Facile and green preparation of novel adsorption materials by combining sol-gel with ion imprinting technology for selective removal of Cu(II) ions from aqueous solution
Source abstract
Abstract
Abstract A novel green adsorption polymer was prepared by ion imprinted technology in conjunction with sol-gel process under mild conditions for the selective removal of Cu(II) ions from aqueous solution. Effects of preparation conditions on adsorption performance of prepared polymers were studied. The ion-imprinted polymer was prepared using Cu(II) ion as template, N-[3-(2-aminoethylamino) propyl] trimethoxysilane (AAPTMS) as functional monomer and tetraethyl orthosilicate (TEOS) as cross-linker. Water was used as solvent in the whole preparation process. The imprinted and non-imprinted polymers were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscope (AFM), Brunauer, Emmett and Teller (BET) and zeta potential. Three-dimensional network structure was formed and functional monomer was successfully cross-linked into the network structure of polymers. Effects of adsorption conditions on adsorption performance of prepared polymers were studied too. The pH value is of great influence on adsorption behavior. Adsorption by ion-imprinted polymer was fast (adsorption equilibrium was reached within 60 min). The adsorption capacity of Cu(II) ion-imprinted polymer was always larger than that of non-imprinted polymer. Pseudo-second-order kinetics model and Freundlich isotherm model fitted well with adsorption data. The maximum adsorption capacity of Cu(II) ion-imprinted polymer was 39.82 mg·g−1. However, the preparation conditions used in this work are much milder than those reported in literatures. The Cu(II) ion-imprinted polymer showed high selectivity and relative selectivity coefficients for Pb(II), Ni(II), Cd(II) and Co(II). In addition, the prepared ion-imprinted polymer could be reused several times without significant loss of adsorption capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical chemistry methods development · Adsorption and biosorption for pollutant removal · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Heavy metal adsorption onto agro-based waste materials: A review10.1016/j.jhazmat.2008.01.024 ↗
2. Removal of iron ions from industrial copper raffinate and electrowinning electrolyte solutions by chemical precipitation and ion exchange10.1016/j.mineng.2017.07.018 ↗
3. An electrochemically-switched BPEI-CQD/PPy/PSS membrane for selective separation of dilute copper ions from wastewater10.1016/j.cej.2017.06.177 ↗
4. Simultaneous determination of cadmium, lead and mercury ions at trace level by magnetic solid phase extraction with Fe@Ag@Dimercaptobenzene coupled to high performance liquid chromatography10.1016/j.talanta.2017.07.043 ↗
5. Fe3O4@SiO2@CS-TETA functionalized graphene oxide for the adsorption of methylene blue (MB) and Cu(II)10.1016/j.apsusc.2017.05.179 ↗
6. Removal of copper and cobalt ions by fly ash-based geopolymer from solutions-equilibrium study
7. Kinetic, thermodynamic and equilibrium studies on the removal of copper ions from aqueous solutions by natural and modified clinoptilolites10.1007/s11814-015-0299-0 ↗
8. Removal of zinc, copper and lead by natural zeolite-a comparison of adsorption isotherms10.1016/j.watres.2003.12.035 ↗
9. Adsorption of copper on amine-functionalized SBA-15 prepared by co-condensation: Equilibrium properties10.1016/j.cej.2010.11.016 ↗
10. Preparation of chitosan- graft −polyacrylamide magnetic composite microspheres for enhanced selective removal of mercury ions from water10.1016/j.jcis.2015.05.043 ↗
11. The removal of heavy metal from aqueous solutions by sawdust adsorption −removal of copper10.1016/S0304-3894(00)00278-8 ↗
12. Study of the adsorption and electroadsorption process of Cu (II) ions within thermally and chemically modified activated carbon10.1016/j.jhazmat.2016.11.036 ↗
13. Novel functionalized silica gel for on-line preconcentration of cadmium(II) copper(II), and cobalt(II) with determination by flame atomic absorption spectrometry10.1080/00032719.2015.1067812 ↗
14. Molecular imprinting: perspectives and applications10.1039/C6CS00061D ↗
15. Synthesis characterization and application of ion imprinted polymeric nanobeads for highly selective preconcentration and spectrophotometric determination of Ni2+, ion in water samples10.1016/j.saa.2015.08.010 ↗
16. Production of metal ion imprinted polymer from mercapto?silica through sol-gel process as selective adsorbent of cadmium10.1016/j.desal.2009.09.139 ↗
17. Molecularly imprinted porous beads for the selective removal of copper ions10.1002/jssc.201500984 ↗
18. Preparation and adsorption characteristics of an ion-imprinted polymer for fast removal of Ni(II) ions from aqueous solution10.1016/j.jhazmat.2017.06.010 ↗
19. Preparation and adsorption characteristics of an imprinted polymer for selective removal of Cr(VI) ions from aqueous solutions10.1039/C4TA03024A ↗
20. Synthesis of thiol functionalized organo-ceramic adsorbent by sol-gel technology10.1016/S1381-5148(01)00071-2 ↗
21. Syntheses of polyamine-bridged polysilsesquioxanes hybrid materials combining sol-gel processing and molecular imprinting applied to selective adsorption for copper10.1016/j.matchemphys.2015.01.018 ↗
22. Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol–gel process for selective removal of cadmium(II) from aqueous solution10.1016/j.cej.2011.05.023 ↗
23. Uptake and desorption of copper ion using functionalized polymer coated silica gel in aqueous environment10.1016/j.seppur.2007.03.003 ↗
24. Selective recognition of molybdenum(VI) from water by Mo(VI) oxy ion-imprinted particle as an adsorbent10.1016/j.cej.2013.01.018 ↗
25. Preparation of zirconium oxy ion-imprinted particle for the selective separation of trace zirconium ion from water10.1016/j.jcis.2014.05.063 ↗
26. Synthesis of hybrid adsorbents combining sol-gel processing and molecular imprinting applied to lead removal from aqueous streams10.1021/cm801480v ↗
27. An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II)10.1021/ac048570v ↗
28. Hierarchically imprinted organic?inorganic hybrid sorbent for selective separation of mercury ion from aqueous solution10.1016/j.aca.2006.09.034 ↗
29. Synthesis of nano-sized cyanide ion-imprinted polymer via non-covalent approach and its use for the fabrication of a CN(−)-selective carbon nanotube impregnated carbon paste electrode10.1016/j.talanta.2015.09.043 ↗
30. Selective Copper(II) Sorption Behavior of Surface-Imprinted Core-Shell-Type Polymethacrylate Microspheres10.1021/ie801321d ↗
31. Enhanced selective removal of Cu(II) from aqueous solution by novel polyethylenimine-functionalized ion imprinted hydrogel: Behaviors and mechanisms10.1016/j.jhazmat.2015.06.043 ↗
32. Amino modification of biochar for enhanced adsorption of copper ions from synthetic wastewater10.1016/j.watres.2013.09.050 ↗
33. Biosorption of hexavalent chromium by raw and acid-treated green alga Oedogonium hatei from aqueous solutions10.1016/j.jhazmat.2008.06.104 ↗
34. Study of the Sorption of Divalent Metal Ions on to Peat10.1260/0263617001493693 ↗
35. Development of a Novel Hollow Fiber Cation-Exchange Membrane from Bromomethylated Poly(2,6-dimethyl-1,4-phenylene oxide) for Removal of Heavy-Metal Ions, Ind10.1021/ie901408c ↗
36. Equilibrium and kinetic modelling of cadmium(II) biosorption by nonliving algal biomass Oedogonium, sp. from aqueous phase10.1016/j.jhazmat.2007.09.021 ↗
37. Adsorption of divalent heavy metal ions from water using carbon nanotube sheets10.1016/j.jhazmat.2010.09.008 ↗
38. Synthesis of a novel nanostructured ion-imprinted polymer for very fast and highly selective recognition of copper(II) ions in aqueous media10.1016/j.reactfunctpolym.2010.11.002 ↗
39. Carbon disulfide-modified magnetic ion-imprinted chitosan-Fe(III): A novel adsorbent for simultaneous removal of tetracycline and cadmium10.1016/j.carbpol.2016.08.038 ↗
40. Tailor-made ion-imprinted polymer based on functionalized graphene oxide for the preconcentration and determination of trace copper in food samples10.1002/jssc.201501145 ↗
41. Batch and column separation characteristics of copper-imprinted porous polymer micro-beads synthesized by a direct imprinting method10.1016/j.jhazmat.2009.08.107 ↗
42. A nanostructure ion-imprinted polymer for the selective separation and determination of copper ions in aqueous solutions10.1080/19443994.2015.1110724 ↗
43. Preparation of a core-shell magnetic ion-imprinted polymer via a sol-gel process for selective extraction of Cu(II) from herbal medicines10.1039/C3AN02096G ↗