Preparation and characterization of PVDF separators for lithium ion cells using hydroxyl-terminated polybutadiene grafted methoxyl polyethylene glycol (HTPB-g-MPEG) as additive
Source abstract
Abstract
Abstract Hydroxyl-terminated polybutadiene grafted methoxyl polyethylene glycol (HTPB-g-MPEG) with different arm length were synthesized by grafting methoxyl poly(ethylene glycol)s (MPEGs, Mn = 350, 750, 1900 and 5000, respectively) to the hydroxyl-terminated polybutadiene (HTPB) molecule using isophorone diisocyanate (IPDI) as the coupling agent, and blended with PVDF to fabricate porous separators via phase inversion process. By measuring the composition, morphology and ion conductivity etc., the influence of HTPB-g-MPEG on structure and property of blend separators were discussed. Compared with pure PVDF separator with comparable porous structure, the adoption of HTPB-g-MPEG could not only decrease the crystallinity, but also enhance the stability of entrapped liquid electrolyte and corresponding ion conductivity. The cells assembled with such separators showed good initial discharge capacity and cyclic stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A porous poly(vinylidene fluoride) gel electrolyte for lithium ion batteries prepared by using salicylic acid as a foaming agent10.1016/j.jpowsour.2008.09.100 ↗
2. Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries10.1016/j.memsci.2008.08.047 ↗
3. Self-supported poly(methyl methacrylate-acrylonitrile-vinyl acetate)-based gel electrolyte for lithium ion battery10.1016/j.jpowsour.2008.10.027 ↗
4. Gel electrolyte for lithium-ion batteries10.1016/j.electacta.2007.10.058 ↗
5. From vinylidene fluoride (VDF) to the applications of VDF-containing polymers and copolymers: recent developments and future trends10.1021/cr800187m ↗
6. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
7. Polymer composites and blends for battery separators: State of the art, challenges and future trends10.1016/j.jpowsour.2015.02.010 ↗
8. Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties10.1016/j.memsci.2013.05.028 ↗
9. Novel polymer electrolyte based on PVDF/HDPE blending for lithium-ion battery10.1016/j.matlet.2013.03.033 ↗
10. Composition-dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene]–poly(ethylene oxide) blends10.1007/s10853-013-7141-z ↗
11. Poly(vinylidene fluoride)-based, co-polymer separator electrolyte membranes for lithium-ion battery systems10.1016/j.jpowsour.2013.06.151 ↗
12. Gel polymer electrolyte-based on PVDF/fluorinated amphiphilic copolymer blends for high performance lithium-ion batteries10.1039/C4RA04443F ↗
13. Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process10.1016/j.memsci.2008.09.022 ↗
14. Macroporous polymer electrolytes based on PVDF/PEO-b-PMMA block copolymer blends for rechargeable lithium ion battery10.1016/j.memsci.2009.02.018 ↗
15. In-situ characterization of the cure reaction of HTPB and IPDI by simultaneous NMR and IR measurements10.1016/j.polymertesting.2010.03.001 ↗
16. Preparation and characterization of gel polymer electrolytes containing N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide ionic liquid for lithium ion batteries10.1016/j.electacta.2012.10.018 ↗
17. Graft copolymers of polyurethane with various vinyl monomers via radiation-induced miniemulsion polymerization: influential factors to grafting efficiency and particle morphology10.1016/j.radphyschem.2008.08.005 ↗
18. Effect of degree of porosity on the properties of poly(vinylidene fluoride–trifluorethylene) for Li-ion battery separators10.1016/j.memsci.2012.03.044 ↗
19. Preparation and Properties of Poly (vinylidene fluoride)/poly(dimethylsiloxane) graft (poly(propylene oxide)-block-poly(ethylene oxide)) blend porous separators and corresponding electrolytes10.1016/j.electacta.2013.11.076 ↗
20. Microporous gel electrolytes based on amphiphilic poly(vinylidene fluoride-co-hexafluoropropylene) for lithium batteries10.1016/j.apsusc.2012.01.146 ↗
21. PVdF-HFP/P123 hybrid with mesopores: a new matrix for high-conducting, low-leakage porous polymer electrolyte10.1016/j.polymer.2005.05.077 ↗
22. Exploring polymeric lithium tartaric acid borate for thermally resistant polymer electrolyte of lithium batteries10.1016/j.electacta.2013.01.026 ↗
23. Polyethylene separator activated by hybrid coating improving Li + ion transference number and ionic conductivity for Li-metal battery10.1016/j.jpowsour.2017.01.006 ↗
24. A thin inorganic composite separator for lithium-ion batteries10.1016/j.memsci.2016.02.047 ↗
25. High performance separator coated with amino-functionalized SiO2 particles for safety enhanced lithium-ion batteries10.1016/j.memsci.2017.04.042 ↗