journal article·2018-04

Superhydrophobic coatings on wood substrate for self-cleaning and EMI shielding

Yingjie Xing, Yaping Xue, Jinlong Song, Yankui Sun, Liu Huang, Xin Liu, Jing Sun

Publisher page

Abstract

Abstract A layer of superhydrophobic coating having good electromagnetic shielding and self-cleaning performance was fabricated on a wood surface through an electroless copper plated process. The superhydrophobic property of the wood surface was measured by contact angle (CA) and roll-off angle (RA) measurements. The microstructure and chemical composition of the superhydrophobic coating were analyzed by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). The analysis revealed that the microscale particles were uniformly distributed on the wood surface and the main component of the coating is metallic copper. The as-prepared Cu coatings on wood substrate exhibit a good superhydrophobicity with water contact angle about 160° and rolling angle less than 5°.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Aerosol Filtration and Electrostatic Precipitation · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Graphene oxide/cellulose aerogels nanocomposite: preparation, pyrolysis, and application for electromagnetic interference shielding10.1016/j.carbpol.2016.05.051 ↗
2. Reflection and absorption contributions to the electromagnetic interference shielding of single-walled carbon nanotube/polyurethane composites10.1016/j.carbon.2006.11.020 ↗
3. Zinc oxide-graphene based composite layers for electromagnetic interference shielding in the GHz frequency range
4. Aniline tetramer-graphene oxide composites for high performance supercapacitors10.1002/aenm.201400781 ↗
5. Broadband electromagnetic shielding and dielectric properties of polyaniline-stannous oxide composites10.1007/s10854-013-1080-y ↗
6. Design and synthesis of superhydrophobic carbon nanofiber composite coatings for terahertz frequency shielding and attenuation10.1063/1.3583523 ↗
7. Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding10.1021/am303289m ↗
8. Superhydrophobic and conductive carbon nanofiber/PTFE composite coatings for EMI shielding10.1016/j.jcis.2010.09.017 ↗
9. Using a non-covalent modification to prepare a high electromagnetic interference shielding performance graphene nanosheet/water-borne polyurethane composite10.1016/j.carbon.2013.03.056 ↗
10. A new process for preparing conducting wood veneers by electroless nickel plating10.1016/j.surfcoat.2009.10.032 ↗
11. Synthesis of porous iron oxide ceramics using Greek wooden templates and mill scale waste for EMI applications10.1016/j.ceramint.2011.07.064 ↗
12. A single step route to superhydrophobic surfaces through aerosol assisted deposition of rough polymer surfaces: duplicating the lotus effect10.1039/B820102C ↗
13. Directional self-cleaning superoleophobic surface10.1021/la301894e ↗
14. Self-cleaning coatings10.1039/b412803f ↗
15. Anti-icing performance of superhydrophobic surfaces10.1016/j.apsusc.2011.02.057 ↗
16. How wetting hysteresis influences ice adhesion strength on superhydrophobic surfaces10.1021/la901439c ↗
17. Icephobic/anti-icing properties of micro/nanostructured surfaces10.1002/adma.201104412 ↗
18. Understanding the effect of superhydrophobic coatings on energy reduction in anti-icing systems10.1016/j.coldregions.2011.02.006 ↗
19. Water droplet behavior on superhydrophobic SiO 2 nanocomposite films during icing/deicing cycles10.1016/j.matchar.2013.04.017 ↗
20. Barrel-Shaped Oil Skimmer Designed for Collection of Oil from Spills10.1002/admi.201500350 ↗
21. Methodology for robust superhydrophobic fabrics and sponges from in situ growth of transition metal/metal oxide nanocrystals with thiol modification and their applications in oil/water separation10.1021/am303176a ↗
22. Porous ceramic membrane with superhydrophobic and superoleophilic surface for reclaiming oil from oily water10.1016/j.apsusc.2011.10.005 ↗
23. Superhydrophobic polymer-coated copper-mesh; membranes for highly efficient oil–water separation10.1039/c3ta10636e ↗
24. Eccentricity effects of microhole arrays on drag reduction efficiency of microchannels with a hydrophobic wall10.1063/1.4767539 ↗
25. Preparation of super-hydrophobic nano-silica aqueous dispersion and study of its application for water resistance reduction at low-permeability reservoir
26. Directing the transportation of a water droplet on a patterned superhydrophobic surface10.1063/1.3039874 ↗
27. Directional oil sliding surfaces with hierarchical anisotropic groove microstructures10.1002/adma.201302083 ↗
28. Superhydrophobic tracks for low-friction, guided transport of water droplets10.1002/adma.201100461 ↗
29. Biomimic from the superhydrophobic plant leaves in nature: binary structure and unitary structure10.1016/j.plantsci.2007.03.005 ↗
30. Purity of the sacred lotus, or escape from contamination in biological surfaces10.1007/s004250050096 ↗
31. Fabrication and anti-frosting performance of super hydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate10.1016/j.apsusc.2007.04.006 ↗
32. Biophysics: water-repellent legs of water striders10.1038/432036a ↗
33. Electrodeposition of superhydrophobic Cu film on active substrate from deep eutectic solvent10.1149/2.0171508jes ↗
34. Super-hydrophobic surface on pure magnesium substrate by wet chemical method10.1016/j.apsusc.2010.01.037 ↗
35. Superhydrophobic silicon surfaces with micro-nano hierarchical structures via deep reactive ion etching and galvanic etching10.1016/j.jcis.2011.07.030 ↗
36. Fabrication of superhydrophobic surfaces on aluminum10.1016/j.apsusc.2008.03.004 ↗
37. Preparation and characterization of slice-like Cu 2 (OH) 3 NO 3 superhydrophobic structure on copper foil10.1016/j.apsusc.2008.05.317 ↗
38. Fabrication of superhydrophobic surfaces on zinc substrates10.1016/j.apsusc.2010.12.059 ↗
39. Durable icephobic coating for stainless steel10.1021/am3031272 ↗
40. Thermal stability of the structural features in the superhydrophobic boehmite films on austenitic stainless steels10.1016/j.apsusc.2008.02.053 ↗
41. Surface modification of paper and cellulose by plasma-assisted deposition of fluorocarbon films10.1016/j.surfcoat.2004.10.013 ↗
42. Superhydrophobic antibacterial cotton textiles10.1016/j.jcis.2010.07.049 ↗
43. Fabrication of a superhydrophobic surface on a wood substrate10.1016/j.apsusc.2011.05.089 ↗
44. Fabrication of superhydrophobic wood surfaces via a solution-immersion process10.1016/j.apsusc.2011.08.077 ↗
45. Preparation of wood-like structured copper with superhydrophobic properties10.1038/srep18328 ↗
46. Creation of superhydrophobic wood surfaces by plasma etching and thin-film deposition10.1016/j.surfcoat.2015.09.052 ↗
47. Study of the influence of alcohol solvents on extraction of pine lignin
48. Effects of technological parameters on nickel deposition rate on wood by electroless plating method
49. Nickel electroless plating on wood in chemical method
50. Rapid synthesis of inherently robust and stable superhydrophobic carbon soot coatings10.1016/j.apsusc.2016.02.089 ↗
51. Standard Test Methods for Measuring Adhesion by Tape Test, Astm.
52. Creating robust superamphiphobic coatings for both hard and soft materials10.1039/C5TA05333A ↗
53. Electroless plating of copper on surface-modified glass substrate10.1016/j.apsusc.2011.04.100 ↗
54. Preparation of superhydrophobic films on copper substrate for corrosion protection10.1016/j.surfcoat.2014.01.005 ↗