journal article·2020-08

Surface organic modified magnesium titanate particles with three coupling agents: Characterizations, properties and potential application areas

Haoxuan Sun, Yanli Qi, Jun Zhang

Publisher page

Abstract

Abstract Magnesium titanate (MT), as one of the important dielectric materials, is widely used as dielectric resonators for the low dielectric loss and good temperature stability. However, the agglomerate behavior of MT particles limit the application areas in organic materials, especially for polymer materials. In this work, the surface of MT particles was modified by three coupling agents, i.e. bis-(γ-triethoxysilylpropyl) tetrasulphide (Si69), γ-(methacryloyloxy) propyltrimethoxysilane (KH570) and stearic acid (SA). Modification effects were characterized via Fourier transform infrared (FTIR) and contact angle analysis. These characterizations showed an excellent surface modification effect, especially for samples modified by Si69 and SA. The contact angle test presents that the surface of modified MT particles was transformed from hydrophilic (35°) to hydrophobic (135°). The content of coupling agent on particle’s surface was investigated by thermal gravimetric analysis (TGA). X-ray diffractometer (XRD) results indicate that surface modification has no effect on the type of MT particle’s crystals. Surprisingly, Ultraviolet–Visible-Near infrared (UV–Vis-NIR) measurement shows that MT particles present a better solar reflectance effect than titanium dioxide. The micro-morphology of particles is analyzed by Scanning electron microscope (SEM). Herein, the potential application areas of surface organic modified MT particles can be used in polymer-ceramic composites and solar reflectance materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Aerogels and thermal insulation · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Modeling the electrical conduction in epoxy-BaTiO3 nanocomposites10.1007/s11664-013-2523-1 ↗
2. Solar reflectance, surface adhesion, and thermal conductivity of wood/natural rubber composite sheet with TiO2/polyurethane topcoat for roofing applications10.1002/vnl.20302 ↗
3. A review of current coupling agents for modification of metal oxide nanoparticles10.1016/j.porgcoat.2015.05.023 ↗
4. Surface functionalization of coal powder with different coupling agents for potential applications in organic materials10.1016/j.apsusc.2014.06.115 ↗
5. Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites – a review10.1016/j.progpolymsci.2013.02.003 ↗
6. In-situ synthesis of hydrophobic SiO2-PMMA composite for surface protective coatings: experimental and quantum chemical analysis10.1016/j.polymer.2015.09.030 ↗
7. Effect of post annealing on structural, optical and dielectric properties of MgTiO3 thin films deposited by RF magnetron sputtering10.1016/j.apsusc.2012.09.168 ↗
8. Defects, dopants and Mg diffusion in MgTiO310.1038/s41598-019-40878-y ↗
9. Bismuth titanate as an infrared reflective pigment for cool roof coating10.1016/j.solmat.2017.09.048 ↗
10. SrTiO3 as a new solar reflective pigment on the cooling property of PMMA-ceramic composites10.1016/j.ceramint.2019.05.124 ↗
11. Self-cleaning building materials: the multifaceted effects of titanium dioxide10.1016/j.conbuildmat.2018.06.047 ↗
12. Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions10.1016/j.solener.2010.12.023 ↗
13. A new member of solar heat-reflective pigments: BaTiO3 and its effect on the cooling properties of ASA (acrylonitrile-styrene-acrylate copolymer)10.1016/j.solmat.2018.02.027 ↗
14. Textured magnesium titanate as gate oxide for GaN-based metal-oxide-semiconductor capacitor10.1111/j.1551-2916.2011.04439.x ↗
15. Surface modification of TiO2 nanoparticle by three-dimensional silane coupling agent and preparation of polyamide/modified-TiO2 nanocomposites for removal of Cr (VI) from aqueous solutions10.1016/j.porgcoat.2017.04.044 ↗
16. Thermal degradation of poly(caprolactone), poly(lactic acid), and poly(hydroxybutyrate) studied by TGA/FTIR and other analytical techniques10.1007/s00289-017-2260-3 ↗
17. Surface modification of basalt with silane coupling agent on asphalt mixture moisture damage10.1016/j.apsusc.2015.04.002 ↗
18. Recent progress in the determination of solid surface tensions from contact angles10.1016/j.cis.2006.11.024 ↗
19. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
20. Hydrophobic surface modification of TiO2 nanoparticles for production of acrylonitrile-styrene-acrylate terpolymer/TiO2 composited cool materials
21. Near infrared reflectance properties of metal oxide nanoparticles10.1021/jp066363o ↗
22. Spectrophotometric method for optical band gap and electronic transitions determination of semiconductor materials10.1016/j.optmat.2016.11.014 ↗
23. Application of rutile and anatase onto cotton fabric and their effect on the NIR reflection/surface temperature of the fabric10.1016/j.solmat.2014.12.011 ↗
24. The effects of particle size distribution on the optical properties of titanium dioxide rutile pigments and their applications in cool non-white coatings10.1016/j.solmat.2014.06.035 ↗
25. A novel perspective for reflective cooling composites: Influence of the difference between the effective refractive index of polymeric matrix and inorganic functional particles10.1016/j.conbuildmat.2019.07.226 ↗
26. Itinerant-electron ferromagnetism in a titanium-rich magnesium titanate ilmenite solid solution10.1021/jp107698j ↗