Exploration on the tribological mechanisms of polyimide with different molecular structures in different temperatures
Source abstract
Abstract
Abstract In order to explore the friction and wear mechanisms of polyimide with metal, this work addressed the tribological properties of the polyimide with different molecular structures in a wide temperature range. It was found that the incorporation of fluorine and sulfur atoms into polyimide had a significant effect on their mechanical and tribological properties. Generally, the wear rates of FPI and SPI are much higher than PI, and FPI displays the worst friction coefficient. To deeper reveal the fundamental reasons, the FTIR, XPS, EDS, SEM characterizations were carried out combined with molecular dynamic simulation. The calculation results from the Molecular Dynamics model between PI and Fe showed that the interaction potential energy of SPI and FPI was larger than that of PI due to the polarization of F and S. Judged from the structures of transfer film, SPI and FPI was easily adhered on the surface of counterpart, even chemical reaction. The XPS analysis further confirmed the possibility of tribo-chemical reactions between SPI/FPI and Fe. This study will provide the theoretical guidance for other polymer molecular design and its tribological research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Friction and wear of materials
2. Structural superlubricity and ultralow friction across the length scales10.1038/s41586-018-0704-z ↗
3. Tribological properties of polymers PI, PTFE and PEEK at cryogenic temperature in vacuum10.1016/j.cryogenics.2016.01.001 ↗
4. Effect of temperature on friction and wear behaviors of polyimide (PI)-based solid-liquid lubricating materials10.1002/pat.3516 ↗
5. Carbon-based tribofilms from lubricating oils10.1038/nature18948 ↗
6. Friction and wear studies using taguchi method on polyphenylene sulfide filled with a complex mixture of MoS2, Al2O3, and other compounds10.1016/j.wear.2004.12.017 ↗
7. Enhanced mechanical properties of a multiwall carbon nanotube attached pre-stitched graphene oxide filled linear low density polyethylene composite10.1039/C3TA14393G ↗
8. Ultralow wear PTFE-based polymer composites-the role of water and tribochemistry10.1021/acs.macromol.9b00316 ↗
9. Ultralow friction and wear of polymer composites under extreme unlubricated sliding conditions10.1002/admi.201601171 ↗
10. Highly stable tribological performance and hydrophobicity of porous polyimide material filled with lubricants in simulated space environment10.1039/C5RA23240F ↗
11. Tribology performances of molybdenum disulfide reinforced thermoplastic polyimide under dry and water lubrication conditions10.1108/00368790610670782 ↗
12. Effect of chemical modification of graphene on mechanical, electrical, and thermal properties of polyimide/graphene nanocomposites10.1021/am300999g ↗
13. Modified graphene/polyimide nanocomposites: reinforcing and tribological effects10.1021/am400635x ↗
14. Preparation and tribological properties of polyimide/carboxyl-functionalized multi-walled carbon nanotube nanocomposite films under seawater lubrication10.1007/s11249-015-0476-7 ↗
15. Growth of ultra-dense MoS2 nanosheets on carbon fibers to improve the mechanical and tribological properties of polyimide composites
16. Enhancing tribological, mechanical, and thermal properties of polyimide composites by the synergistic effect between graphene and ionic liquid
17. Effect of isomerism on mechanical and tribological properties of thermoplastic polyimide films10.1016/j.triboint.2018.01.060 ↗
18. Effect of molecular weight on tribological properties of thermosetting polyimide under high temperature10.1016/j.triboint.2014.04.031 ↗
19. Friction and wear mechanisms of sintered and thermoplastic polyimides under adhesive sliding10.1002/mame.200600400 ↗
20. In situ polymerization and performance of alicyclic polyimide/graphene oxide nanocomposites derived from 6FAPB and CBDA10.1016/j.apsusc.2016.10.062 ↗
21. Antagonistic effects in structural design of sulfur-based polyimides as shielding layers for solar cells10.1016/j.solmat.2019.01.018 ↗
22. Significant improvement on tribological performance of polyimide composites by tuning the tribofilm nanostructures10.1016/j.jmatprotec.2020.116602 ↗
23. Switching brake materials to extremely wear-resistant self-lubrication materials via tuning interface nanostructures10.1021/acsami.8b02166 ↗
24. Engineering a hyperbranched polyimide membrane for shape memory and CO2 capture10.1039/C7TA02842C ↗
25. Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology10.1039/C8TC00452H ↗
26. Tribological behavior of fluorinated and nonfluorinated polyimide films10.1080/00222348.2012.657590 ↗
27. Preparation and tribological properties of polyimide/carbon sphere microcomposite films under seawater condition10.1016/j.triboint.2015.04.027 ↗
28. Structural characterization and properties of organo-soluble polyimides, bismaleimide and polyaspartimides based on 4,4'-dichloro-3,3'-diamino benzophenone
29. Effects of different amine-functionalized graphene on the mechanical, thermal, and tribological properties of polyimide nanocomposites synthesized by in situ polymerization10.1016/j.polymer.2018.02.017 ↗
30. High temperature tribological properties of thermosetting polyimide
31. Tribological properties of epoxy lubricating composite coatings reinforced with core-shell structure of CNF/MoS2 hybrid10.1016/j.compositesa.2019.04.009 ↗
32. Formation and function mechanisms of nanostructured tribofilms of epoxy-based hybrid nanocomposites10.1016/j.wear.2015.08.025 ↗
33. Evolution and wear of fluoropolymer transfer films
34. Distinct tribological behaviors of polyimide composites when rubbing against various metals10.1016/j.triboint.2020.106254 ↗
35. Structure and function of transfer film formed from PTFE/PEEK polymer blend10.1021/acs.jpcc.7b02860 ↗
36. A molecular dynamics study on water lubrication of PTFE sliding against copper10.1016/j.triboint.2019.03.070 ↗
37. Tribological performance of graphene and PTFE solid lubricants for polymer coatings at elevated temperatures10.1007/s11249-019-1212-5 ↗
38. Comparative study of tribochemistry of ultrahigh molecular weight polyethylene, polyphenylene sulfide and polyetherimide in tribo-composites10.1016/j.jcis.2017.12.078 ↗
39. Tribological behaviors of fluorinated polyimides at different temperatures10.1080/00222348.2010.497023 ↗
40. Ellison · 1995
41. Comparative study of tribological properties of carbon fibers and aramid particles reinforced polyimide composites under dry and sea water lubricated conditions
42. Attaining high tribo-performance of PAEK composites by selecting right combination of solid lubricants in right proportions10.1016/j.compscitech.2017.03.011 ↗
43. Tribological performance of PPS composites under diesel lubrication conditions10.1016/j.triboint.2017.05.040 ↗
44. One-pot synthesis of reduced graphene oxide/molybdenum disulfide heterostructures with intrinsic incommensurateness for enhanced lubricating properties10.1016/j.carbon.2016.12.089 ↗
45. X-ray photoelectron spectra of metal complexes of substituted 2, 4-pentanediones10.1016/S0277-5387(00)87000-X ↗
46. Ultralow wear PTFE and alumina composites: it is all about tribochemistry10.1007/s11249-014-0445-6 ↗
47. Friction and wear behavior of PTFE coatings modified with poly (methyl methacrylate)10.1016/j.compositesb.2019.04.047 ↗
48. Comparative study on tribological mechanisms of polyimide composites when sliding against medium carbon steel and NiCrBSi10.1016/j.jcis.2017.07.070 ↗