journal article·2019-12

Three-dimensionally ordered macroporous Fe-doped ceria catalyst with enhanced activity at a wide operating temperature window for selective catalytic reduction of NOx

Hao Liu, Yaohui Wu, Liuhui Liu, Bingxian Chu, Zuzeng Qin, Guangzhou Jin, Zhangfa Tong, Lihui Dong, Bin Li

Publisher page

Abstract

Abstract A series of three-dimensional ordered macroporous (3DOM) Ce-Fe composite oxides are synthesized for selective catalytic reduction of NOx by CO. The optimized 3DOM Ce0.6Fe0.4O2 catalyst has nearly 90% NO conversion at a relatively low temperature (200 °C) and high catalytic activity in a wide operating temperature window of 200–700 °C. Adding appropriate amount of Fe into pure cerium can form Ce-Fe solid solution, which can promote the reduction performance and further improve oxygen vacancies and active oxygen species. Meanwhile, the introduction of Fe further improves the specific surface area and pore volume of the 3DOM structure, which provides more active sites and improves the more effective contact between the reaction gas and the catalyst. Moreover, surface Fe2O3 can be used as a storage site for nitrite and nitrate and promote the adsorption of NOx species, which can be further desorbed/converted/dissociated. It can be seen that the reduction of NO by CO follows the Eley-Rideal (E-R) mechanism, which can be proved by in situ DRIFTS. There is no doubt that the coexistence of Ce-Fe solid solution and Fe2O3 in 3DOM Ce0.6Fe0.4O2 catalyst is the key reason for the excellent catalytic activity of NO + CO reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Nanomaterials for catalytic reactions · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. The simultaneous purification of PM and NOx in diesel engine exhausts over a single 3DOM Ce0.9−xFe0.1ZrxO2 catalyst10.1039/C7EN00170C ↗
2. Simultaneous NOx and particulate matter removal from diesel exhaust by hierarchical Fe-doped Ce–Zr oxide10.1021/acscatal.6b03387 ↗
3. One-step synthesis of nanostructured Pd-doped mixed oxides MOx-CeO2 (M = Mn, Fe, Co, Ni, Cu) for efficient CO and C3H8 total oxidation10.1016/j.apcatb.2008.08.017 ↗
4. Insight into the mesoporous FexCe1−xO2−δ catalysts for selective catalytic reduction of NO with NH3: regulable structure and activity10.1016/j.jcat.2016.02.009 ↗
5. Mn-modified CuO, CuFe2O4, and γ-Fe2O3 three-phase strong synergistic coexistence catalyst system for NO reduction by CO with a wider active window10.1021/acsami.8b13220 ↗
6. A highly effective catalyst of Sm-MnOx for the NH3-SCR of NOx at low temperature: promotional role of Sm and its catalytic performance10.1021/acscatal.5b00747 ↗
7. In situ FT-infrared investigation of CO or/and NO interaction with CuO/Ce0.67Zr0.33O2 catalysts10.1016/j.apcatb.2009.04.019 ↗
8. Investigation of the NO removal by CO on CuO–CoOx binary metal oxides supported on Ce0.67Zr0.33O210.1016/j.apcatb.2009.02.021 ↗
9. A comparative study of different doped metal cations on the reduction, adsorption and activity of CuO/Ce0.67M0.33O2 (M = Zr4+, Sn4+, Ti4+) catalysts for NO + CO reaction10.1016/j.apcatb.2012.11.020 ↗
10. Preparation and evaluation of copper–manganese oxide as a high-efficiency catalyst for CO oxidation and NO reduction by CO10.1021/acs.jpcc.7b02052 ↗
11. Catalytic reduction of NO by CO over promoted Cu3Ce0.2Al0.8 composite oxides derived from hydrotalcite-like compounds10.1021/acs.jpcc.7b09041 ↗
12. Enhanced catalytic properties of Cu-based composites for NOx reduction with coexistence and intergrowth effect10.1016/j.fuel.2018.07.026 ↗
13. CO-free hydrogen production over Au/CeO2–Fe2O3 catalysts: part 1. Impact of the support composition on the performance for the preferential CO oxidation reaction10.1016/j.apcatb.2010.10.016 ↗
14. CO-free hydrogen production over Au/CeO2–Fe2O3 catalysts: part 2. Impact of the support composition on the performance in the water-gas shift reaction10.1016/j.apcatb.2010.11.021 ↗
15. Hollow micro/nanostructured ceria-based materials: synthetic strategies and versatile applications
16. CO and soot oxidation activity of doped ceria: influence of dopants10.1016/j.apcatb.2016.03.042 ↗
17. Control of diesel particulate emission based on Ag/CeOx/FeOy catalysts supported on cordierite10.1016/j.cej.2016.01.043 ↗
18. Comparative study of 3D ordered macroporous Ce0.75Zr0.2M0.05O2−δ (M = Fe, Cu, Mn, Co) for selective catalytic reduction of NO with NH310.1039/C3CY00398A ↗
19. High activity of Au/γ-Fe2O3 for CO oxidation: effect of support crystal phase in catalyst design10.1021/cs5020496 ↗
20. Ceria modified FeMnOx-enhanced performance and sulphur resistance for low-temperature SCR of NOx10.1016/j.apcatb.2017.01.019 ↗
21. Fabrication of spinel-type PdxCo3−xO4 binary active sites on 3D ordered meso-macroporous Ce-Zr-O2 with enhanced activity for catalytic soot oxidation10.1021/acscatal.8b01924 ↗
22. Three-dimensionally ordered macroporous Ce0.8Zr0.2O2-supported gold nanoparticles: synthesis with controllable size and super-catalytic performance for soot oxidation10.1039/c0ee00813c ↗
23. Three dimensionally ordered macroporous Ce1−xZrxO2 solid solutions for diesel soot combustion10.1039/B915027G ↗
24. Fe-doped ceria solids synthesized by the microemulsion method for CO oxidation reactions10.1016/j.apcatb.2011.06.025 ↗
25. Pure and Fe-doped CeO2 nanoparticles obtained by microwave assisted combustion synthesis: physico-chemical properties ruling their catalytic activity towards CO oxidation and soot combustion10.1016/j.apcatb.2017.04.032 ↗
26. Enhancement of catalytic activity over the iron-modified Ce/TiO2 catalyst for selective catalytic reduction of NOx with ammonia10.1021/jp307038q ↗
27. Facile synthesis and unique physicochemical properties of three-dimensionally ordered macroporous magnesium oxide, gamma-alumina, and ceria−zirconia solid solutions with crystalline mesoporous walls10.1021/ic900132k ↗
28. Creation of three-dimensionally ordered macroporous Au/CeO2 catalysts with controlled pore sizes and their enhanced catalytic performance for formaldehyde oxidation10.1016/j.apcatb.2009.05.001 ↗
29. Investigation of catalytic mechanism of formaldehyde oxidation over three-dimensionally ordered macroporous Au/CeO2 catalyst10.1016/j.apcatb.2011.10.036 ↗
30. Three-dimensionally ordered macroporous CeO2-supported Pd@Co nanoparticles: highly active catalysts for methane oxidation10.1016/j.jcat.2016.07.003 ↗
31. Three-dimensionally ordered macroporous Au/CeO2–Co3O4 catalysts with mesoporous walls for enhanced CO preferential oxidation in H2-rich gases10.1016/j.jcat.2012.09.003 ↗
32. Improvement of catalytic performance of preferential oxidation of CO in H2-rich gases on three-dimensionally ordered macro- and meso-porous Pt–Au/CeO2 catalysts10.1016/j.apcatb.2013.06.002 ↗
33. Comparative study on the preparation, characterization and catalytic performances of 3DOM Ce-based materials for the combustion of diesel soot10.1016/j.apcatb.2011.07.029 ↗
34. Three-dimensionally ordered macroporous Au/CeO2-Co3O4 catalysts with nanoporous walls for enhanced catalytic oxidation of formaldehyde10.1016/j.apcatb.2012.08.005 ↗
35. Role and reduction of NOx in the catalytic combustion of soot over iron–ceria mixed oxide catalyst10.1016/j.cej.2012.12.010 ↗
36. Syngas production from methane and air via a redox process using Ce–Fe mixed oxides as oxygen carriers10.1016/j.apcatb.2010.04.018 ↗
37. Direct conversion of methane to synthesis gas using lattice oxygen of CeO2–Fe2O3 complex oxides10.1016/j.cej.2009.04.038 ↗
38. Synthesis of nanoscale Ce1−xFexO2 solid solutions via a low-temperature approach10.1021/ja016502+ ↗
39. Determination of active site densities and mechanisms for soot combustion with O2 on Fe-doped CeO2 mixed oxides10.1016/j.jcat.2010.08.017 ↗
40. Partial oxidation of methane to syngas with air by lattice oxygen transfer over ZrO2-modified Ce–Fe mixed oxides10.1016/j.cej.2011.08.006 ↗
41. Gold supported on metal-doped ceria catalysts (M = Zr, Zn and Fe) for the preferential oxidation of CO (PROX)10.1016/j.jcat.2010.09.027 ↗
42. Correlation of structural characteristics with catalytic performance of CuO/CexZr1−xO2 catalysts for NO reduction by CO10.1016/j.jcat.2010.07.024 ↗
43. NO reduction by CO over copper catalyst supported on mixed CeO2 and Fe2O3: catalyst design and activity test10.1016/j.apcatb.2018.08.054 ↗
44. Oxygen vacancy clusters promoting reducibility and activity of ceria nanorods10.1021/ja808433d ↗
45. Catalytic and redox properties of nano-sized La0.8Sr0.2Mn1−xFexO3−δ mixed oxides synthesized by different routes10.1016/j.molcata.2005.10.016 ↗
46. Promoting effects of In2O3 on Co3O4 for CO oxidation: tuning O2 activation and CO adsorption strength simultaneously10.1021/cs501049r ↗
47. Highly dispersed iron vanadate catalyst supported on TiO2 for the selective catalytic reduction of NOx with NH310.1016/j.jcat.2013.08.003 ↗
48. Reduction of NO by CO over nanoscale LaCo1−xCuxO3 and LaMn1−xCuxO3 perovskites10.1016/j.molcata.2006.05.008 ↗
49. Promotional mechanisms of activity and SO2 tolerance of Co- or Ni-doped MnOx-CeO2 catalysts for SCR of NOx with NH3 at low temperature10.1016/j.cej.2017.02.042 ↗
50. Correlation between the physicochemical properties and catalytic performances of CexSn1−xO2 mixed oxides for NO reduction by CO10.1016/j.apcatb.2013.06.020 ↗
51. NO reduction by CO over CuO–CeO2 catalysts: effect of preparation methods10.1039/c3cy20805b ↗
52. Effect of precursors on the structure and activity of CuO-CoOx/γ-Al2O3 catalysts for NO reduction by CO10.1016/j.jcis.2017.09.031 ↗
53. Investigation of the physicochemical properties of CuO/Sm2O3/γ-Al2O3 catalysts and their activity for NO removal by CO10.1016/j.molcata.2016.03.038 ↗
54. Crystal-plane effects on surface and catalytic properties of Cu2O nanocrystals for NO reduction by CO10.1016/j.apcata.2015.08.021 ↗