties of novel coatings containing strontium by micro-arc oxidation10.1016/j.jallcom.2010.08.057 ↗
5. Evaluation of microstructure variation of TC11 alloy after electroshocking treatment10.1016/j.jmrt.2019.12.076 ↗
6. Enhanced surface strengthening of titanium treated by combined surface deep-rolling and oxygen boost diffusion technique10.1016/j.corsci.2019.05.020 ↗
7. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
8. Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function10.1016/S0142-9612(99)00181-7 ↗
9. Mechanical properties of different nanopatterned TiO2 substrates and their effect on hydrothermally synthesized bioactive hydroxyapatite coatings10.3390/ma13225290 ↗
10. Fibrous capsule formation around titanium and copper10.1002/jbm.a.31575 ↗
11. Engineering Thick Tissues – The Vascularisation Problem10.22203/eCM.v014a01 ↗
12. Modifying the properties of titanium surface with the aim of improving its bioactivity and corrosion resistance10.1016/S0924-0136(03)00398-4 ↗
13. Improvement of in vitro titanium bioactivity by three different surface treatments10.1016/j.dental.2005.03.012 ↗
14. Biomaterials, Biomechanics, Tissue Healing, and Immediate-Function Dental Implants10.1563/0712.1 ↗
15. S. Izman, M.R.A. Kadir, M. Anwar, E.M. Nazim, R. Rosliza, E.M. Abdullah, M.A. Hassan, Surface modification techniques for biomedical grade of titanium alloys: oxidation, carburization and ion implantation processes, in Titanium Alloys - Towards Achieving Enhanced Properties, for Diversified Applications 9 (2012) 201–228. doi:10.5772/36318.10.5772/36318 ↗
16. Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface10.1016/j.wear.2019.05.007 ↗
17. Enhanced in-vitro osteoblastic functions on _-type titanium alloy using surface mechanical attrition treatment10.1016/j.msec.2018.12.082 ↗
18. Osteogrowth induction titanium surface treatment reduces ROS production of mesenchymal stem cells increasing their osteogenic commitment10.1016/j.msec.2016.12.032 ↗
19. Effect of chemical surface treatment of titanium on its bond with dental ceramics10.1016/j.prosdent.2017.11.025 ↗
20. A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials10.1016/j.ceramint.2017.10.162 ↗
21. Nanotubular oxide layers and hydroxyapatite coatings on porous titanium alloy Ti13Nb13Zr10.1515/adms-2017-0046 ↗
22. Improving biocompatibility of titanium alloy scafolds by calcium incorporated silicalite-1 coatings10.1016/j.inoche.2019.02.004 ↗
23. Electrophoretic deposition of chitosan reinforced graphene oxide-hydroxyapatite on the anodized titanium to improve biological and electrochemical characteristics10.1016/j.msec.2018.12.136 ↗
24. Development of graphene oxide/calcium phosphate coating by pulse electrodeposition on anodized titanium: Biocorrosion and mechanical behavior10.1016/j.jmbbm.2018.11.011 ↗
25. Photoactive TiO2 coatings obtained by plasma electrolytic oxidation in refrigerated electrolytes10.1016/j.apsusc.2016.05.032 ↗
26. Determination of nanoscale titanium oxide thin film phase composition using X-ray photoelectron spectroscopy valence band analysis10.1016/j.tsf.2019.04.044 ↗
27. Black titanium dioxide for photocatalysis10.1016/bs.semsem.2017.04.001 ↗
28. Photocatalytic surfaces obtained through one-step thermal spraying of titanium10.1016/j.apsusc.2019.144173 ↗
29. Integration of BMP, Wnt, and notch signaling pathways in osteoblast differentiation10.1002/jcb.23287 ↗
30. Decreased oxygen tension lowers reactive oxygen species and apoptosis and inhibits osteoblast matrix mineralization through changes in early osteoblast differentiation10.1002/jcp.22841 ↗
31. Design of bioactive bone substitutes based on biomineralization process10.1016/j.msec.2005.01.002 ↗
32. In Vivo Evaluation of Anodic TiO2 Nanotubes, An Experimental Study in the Pig10.1002/jbm.b.31201 ↗
33. Bio-inspired nanofunctionalization of biomaterial surface: a review10.1049/bsbt.2019.0009 ↗
34. The effects of micro arc oxidation of gamma titanium aluminide surfaces on osteoblast adhesion and differentiation10.1007/s10856-014-5179-3 ↗
35. Morphology and properties of nanotubular oxide layer on the Ti13Zr13Nb alloy10.1016/j.surfcoat.2014.06.054 ↗
36. A. Ossowska, A. Zieliński, M. Supernak, Electrochemical oxidation and corrosion resistance of the Ti13Nb13Zr alloy, Biomaterials, XVI (122-123) (2013) 4-6. http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-818f0ea0-1df0-4fe2-9af9-4033012c1da1 (accessed 10 November 2013).
37. Tick rutile layer on titanium for tribological applications10.1016/j.triboint.2005.08.004 ↗
38. Fabrication and characterization of oxygen-diffused titanium for biomedical applications10.1016/j.actbio.2009.06.011 ↗
39. Optimization of oxidation temperature for commercially pure titanium to achieve improved corrosion resistance
40. A brief review of corrosion protective films and coatings based on graphene and graphene oxide10.1016/j.jallcom.2018.06.133 ↗
41. Microstructure, mechanical properties and oxidation behaviors of magnetron sputtered NbNx coatings10.1016/j.jallcom.2016.03.109 ↗
42. High temperature oxidation behavior and research status of modifications on improving high tempreture oxidation resistance of titanium alloy ant titanium aluminides: A review10.1016/j.jallcom.2016.06.212 ↗
43. Cyclic thermal oxidation evaluation to improve Ti6Al4V surface in applications as biomaterial10.1007/s11665-019-04220-x ↗
44. The improvement of wettability, biotribological behavior and corrosion resistance of titanium alloy pretreated by thermal oxidation10.1016/j.triboint.2014.06.008 ↗
45. Development of surface structure and characteristics of thermally oxidized β-Ti alloy for biomedical applications10.1088/2053-1591/ab3d98 ↗
46. Investigation of high temperature behavior and processing map of Ti-6Al-4V-0.11Ru titanium alloy10.1016/j.jallcom.2019.02.046 ↗
47. Study of titanium alloy Ti6242S oxidation behaviour in air at 560°C: Effect of oxygen dissolution on lattice parameters10.1016/j.corsci.2019.06.004 ↗
48. Effect of nitrogen on the kinetics of oxide scale growth and of oxygen dissolution in the Ti6242S titanium-based alloy10.1007/s11085-017-9729-1 ↗
49. Titanium-zinc polycitrate precursor: Influence of thermal treatment on structural, thermal, optical characteristics of zinc titanates10.1016/j.matchemphys.2019.121768 ↗
50. Singh On the ground state of TiO2 as predicted by all electron density functional calculations in relation to experiment10.1140/epjb/e2017-80476-9 ↗
51. A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation10.1016/j.actamat.2019.12.026 ↗
52. Biocompatibility of TiO2 nanotubes with different topographies10.1002/jbm.a.34738 ↗
53. Influence of morphology and crystalline structure of TiO2 nanotubes on their electrochemical properties and apatite-forming ability10.1016/j.electacta.2017.05.160 ↗
54. Investigating the structure and biocompatibility of niobium and titanium oxides as coatings for orthopedic metallic implants10.1016/j.msec.2015.09.059 ↗
55. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation10.1016/j.msec.2018.10.068 ↗
56. Nanosize and vitality: TiO2 nanotube diameter directs cell fate10.1021/nl070678d ↗
57. Enhanced osteoblast adhesion to drug-coated anodized nanotubular titanium surfaces
58. The influence of hierarchical hybrid micro/nano-textured titanium surface with titania nanotubes on osteoblast functions10.1016/j.biomaterials.2010.03.014 ↗
59. D.M. Brunette, Principles of cell behavior on titanium surfaces and their application to implanted devices, in: W: Brunette D.M. et al. (Eds.): Titanium in Medicine: Material Science, Surface Science, Biological Responses and Medical Applications, Springer, Heidelberg, Berlin, 2001, pp. 485–512. https://www.researchgate.net/profile/Marcus-Textor/publication/224766482_Surface_composition_and_topography_of_titanium_alloy_implants/links/55d4ddc508ae6788fa35273c/Surface-composition-and-topography-of-titanium-alloy-implants.pdf (accessed 15 February 2021).10.1007/978-3-642-56486-4_15 ↗
60. Size-effects in TiO2 nanotubes: Diameter dependent anatase/rutile stabilization10.1016/j.elecom.2011.03.003 ↗
61. Nanoindentation study of the mechanical behavior of TiO2 nanotube arrays10.1063/1.4932213 ↗
62. Influence of Two-Stage Anodization on Properties of the Oxide Coatings on the Ti–13Nb–13Zr Alloy10.3390/coatings10080707 ↗
63. Thermal oxidation of vanadium-free Ti alloys: an X-ray photoelectron spectroscopy study10.1016/j.msec.2010.01.004 ↗
64. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution10.1016/S0142-9612(03)00252-7 ↗
65. Influence of fluoride content and pH on corrosion and tribocorrosion behavior of Ti13Nb13Zr alloy in oral environment10.1016/j.jmbbm.2015.05.008 ↗
66. Surface characterization and biocompatibility of titanium alloys implanted with nitrogen by Hardion plus technology
67. The preparation and characterization of La doped TiO2 nanoparticles and their photocatalytic activity10.1016/j.jssc.2004.05.064 ↗
68. Raman microprobe study of nanophase TiO2 and oxidation-induced spectral changes10.1557/JMR.1990.1246 ↗
69. Raman spectroscopy study of the phase transformation on nanocrystalline titania films prepared via metal organic vapour deposition10.1007/s10854-008-9595-3 ↗
70. Understanding the effect ofsurface/bulk defects on the photocatalytic activity of TiO2: anatase versusrutile10.1039/c3cp50927c ↗
71. Characterization of the structure, thermal stability and wettabilityof the TiO2 nanotubes growth on the Ti–7.5Mo alloy surface10.1016/j.apsusc.2016.02.017 ↗
72. Effect of magnetoelectropolishing on nanohardness and Young's modulus of titanium biomaterial10.1016/j.matlet.2012.06.010 ↗
73. Critical Review of Analysis and Interpretation of nanoindentation test data10.1016/j.surfcoat.2005.03.018 ↗
74. J.R. Tuck, A.M. Korsunsky, D.G. Bhat, S.J. Bull, Indentation hardness evaluation of cathodic arc deposited thin hard coatings. Surf. Coat. Technol. 139 (2001) 63-74. http://nanoproductengineering.com/papers/34.pdf (accessed 8 January 2021).10.1016/S0257-8972(00)01116-6 ↗
75. Instrumented indentation of layered ceramic materials10.4028/www.scientific.net/KEM.333.107 ↗
76. Hirvonen · 1980
77. Sol–gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement10.1016/S0040-6090(03)00146-9 ↗
78. Anti-corrosion performance of oxidized and oxygen plasma-implanted NiTi alloys10.1016/j.msea.2004.08.061 ↗
79. Properties of Composite Oxide Layers on The Ti13Nb13Zr Alloy10.1080/02670844.2017.1305657 ↗
80. Diameter of titanium nanotubes influences anti-bacterial efficacy10.1088/0957-4484/22/29/295102 ↗
81. The relationship between the nanostructure of titanium surfaces and bacterial attachment10.1016/j.biomaterials.2009.09.081 ↗
82. Decreased Staphylococcus aureus biofilm growth on anodized nanotubular titanium and the effect of electrical stimulation10.1016/j.actbio.2011.04.002 ↗
83. Impact of nanoscale roughness of titanium thin film surfaces on bacterial retention10.1021/la902623c ↗
84. The evaluation of the impact of titania nanotube covers morphology and crystal phase on their biological properties
85. Anodic titanium dioxidenanotubes for magnetically guided therapeutic delivery
86. TiO2 nanotube platforms for smart drug delivery: a review.Int10.2147/IJN.S108847 ↗
87. Recent progress in biomedical applications of titanium dioxide10.1039/c3cp43938k ↗
88. Improved antibacterial activity and biocompatibility on vancomycin-loaded TiO2 nanotubes: in vivo and in vitro studies. Int10.2147/IJN.S53221 ↗
89. Inhibited bacterial biofilm formation and improved osteogenic activity on gentamicin-loaded titania nanotubes with various diameters
90. A Review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parameters10.1016/j.jmrt.2020.10.088 ↗
91. Enhancement of materials properties of titanium through heat treatment process: A brief review
92. Structural features and corrosion analysis of thermally oxidized titanium10.1016/j.jallcom.2009.02.079 ↗
93. Effect of thermal oxidation process on fatigue behavior of Ti-4Al-2V alloy10.1016/j.surfcoat.2008.08.038 ↗
94. Thermal oxidation of Ti6Al4V alloy: microstructural and electrochemical Characterization10.1016/j.matchemphys.2009.09.007 ↗
95. Composite coatings formed on Ti by POE and fluoropolymer treatment10.1016/j.apsusc.2020.147976 ↗
96. Rf-GDOES depth profiling analysis of a monolayer of thiourea adsorbed on copper10.1039/b400918p ↗
97. Nitriding iron at lower temperatures10.1126/science.1080216 ↗
98. Wang Z.B., Tao N.R., Tong W.P., Lu J., Lu K., Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment10.1016/S1359-6454(03)00260-X ↗
99. An electrochemical study on self-ordered nanoporous and nanotubular oxide on Ti-35Nb-5Ta-7Zr alloy for biomedical applications10.1016/j.actbio.2009.02.017 ↗
100. Review of titania nanotubes: Fabrication and cellular response10.1016/j.ceramint.2012.03.002 ↗