journal article·2014-10

Preparation and icephobic properties of polymethyltrifluoropropylsiloxane–polyacrylate block copolymers

Xiaohui Li, Yunhui Zhao, Hui Li, Xiaoyan Yuan

Publisher page

Abstract

Abstract Five polymethyltrifluoropropylsiloxane (PMTFPS)–polyacrylate block copolymers (PMTFPS– b -polyacrylate) were synthesized by free radical polymerization of methyl methacrylate, n -butyl acrylate and hydroxyethyl methacrylate using PMTFPS macroazoinitiator (PMTFPS-MAI) in range of 10–50 mass percentages. The morphology, surface chemical composition and wettability of the prepared copolymer films were investigated by transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and water contact angle measurement. Delayed icing time and ice shear strength of the films were also detected for the icephobic purpose. The surface morphologies of the copolymers were different from those of the bulk because of the migration of the PMTFPS segments to the air interface during the film formation. Maximal delayed icing time (186 s at −15 °C) and reduction of the ice shear strength (301 ± 10 kPa) which was significantly lower than that of polyacrylates (804 ± 37 kPa) were achieved when the content of PMTFPS-MAI was 20 wt%. The icephobicity of the copolymers was attributed primarily to the enrichment of PMTFPS on the film surface and synergistic effect of both silicone and fluorine. Thus, the results show that the PMTFPS– b -polyacrylate copolymer can be used as icephobic coating materials potentially.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Synthesis and properties of polymers · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Ice protection of offshore platforms10.1016/j.coldregions.2010.02.006 ↗
2. Verification of icephobic/anti-icing properties of a superhydrophobic surface10.1021/am400429q ↗
3. Effects of contact angle hysteresis on ice adhesion and growth on superhydrophobic surfaces under dynamic flow conditions10.1007/s00396-012-2753-4 ↗
4. Preparation and anti-icing behavior of superhydrophobic surfaces on aluminum alloy substrates10.1021/la400979d ↗
5. Temperature-dependent bouncing of super-cooled water on Teflon-coated superhydrophobic tungsten nanorods10.1016/j.apsusc.2013.04.038 ↗
6. Facile preparation of superhydrophobic coating by spraying a fluorinated acrylicrandom copolymer micelle solution10.1039/C2SM26689J ↗
7. Frost formation and ice adhesion on superhydrophobic surfaces10.1063/1.3524513 ↗
8. Anti-icing performance of superhydrophobic surfaces10.1016/j.apsusc.2011.02.057 ↗
9. Ice-phobic surfaces that are wet10.1021/nn303372q ↗
10. Superhydrophobic surfaces cannot reduce ice adhesion10.1063/1.4752436 ↗
11. Research on the icephobic properties of fluoropolymer-based materials10.1016/j.apsusc.2011.01.003 ↗
12. Evaluation of icephobic coatings-screening of different coatings and influence of roughness10.1016/j.apsusc.2013.06.073 ↗
13. Effects of nano-fluorocarbon coating on icing10.1016/j.apsusc.2012.04.043 ↗
14. Preparation and characterization of silica/fluorinated acrylate copolymers hybrid films and the investigation of their icephobicity10.1016/j.tsf.2012.04.067 ↗
15. Ice-phobic coatings based on silicon-oil-infused polydimethylsiloxane10.1021/am400704z ↗
16. Anti-icing performance of a superhydrophobic PDMS/modified nano-silica hybrid coating for Insulators10.1163/016942411X574826 ↗
17. Hydrophobic and ice-retarding properties of doped silicone rubber coatings10.1016/j.apsusc.2012.11.042 ↗
18. Well-architectured poly(dimethylsiloxane)-containing copolymers obtained by radical chemistry10.1021/cr8001998 ↗
19. Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface10.1016/j.apsusc.2011.02.049 ↗
20. Preparation and evaluation of hydrophobic surfaces of polyacrylate-polydimethylsiloxane copolymers for anti-icing10.1016/j.porgcoat.2013.05.036 ↗
21. Advanced icephobic coatings10.1163/016942410X533372 ↗
22. Interactions between heterogeneous surfaces of polymers and water10.1002/app.1994.070541307 ↗
23. S.V. Perz, C.S. McMillan, M.J. Owen, Wettability of fluorosilicone surfaces, in: D.G. Castner, D.W. Grainger (Eds.), Fluorinated Surfaces, Coatings, and Films, Washington, DC, 2001, pp. 112–128.10.1021/bk-2001-0787.ch009 ↗
24. A review of significant directions in fluorosiloxane coatings10.1007/BF02699599 ↗
25. Synthesis, characterization and in vitro oxidative stability of poly(3,3,3-trifluoropropyl)methylsiloxane modified polyurethaneurea10.1016/j.polymdegradstab.2008.10.022 ↗
26. Control of mesogen configuration in colloids of liquid crystalline polymers10.1039/c0sm00125b ↗
27. Synthesis and characterization of a naphthalimide-dye end-labeled copolymer by reversible addition-fragmentation chain transfer (RAFT) polymerization10.1139/V10-134 ↗
28. Microphase separation behavior on the surfaces of PEG-MDI-PDMS multiblock copolymer coatings10.1016/j.apsusc.2006.06.044 ↗
29. Relationships between water wettability and ice adhesion10.1021/am1006035 ↗
30. Synthesis, surface properties, and morphologies of poly[methyl(3,3,3-trifluoropropyl)siloxane]-b-polystyrene-b-poly(tert-butyl acrylate) triblock copolymers by a combination of anionic ROP and ATRP10.1002/pola.25939 ↗
31. Surface microphase separation in PDMS-b-PMMA-b-PHFBMA triblock copolymer films10.1002/app.32682 ↗
32. On wetting behavior of fluorocarbon coatings with various chemical androughness characteristics10.1016/j.vacuum.2005.04.004 ↗