Electrochemical and XPS analytical investigation of the accelerative effect of bicarbonate/carbonate ions on AISI 304 in alkaline environment
Source abstract
Abstract
Abstract Passivation behavior and surface chemistry of 304 stainless steel in alkaline solution with different HCO 3 − /CO 3 2– concentrations are studied with a combined electrochemical and XPS analytical investigation. Cathodic and anodic reactions are inhibited and accelerated, respectively, attributed to the depletion of acceptable oxygen and variation of passive film properties. Increasing HCO 3 − /CO 3 2– concentration does not alter the bilayer structure but leads to an intensification in electric field strength and composition changes including enrichment of oxidized Cr, increase of Fe(II)/Fe(III) ratio, and decrease of OH − /O 2– ratio. Meanwhile, the film thickness is reduced and the point defect density is increased due to the enhanced film dissolution. High HCO 3 − /CO 3 2– concentration increases the critical chloride concentration of 304 SS in alkaline solution, attributed to the inhibition of the localized acidification within the pits and suppression of the stable pit development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Electrochemical and analytical investigation of passive films formed on stainless steels in alkaline media10.1016/j.cemconcomp.2012.06.002 ↗
2. Corrosion behaviour of corrugated lean duplex stainless steels in simulated concrete pore solutions10.1016/j.corsci.2011.01.050 ↗
3. The passive behaviour of AISI 316 in alkaline media and the effect of pH: a combined electrochemical and analytical study10.1016/j.electacta.2009.10.026 ↗
4. A XPS study of the Mo effect on passivation behaviors for highly controlled stainless steels in neutral and alkaline conditions10.1016/j.apsusc.2012.12.118 ↗
5. Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution10.1016/j.apsusc.2016.12.180 ↗
6. Chloride-induced corrosion resistance of high-strength stainless steels in simulated alkaline and carbonated concrete pore solutions10.1016/j.corsci.2011.12.012 ↗
7. Carbonation-induced corrosion: investigation of the corrosion onset10.1016/j.conbuildmat.2017.12.066 ↗
8. Electrochemical study on the corrosion behaviour of a new low-nickel stainless steel in carbonated alkaline solution in the presence of chlorides10.1016/j.electacta.2014.02.107 ↗
9. The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides10.1016/j.electacta.2011.02.094 ↗
10. The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride10.1016/j.electacta.2012.01.025 ↗
11. Long-term behaviour of AISI 304L passive layer in chloride containing medium10.1016/j.electacta.2005.06.040 ↗
12. Low-nickel stainless steel passive film in simulated concrete pore solution: a SIMS study10.1016/j.apsusc.2010.03.140 ↗
13. Pitting corrosion of pipeline steel in dilute bicarbonate solution with chloride ions10.5006/1.3293540 ↗
14. Corrosion, passivity, and pitting of carbon steel in aqueous solutions of HCO3−, CO2, and Cl−10.5006/1.3316127 ↗
15. The inhibitive effect of bicarbonate and carbonate ions on carbon steel in simulated concrete pore solution10.1016/j.corsci.2014.07.026 ↗
16. Electrochemical behavior of API-X100 pipeline steel in NS4, near-neutral, and mildly alkaline pH simulated soil solutions10.1016/j.corsci.2013.12.020 ↗
17. Corrosion of reinforcing steel in simulated concrete pore solutions: effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
18. Stability of the oxide film on metals in relation to inhibition of corrosion: II* Dual role of the anion in the inhibition of the corrosion of mild steel10.1179/000705969798325497 ↗
19. Effect of carbonation on the electrochemical behavior of corrosion resistance low alloy steel rebars in cement extract solution10.1016/j.conbuildmat.2016.10.003 ↗
20. Electrochemistry and surface chemistry of stainless steels in alkaline media simulating concrete pore solutions10.1016/j.electacta.2008.06.007 ↗
21. Effects of solution temperature on electronic properties of passive film formed on Fe in pH 8.5 borate buffer solution10.1016/j.electacta.2004.02.043 ↗
22. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
23. The effect of simulated concrete pore solution composition and chlorides on the electronic properties of passive films on carbon steel rebar10.1016/j.corsci.2016.01.027 ↗
24. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
25. Proof by UV-visible modulated reflectance spectroscopy of the breakdown by carbonation of the passivating layer on iron in alkaline solution10.1016/0039-6028(95)00429-7 ↗
26. Nickel-free manganese bearing stainless steel in alkaline media—electrochemistry and surface chemistry10.1016/j.electacta.2011.02.049 ↗
27. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
28. Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution10.1016/j.apsusc.2015.11.085 ↗
29. Environmental factors affecting the corrosion behaviour of reinforcing steel: I. The early stage of passive film formation in Ca(OH)2 solutions10.1016/j.corsci.2010.07.035 ↗
30. Corrosion behavior of AZ31 magnesium alloy in the chloride solution containing ammonium nitrate10.1016/j.electacta.2018.05.059 ↗
31. Electrochemical evaluation of the corrosion behaviour of API-X100 pipeline steel in aerated bicarbonate solutions10.1016/j.corsci.2012.01.015 ↗
32. Effect of pH and temperature on the mechanism of carbon steel corrosion by aqueous carbon dioxide
33. Corrosion and inhibition of stainless steel pitting corrosion in alkaline medium and the effect of Cl− and Br− anions10.1016/j.apsusc.2004.08.003 ↗
34. Study of stainless steels corrosion in a strong acid mixture. Part 1: cyclic potentiodynamic polarization curves examined by means of an analytical method10.1016/j.corsci.2017.10.012 ↗
35. Theory of steady-state passive films10.1149/1.2086949 ↗
36. Electrochemical behavior and surface characteristics of pure titanium during corrosion in simulated desulfurized flue gas condensates10.1149/2.1321809jes ↗
37. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
38. Passivity and passivity breakdown of 304 stainless steel in alkaline sodium sulphate solutions10.1007/s10800-004-1709-x ↗
39. Use of EIS, ring-disk electrode, EQCM and Raman spectroscopy to study the film of oxides formed on iron in 1 M NaOH10.1016/S0958-9465(01)00022-1 ↗
40. Electrochemical and passive behaviour of tin alloyed ferritic stainless steel in concrete environment10.1016/j.apsusc.2017.12.243 ↗
41. Changes in the passive layer of corrugated austenitic stainless steel of low nickel content due to exposure to simulated pore solutions10.1016/j.corsci.2009.01.012 ↗
42. Electrochemical impedance spectroscopy for studying passive layers on steel rebars immersed in alkaline solutions simulating concrete pores10.1016/j.electacta.2007.02.012 ↗
43. EIS study of passivation of austenitic and duplex stainless steels reinforcements in simulated pore solutions10.1016/j.cemconcomp.2006.01.012 ↗
44. Passivation model of 316 stainless steel in simulated cooling water and the effect of sulfide on the passive film10.1016/S0169-4332(03)00355-6 ↗
45. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride10.1016/j.corsci.2010.11.010 ↗
46. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
47. Dielectric properties of materials showing Constant-Phase-Element (CPE) impedance response10.1149/2.033306jes ↗
48. Constant-Phase-Element behavior caused by resistivity distributions in films: I. Theory10.1149/1.3499564 ↗
49. Comparison of different methods for measuring the passive film thickness on metals10.1016/j.electacta.2015.12.173 ↗
50. Constant-phase-element behavior caused by resistivity distributions in films II. Applications10.1149/1.3499565 ↗
51. Effect of time on the characteristics of passive film formed on stainless steel10.1016/j.apsusc.2017.03.155 ↗
52. Semiconducting properties of passive films formed on stainless steels: influence of the alloying elements10.1149/1.1838880 ↗
53. Semiconducting properties of passive films formed on nickel–base alloys type Alloy 600: influence of the alloying elements10.1016/S0013-4686(98)00372-7 ↗
54. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in acidified artificial seawater containing thiosulfate10.1149/2.1901713jes ↗
55. An electrochemical impedance study of Alloy-22 in NaCl brine at elevated temperature: II. Reaction mechanism analysis10.1016/j.jelechem.2004.05.032 ↗
56. Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution10.1016/j.corsci.2006.10.032 ↗
57. Effect of electropolishing on corrosion of nuclear grade 316L stainless steel in deaerated high temperature water10.1016/j.corsci.2016.09.002 ↗
58. Effect of pitting nucleation on critical pitting temperature of 316L stainless steel by nitric acid passivation10.1016/j.corsci.2014.11.018 ↗
59. The role of Mo in the chemical composition and semiconductive behaviour of oxide films formed on stainless steels10.1016/S0010-938X(98)00126-7 ↗
60. Growth kinetics of passivating oxide film of Inconel alloy 600 in 0.1 M Na2SO4 solution at 25–300 °C using the abrading electrode technique and ac impedance spectroscopy10.1016/j.electacta.2003.08.010 ↗
61. EIS and XPS study of surface modification of 316LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
62. Capacitance behaviour of passive films on ferritic and austenitic stainless steel10.1016/j.corsci.2004.07.002 ↗
63. The history of the point defect model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
64. The electronic structure of passive films formed on stainless steels10.1016/0010-938X(95)00084-W ↗
65. Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution10.1016/j.electacta.2013.02.024 ↗
66. Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments10.1016/j.corsci.2009.08.002 ↗
67. Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels10.1016/j.corsci.2009.09.003 ↗
68. Kinetics of passive film growth on Alloy 800 in the presence of hydrogen peroxide10.1016/j.electacta.2011.10.029 ↗
69. The effect of deformation on metastable pitting of 304 stainless steel in chloride contaminated concrete pore solution10.1016/j.corsci.2015.11.022 ↗
70. Critical chloride content in reinforced concrete — a review10.1016/j.cemconres.2009.08.006 ↗
71. Perspective—localized corrosion: passive film breakdown vs pit growth stability10.1149/2.1381704jes ↗