The sensing mechanism of N-doped SWCNTs toward SF6 decomposition products: A first-principle study
Source abstract
Abstract
Abstract In order to monitor the insulation status of SF6-insulated equipment on-line, SOF2 and SO2F2, two typical decomposition products of SF6 under electric discharge condition, are chosen as the target gases to evaluate the type and severity of discharge. In this work, single N atom doping method is adopted to improve the gas sensitivity of single wall carbon nanotubes to SOF2 and SO2F2. Single and double gas molecules adsorptions are considered to completely analyze the adsorption properties of N-doped single wall carbon nanotubes. Calculation results show that N atom doping enhances the surface activity of carbon nanotubes. When gas molecules physically adsorbed on N-doped single wall carbon nanotubes, the weak interaction between gas molecules and N-doped single wall carbon nanotubes nearly not changes the electrical property according to analysis of the density of states and molecular orbitals. While the chemisorption between gas molecules and N-doped single wall carbon nanotubes distinctly decreases the conductivity of adsorption system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Advancements in Battery Materials · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Partial discharge recognition through an analysis of SF6 decomposition products part 1: Decomposition characteristics of SF6 under four different partial discharges10.1109/TDEI.2012.6148499 ↗
2. P. Bolin, H. Koch, Introduction and applications of gas insulated substation (GIS), in: Power Engineering Society General Meeting, 2005, IEEE, IEEE, 2005, pp. 920–926.10.1109/PES.2006.1709113 ↗
3. Correlation analysis between formation process of SF6 decomposed components and partial discharge qualities10.1109/TDEI.2013.6518956 ↗
4. Investigation on SF6 decomposition products in GIS and affecting factors
5. Study on SF6 gas impurities and potential faults diagnosis
6. SF6 decomposition in gas-insulated equipment10.1109/TEI.1986.348921 ↗
7. Detecting characteristics of SF6 decomposed gas sensor for insulation diagnosis on gas insulated switchgears10.1109/T-DEI.2008.4446758 ↗
8. A novel technique for detecting electromagnetic wave caused by partial discharge in GIS10.1109/MPER.2001.4311486 ↗
9. E. Haque, A.B. Darus, M.M. Yaacob, F. Ahmed, Application of acoustic sensing and signal processing for PD detection in GIS, in: International Conference on Information, Communications and Signal Processing, vol. 742, 1997, pp. 745–749.10.1109/ICICS.1997.652077 ↗
10. Partial discharge detection system based on very wide bandwidth pulse current method
11. Partial discharge monitoring of power transformers using UHF sensors Part I: sensors and signal interpretation
12. Location of partial discharge in transformer oil using circular array of ultrasonic sensors10.1109/TDEI.2013.6633698 ↗
13. A simulation of Pd-doped SWCNTs used to detect SF6 decomposition components under partial discharge10.1016/j.apsusc.2014.07.056 ↗
14. Analysis of adsorption properties of typical partial discharge gases on Ni-SWCNTs using density functional theory10.1016/j.apsusc.2016.04.048 ↗
15. Preparation and application of TiO2 nanotube array gas sensor for SF6-insulated equipment detection: a review10.1186/s11671-016-1516-4 ↗
16. Calibration methods of carbon nanotube gas sensor for partial discharge detection in SF610.1109/TDEI.2006.1624280 ↗
17. Development of SF6 decomposition gas sensor10.1016/S0257-8972(03)00095-1 ↗
18. X. Zhang, F. Meng, Z. Wang, J. Li, Gas-sensing simulation of single-walled carbon nanotubes applied to detect gas decomposition products of SF6 in PD, in: Electrical Insulation Conference, 2011, pp. 132–135.10.1109/EIC.2011.5996132 ↗
19. A novel aluminum-doped carbon nanotubes sensor for carbon monoxide10.1016/j.theochem.2006.11.012 ↗
20. Computational study of B- or N-doped single-walled carbon nanotubes as NH3 and NO2 sensors10.1016/j.carbon.2007.05.019 ↗
21. Adsorption sensitivity of Pd-doped SWCNTs to small gas molecules10.1016/j.snb.2010.09.054 ↗
22. Doping effects of B and N on hydrogen adsorption in single-walled carbon nanotubes through density functional calculations10.1016/j.carbon.2005.10.016 ↗
23. Highly sensitive wireless H2S gas sensors at room temperature based on CuO-SWCNT hybrid nanomaterials10.1016/j.snb.2016.03.021 ↗
24. Multi-walled carbon nanotube-based gas sensors for NH3 detection10.1016/j.diamond.2003.11.070 ↗
25. Detection of a CO and NH gas mixture using carboxylic acid-functionalized single-walled carbon nanotubes10.1186/1556-276X-8-12 ↗
26. Selective differential ammonia gas sensor based on N-doped SWCNT films10.1002/pssb.201100067 ↗
27. Synthesis and electrochemical applications of nitrogen-doped carbon nanomaterials10.1515/ntrev-2013-0007 ↗
28. The doping of carbon nanotubes with nitrogen and their potential applications10.1016/j.carbon.2009.10.009 ↗
29. Adsorption of O2, H2, CO, NH3, and NO2 on ZnO Nanotube: a density functional theory study10.1021/jp711105d ↗
30. A comparison of CO adsorption on Pt(211), Ni(211), and Pd(211) surfaces using density functional theory10.1016/j.susc.2004.08.019 ↗
31. Generalized gradient approximation made simple [Phys. Rev. Lett. 77, 3865 (1996)]10.1103/PhysRevLett.77.3865 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Carbon nanotube-metal cluster composites: a new road to chemical sensors?10.1021/nl050167w ↗
34. Oxygen and nitrogen doping in single wall carbon nanotubes: an efficient stable field emitter10.1016/j.jallcom.2017.03.324 ↗
35. Adsorption of gases from SF6 decomposition on aluminum-doped SWCNTs: a density functional theory study10.1140/epjd/e2015-60172-x ↗
36. Oxygen molecule dissociation on carbon nanostructures with different types of nitrogen doping10.1039/C1NR11086A ↗