Effect of graphene oxide additive on tribocorrosion behavior of MAO coatings prepared on Ti6Al4V alloy
Source abstract
Abstract
Abstract Titanium and its alloys possess the superiority on corrosion resistance and the shortage on wear resistance. Tribocorrosion, a new study orientation concerning both corrosion and wear resistances and fascinating researchers in recent years, has to be considered on the titanium, its alloys and their surface treated materials. In this study, graphene oxide (GO) particles inserted coatings were prepared by micro-arc oxidation (MAO) treatment with various GO concentrations. The composition, morphology and topography were measured to analyze the structure and properties of coatings. Electrochemical impedance spectroscopy (EIS) and polarization measurements were utilized to assess the corrosion resistance of samples. Tribocorrosion behavior was evaluated by the open circuit potential (OCP) and coefficient of friction (COF) evolutions in advance to, during and after reciprocating sliding. The results showed that in GO concentration of 5 mL/L and 10 mL/L, the GO particles were inserted into the MAO coatings and the MAO coating by adding 10 mL/L GO particles possessed best tribocorrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lubricants and Their Additives · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. The effect of microstructure on the mechanical properties of two-phase titanium alloys
2. Ductile titanium alloy with low Poisson's ratio10.1103/PhysRevLett.98.216405 ↗
3. Metallurgy. Origin of dramatic oxygen solute strengthening effect in titanium10.1126/science.1260485 ↗
4. Characterization and diffusion model for the titanium boride layers formed on the Ti6Al4V alloy by plasma paste boriding10.1016/j.apsusc.2016.11.227 ↗
5. Titanium and titanium alloys: fundamentals and applications
6. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
7. Analysis of the growth morphology of TiB and the microstructure refinement of the coatings fabricated on Ti-6Al-4V by laser boronizing10.1021/cg0608099 ↗
8. Structure and tribological properties of TiSiCN coating on Ti6Al4V by arc ion plating10.1016/j.tsf.2017.09.053 ↗
9. Characteristics of surface layers on Ti6Al4V alloy borided with CeO2 near the transition temperature10.1016/j.jallcom.2018.07.365 ↗
10. Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding10.1016/j.jallcom.2018.01.383 ↗
11. Construction of lubricant composite coating on Ti6Al4V alloy using micro-arc oxidation and grafting hydrophilic polymer10.1016/j.msec.2018.04.057 ↗
12. Laser deposition of compositionally graded titanium oxide on Ti6Al4V alloy10.1016/j.ceramint.2018.08.090 ↗
13. Wear and adhesion resistance of duplex coatings deposited on Ti6Al4V alloy using MAO and CFUBMS10.1016/j.surfcoat.2012.10.006 ↗
14. High temperature oxidation behavior of TiO2 + ZrO2, composite ceramic coatings prepared by microarc oxidation on Ti6Al4V alloy10.1016/j.surfcoat.2014.11.031 ↗
15. Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer10.1016/j.jallcom.2015.12.108 ↗
16. Corrosion and tribocorrosion performance of M (M, Ta, Ti) doped amorphous carbon multilayers in Hank's solution10.1016/j.surfcoat.2016.07.078 ↗
17. Plasma electrolytic oxidation coatings on AZ31 magnesium alloys with Si3N4, nanoparticle additives10.1016/j.surfcoat.2017.05.094 ↗
18. Influence of graphene particles on the micro-arc oxidation behaviors of 6063 aluminum alloy and the coating properties10.1016/j.apsusc.2017.06.202 ↗
19. Dielectric breakdown of anodic oxide films on valve metals10.1016/S0010-938X(67)80109-4 ↗
20. Sparking voltages observed on anodization of some valve metals10.1149/1.2411854 ↗
21. Sparking voltages and side reactions during anodization of valve metals in terms of electron tunnelling10.1016/S0010-938X(71)80125-7 ↗
22. Chemically derived graphene oxide: towards large-area thin-film electronics and optoelectronics10.1002/adma.200903689 ↗
23. A preliminary study of surface enhanced Raman scattering immunoassay based on graphene oxide substrate10.1016/j.ijleo.2018.05.093 ↗
24. Ocular toxicity of reduced graphene oxide or graphene oxide exposure in mouse eyes10.1016/j.exer.2018.05.024 ↗
25. Tribocorrosion behavior of biofunctional titanium oxide films produced by micro-arc oxidation: synergism and mechanisms10.1016/j.jmbbm.2015.12.030 ↗
26. Understanding growth mechanisms and tribocorrosion behaviour of porous TiO2, anodic films containing calcium, phosphorous and magnesium10.1016/j.apsusc.2015.02.163 ↗
27. Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray10.1016/j.corsci.2018.04.018 ↗
28. Effect of the graphene oxide additive on the corrosion resistance of the plasma electrolytic oxidation coating of the AZ31 magnesium alloy10.1016/j.corsci.2016.11.007 ↗
29. Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets10.1016/j.corsci.2016.04.004 ↗
30. Healing effects of LDHs nanoplatelets on MAO ceramic layer of aluminum alloy10.1016/j.jallcom.2017.04.016 ↗
31. EIS study of a self-repairing microarc oxidation coating10.1016/j.corsci.2010.10.010 ↗
32. Tribocorrosion behavior of plasma nitrided Ti–6Al–4V alloy in neutral NaCl solution10.1016/S0257-8972(01)01309-3 ↗
33. Surface engineering of Ti6Al4V surfaces for enhanced tribocorrosion performance in artificial seawater10.1016/j.matdes.2016.04.080 ↗
34. Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: part II[J]10.1016/j.apsusc.2010.10.032 ↗
35. A comparison of corrosion, tribocorrosion and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process10.1016/j.apsusc.2014.11.030 ↗
36. Study of the tribocorrosion behaviour of Ti6Al4V – HA biocomposites10.1016/j.triboint.2016.11.029 ↗
37. Tribological performances of highly dispersed graphene oxide derivatives in vegetable oil10.1016/j.triboint.2018.05.004 ↗
38. Tribocorrosion response of the Ti6Al4V alloys commonly used in femoral stems10.1016/j.triboint.2013.09.022 ↗
39. Tribocorrosion behavior of additive manufactured Ti-6Al-4V biomedical alloy10.1016/j.triboint.2017.11.032 ↗