journal article·2020-11

First-principles molecular dynamics investigation of ceria/silica sliding interface toward functional materials design for chemical mechanical polishing process

Tasuku Onodera, Hitomi Takahashi, Satoyuki Nomura

Publisher page

Abstract

Abstract We report a form of chemical mechanical polishing (CMP) in which ceria abrasive particles polish a silicon wafer surface in a water environment. The Car-Parrinello molecular dynamics (CPMD) method, which enables chemical reaction dynamics in non-equilibrium systems to be treated non-empirically, was used. The first application of CPMD was to a model including a silica surface rubbed by a ceria cluster to ascertain the fundamental tribochemical phenomena in the CMP process. The model consisted of a hydrogen-terminated silica surface (a representative model of an oxidized wafer surface) and H4Ce6O12 cluster placed in the vicinity of an asperity in the silica surface. H2O molecules were explicitly considered in order to reflect the presence of slurry water. An external load and shear force were applied to the cluster. Under conditions of finite temperature and friction, a Ce-O-Si bridging bond formed at the interface between the silica surface and the ceria cluster. Subsequently, another Ce-O-Si bridging bond formed. These newly formed bridging bonds changed the silicon atom into a five-coordinated one. Because this state was probably unstable, a pyramid structure was rapidly restored by breaking the original Si-O bond in the asperity, meaning that the wafer surface became flattened. By referring to static density functional theory (DFT) calculations, we concluded that this bond dissociation event was due to multiple Ce-O-Si bonds forming. To discuss the effect of slurry water, a similar CPMD simulation, but without H2O molecules (i.e., dry friction), was performed. Here, the Si-O bond dissociation reaction did not take place even if multiple Ce-O-Si bonds formed. This means slurry water is needed for CMP to occur and it probably helps to weaken the Si-O bond. The second application of CPMD was to a model consisting of a thin water layer sandwiched between silica and ceria plates for studying the effect of the surface orientation of the ceria. Two low-index CeO2 surfaces, (1 0 0) and (1 1 1), were modeled. A chemical event wherein Ce-O-Si bridging bonds formed on the ceria/silica interface could be observed in both models. However, the bond dissociation reaction of the original Si-O bond on the silica surface proceeded only in the model with the (1 1 1) surface, and not on the (1 0 0) surface. This difference in reactivity could mainly be explained by the arrangement of atoms of each surface. The (1 1 1) surface provides hexagonal adsorption sites that inherently form a structure with five-coordinated silicon atoms, which are important intermediates in the CMP process. On the other hand, the (1 0 0) surface exhibits square adsorption sites which hardly form the required intermediate. We successfully examined the effect of the surface orientation of the ceria in addition to the fundamental CMP mechanism wherein multiple Ce-O-Si bonds initiate a chemical reaction including Si-O bond scission.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Mechano-chemical polishing of silicon wafers10.1016/S0924-0136(03)00827-6 ↗
2. Finite element modeling for chemical mechanical polishing process under different back pressures10.1016/S0924-0136(03)00767-2 ↗
3. Polishing mechanism of tantalum films by SiO2 particles10.1016/S0167-9317(03)00398-8 ↗
4. Molecular mechanisms for the functionality of lubricant additives10.1126/science.1107895 ↗
5. A computational chemistry study on friction of h-MoS2. Part I. Mechanism of single sheet lubrication10.1021/jp9069866 ↗
6. Anisotropic mechanical amorphization drives wear in diamond10.1038/nmat2902 ↗
7. Fate of methanol molecule sandwiched between hydrogen-terminated diamond-like carbon films by tribochemical reactions: tight-binding quantum chemical molecular dynamics study10.1039/c2fd00125j ↗
8. Mixed lubrication with C18 fatty acids: effect of unsaturation10.1007/s11249-013-0270-3 ↗
9. Tribocatalytic reaction of polytetrafluoroethylene sliding on an aluminum surface10.1021/acs.jpcc.5b01370 ↗
10. Tribochemical degradation of polytetrafluoroethylene catalyzed by copper and aluminum surfaces10.1021/acs.jpcc.6b00799 ↗
11. Role of oxygen functional groups in the friction of water-lubricated low-index diamond surfaces
12. Shear melting of silicon and diamond and the disappearance of the polyamorphic transition under shear10.1103/PhysRevMaterials.2.083601 ↗
13. Superlubricity of glycerol by selfsustained chemical polishing10.1038/s41598-019-42730-9 ↗
14. Simulation of chemical mechanical planarization of copper with molecular dynamics10.1063/1.1505113 ↗
15. Quantum chemical molecular dynamics studies on the chemical mechanical polishing process of Cu surface10.1143/JJAP.42.1897 ↗
16. Benzotriazole adsorption on Cu2O(111) surfaces: a first-principles study10.1021/jp049457b ↗
17. Tight-binding quantum chemical molecular dynamics simulation of mechano-chemical reactions during chemical-mechanical polishing process of SiO2 surface by CeO2 particle10.1016/j.apsusc.2004.09.126 ↗
18. Investigation of material removal mechanism of silicon wafer in the chemical mechanical polishing process using molecular dynamics simulation method10.1007/s00339-009-5097-2 ↗
19. Monoatomic layer removal mechanism in chemical mechanical polishing process: a molecular dynamics study10.1063/1.3327448 ↗
20. Study of material removal processes of the crystal silicon substrate covered by an oxide film under a silica cluster impact: molecular dynamics simulation10.1016/j.apsusc.2014.03.143 ↗
21. Atomistic mechanisms of chemical mechanical polishing of a Cu surface in aqueous H2O2: tight-binding quantum chemical molecular dynamics simulations10.1021/acsami.5b11910 ↗
22. Atomistic Mechanisms of Si chemical mechanical polishing in aqueous H2O2: ReaxFF reactive molecular dynamics simulations10.1016/j.commatsci.2017.02.005 ↗
23. Energy dissipation via quantum chemical hysteresis during high-pressure compression: a first-principles molecular dynamics study of phosphates10.1103/PhysRevB.72.054124 ↗
24. A fundamental mechanism for carbon-film lubricity identified by means of ab initio molecular dynamics10.1016/j.carbon.2016.02.078 ↗
25. Contrasting roles of water at sliding interfaces between silicon-based materials: first-principles molecular dynamics sliding simulations10.1021/acs.jpcc.8b01953 ↗
26. Quantum Espresso: a modular and opensource software project for quantum simulations of materials
27. Advanced capabilities for materials modelling with Quantum Espresso
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Errata: generalized gradient approximation made simple10.1103/PhysRevLett.78.1396 ↗
30. Optimized pseudopotentials10.1103/PhysRevB.41.1227 ↗
31. Computer “Experiments” on classical fluids. I. Thermodynamical properties of lennard-jones molecules10.1103/PhysRev.159.98 ↗
32. Modeling the surface structure and stability of α-quartz10.1021/jp983239z ↗
33. Reconstruction of pristine and hydrolyzed quartz surfaces10.1021/jp0402075 ↗
34. Water adsorption on hydroxylated α-Quartz (0001) surfaces: from monomer to flat bilayer
35. Lammps molecular dynamics simulator, http://lammps.sandia.gov.
36. Dehydroxylation and silanization of the surfaces of â-cristobalite silica: an ab initio simulation10.1021/jp010800b ↗
37. Hydrolysis of a two-membered silica ring on the amorphous silica surface10.1063/1.1630026 ↗
38. Role of different additives on silicon dioxide film removal rate during chemical mechanical polishing using ceria-based dispersions10.1149/1.3457387 ↗
39. Cerium oxide as a mute to acid free polishing
40. Reverse selectivity - high silicon nitride and low silicon dioxide removal rates using ceria abrasive-based dispersions10.1016/j.jcis.2010.03.071 ↗
41. Shallow trench isolation chemical mechanical planarization: a review10.1149/2.0071511jss ↗
42. Theoretical insights into the hydrophobicity of low index CeO2 surfaces10.1016/j.apsusc.2019.01.208 ↗