Flower-like molybdenum disulfide/carbon nanotubes composites for high sulfur utilization and high-performance lithium–sulfur battery cathodes
Source abstract
Abstract
Abstract Lithium–sulfur (Li–S) batteries have attracted an increasing attention for advanced energy storage devices, because of their high energy density, low cost and lower environmental impacts. However, their commercial applications are still hampered with the low conductivity and sulfur utilization, the low sulfur loading and the serious capacity fading at a high current rate. Herein, we prepared flower-like molybdenum disulfide and carbon nanotubes (MoS2/CNTs) composites with mesoporous structures for high sulfur utilization cathodes. The flower-like MoS2 can immobilize sulfur and obstruct the solubility of polysulfide within the structures. The MoS2/CNTs-S cathode with 2.6 mg cm−2 sulfur loading and capacity per area of 3.83 mA h cm−2 delivers an initial specific discharge capacity of 1473 mA h g−1 with 88.0% sulfur utilization and maintains a reversible capacity of 855.5 mA h g−1 with coulombic efficiency up to 96.6% after 50 cycles at the current rate of 0.2 C (335.0 mA g−1). Impressively, the MoS2/CNTs-S cathode at 5 C shows the high specific capacity of 1254 mA h g−1 with 76.0% sulfur utilization and maintains 384.0 mA h g−1 with an average coulombic efficiency of 91% after 200 cycles. The MoS2/CNTs-S cathode could be a good candidate for high-performance Li–S battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · MXene and MAX Phase Materials · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Three-dimensional carbon current collector promises small sulfur molecule cathode with high areal loading for lithium-sulfur batteries10.1021/acsami.8b00225 ↗
2. Prussian blue: a potential material to improve the electrochemical performance of lithium-sulfur batteries10.1021/acsami.6b06890 ↗
3. Advanced batteries based on manganese dioxide and its composites10.1016/j.ensm.2018.02.010 ↗
4. MnS decorated N/S codoped 3D graphene which used as cathode of the lithium-sulfur battery10.1016/j.apsusc.2017.10.050 ↗
5. Thin-layered molybdenum disulfide nanoparticles as an effective polysulfide mediator in lithium-sulfur batteries10.1021/acsami.8b05397 ↗
6. A new direction for the performance improvement of rechargeable lithium/sulfur batteries10.1016/j.jpowsour.2011.10.076 ↗
7. The regulating role of carbon nanotubes and graphene in lithium-ion and lithium-sulfur batteries
8. Inhibiting polysulfides diffusion of lithium-sulfur batteries using an acetylene black-CoS2 modified separator: mechanism research and performance improvement10.1016/j.apsusc.2017.08.062 ↗
9. Rational design of MXene/1T-2H MoS2-C nanohybrids for high-performance lithium-sulfur batteries
10. Soft approach hydrothermal synthesis of a 3D sulfur/graphene/multiwalled carbon nanotube cathode for lithium–sulfur batteries10.1039/C6RA18226G ↗
11. Sulfur-embedded porous carbon nanofiber composites for high stability lithium-sulfur batteries10.1016/j.cej.2017.09.134 ↗
12. Facile synthesis of ultrahigh-surface-area hollow carbon nanospheres for enhanced adsorption and energy storage10.1038/ncomms8221 ↗
13. Lightweight reduced graphene oxide@MoS2 interlayer as polysulfide barrier for high-performance lithium-sulfur batteries10.1021/acsami.7b18645 ↗
14. Nitrogen-doped graphene-supported mixed transition-metal oxide porous particles to confine polysulfides for lithium-sulfur batteries10.1002/aenm.201800595 ↗
15. Improved performance of dual-conducting polymer-coated sulfur composite with high sulfur utilization for lithium-sulfur batteries10.1016/j.jallcom.2018.01.364 ↗
16. Nitrogen-doped holey carbon nanotubes: dual polysulfides trapping effect towards enhanced lithium-sulfur battery performance10.1016/j.apsusc.2018.05.166 ↗
17. Biomimetic bipolar microcapsules derived from staphylococcus aureus for enhanced properties of lithium-sulfur battery cathodes10.1002/aenm.201702373 ↗
18. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts10.1021/acs.nanolett.5b04166 ↗
19. NiS2 @CoS2 nanocrystals encapsulated in N-doped carbon nanocubes for high performance lithium/sodium ion batteries10.1016/j.ensm.2017.06.001 ↗
20. Interaction of TiS2 and sulfur in Li-S battery system10.1149/2.1631706jes ↗
21. Rational design of a multidimensional N-doped porous carbon/MoS2/CNT nano-architecture hybrid for high performance lithium–sulfur batteries10.1039/C8TA04675A ↗
22. Flower-like MoS2 modified reduced graphene oxide nanocomposite: synthesis and application for lithium-ion batteries and mediator-free biosensor10.1149/2.0111512jes ↗
23. Porous-shell vanadium nitride nanobubbles with ultrahigh areal sulfur loading for high-capacity and long-life lithium-sulfur batteries10.1021/acs.nanolett.7b04084 ↗
24. Facile synthesis of sulfur-polypyrrole as cathodes for lithium-sulfur batteries10.1002/celc.201600479 ↗
25. PVP-assisted synthesis of MoS2 nanosheets with improved lithium storage properties10.1039/c3ce40392k ↗
26. From bulk to monolayer MoS2: evolution of Raman scattering
27. Ultra-microporous carbons encapsulate small sulfur molecules for high performance lithium-sulfur battery10.1016/j.nanoen.2017.01.060 ↗
28. Hierarchical porous carbon modified with ionic surfactants as efficient sulfur hosts for the high-performance lithium-sulfur batteries10.1016/j.cej.2016.12.081 ↗
29. Hierarchical 3D nitrogen and phosphorous codoped graphene/carbon nanotubes–sulfur composite with synergistic effect for high performance of lithium–sulfur batteries10.1007/s10853-017-1678-1 ↗
30. Ultrasmall Fe2O3 nanoparticles/MoS2 nanosheets composite as high-performance anode material for lithium ion batteries10.1038/srep42772 ↗
31. A nitrogen and sulfur dual-doped carbon derived from polyrhodanine@cellulose for advanced lithium-sulfur batteries10.1002/adma.201502467 ↗
32. Flower-like MoS2 supported on three dimensional graphene aerogels as high-performance anode materials for sodium-ion batteries10.1007/s11581-018-2528-0 ↗
33. Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium-sulfur batteries10.1002/anie.201410174 ↗
34. Biomass waste-derived honeycomb-like nitrogen and oxygen dual-doped porous carbon for high performance lithium-sulfur batteries10.1016/j.electacta.2016.01.192 ↗
35. N-doped yolk-shell hollow carbon sphere wrapped with graphene as sulfur host for high-performance lithium-sulfur batteries10.1016/j.apsusc.2017.06.288 ↗
36. Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium-sulfur batteries10.1038/ncomms10601 ↗
37. A three-dimensional cathode matrix with bi-confinement effect of polysulfide for lithium-sulfur battery10.1016/j.apsusc.2017.09.013 ↗
38. Multiwalled carbon nanotubes-sulfur composites with enhanced electrochemical performance for lithium/sulfur batteries10.1016/j.apsusc.2014.04.036 ↗
39. Electrochemical properties of the soluble reduction products in rechargeable Li/S battery10.1016/j.jpowsour.2009.11.004 ↗
40. Toward more reliable lithium-sulfur batteries: an all-graphene cathode structure10.1021/acsnano.6b04019 ↗
41. Supernormal conversion anode consisting of high-density MoS2 bubbles wrapped in thin carbon network by self-sulfuration of polyoxometalate complex10.1021/acsnano.7b03665 ↗
42. MoS2 -decorated coaxial nanocable carbon aerogel composites as cathode materials for high performance lithium-sulfur batteries10.1016/j.jallcom.2016.09.004 ↗
43. Dual core-shell-structured S@C@MnO2 nanocomposite for highly stable lithium-sulfur batteries10.1021/acsami.7b07996 ↗
44. PEO-Linked MoS2–graphene nanocomposites with 2D polar–nonpolar amphoteric surfaces as sulfur hosts for high-performance Li–S batteries10.1021/acssuschemeng.7b03306 ↗
45. A comprehensive approach toward stable lithium-sulfur batteries with high volumetric energy density10.1002/aenm.201601630 ↗