Molten salt conversion of polyethylene terephthalate waste into graphene nanostructures with high surface area and ultra-high electrical conductivity
Source abstract
Abstract
Abstract The pollution caused by the accumulation of plastic products is a serious emerging threat to the nature and to us. Here, we first report on the structural and thermokinetic characterization of the plastic bottle material. It was found that the pyrolysis of polyethylene terephthalate in air leads to the formation of an amourphose carbon with an exceptional thermal oxidation resistance, based on which an effective and scalable molten salt strategy for green conversion of plastic bottles into a highly conductive nanostructured carbon is proposed. In this process, no complicated equipment or protective gas is required. The nanostructured carbon consisted of crystalline graphitic nanosheets with a thickness of less than 10 nm; and an ultra-high electrical conductivity of 1150 S m−1 at a low bulk density of 1 g cm−3, with an estimated production cost about US $6 kg−1. These characteristics are attractive for various applications including conductive additives to electronic devices. In the light of the fact that the plastic pollution crisis cannot be appropriately resolved without the involvement of short term economic motivations, the proposed molten salt method may provide a sufficient economic driving force towards the use of PET wastes as valuable raw materials, hence protecting the environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Recycling and Waste Management Techniques · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. 2017
2. Polyethylene terephthalate degradation under reactor neutron irradiation
3. Plastics, the environment and human health: current consensus and future trends10.1098/rstb.2009.0053 ↗
4. Microplastics in bivalves cultured for human consumption10.1016/j.envpol.2014.06.010 ↗
5. Marine microplastics10.1016/j.cub.2017.01.043 ↗
6. Trophic transfer of microplastics and mixed contaminants in the marine food web and implications for human health10.1016/j.envint.2018.03.007 ↗
7. Vethaak, Microplastics contamination in molluscs from the northern part of the Persian Gulf10.1016/j.envpol.2017.12.046 ↗
8. Production, use, and, fate of all plastics ever made10.1126/sciadv.1700782 ↗
9. The degradation potential of PET bottles in the marine environment: an ATR-FTIR based approach10.1038/srep23501 ↗
10. Recycling polyethylene terephthalate wastes as short fibers in Strain-Hardening Cementitious Composites (SHCC)10.1016/j.jhazmat.2018.05.046 ↗
11. An approach to the usage of polyethylene terephthalate (PET) waste as roadway pavement material10.1016/j.jhazmat.2014.07.018 ↗
12. Oil sorbents from plastic wastes and polymers: A review10.1016/j.jhazmat.2017.07.072 ↗
13. The impact of co-combustion of polyethylene plastics and wood in a small residential boiler on emissions of gaseous pollutants, particulate matter, PAHs and 1,3,5-triphenylbenzene10.1016/j.chemosphere.2017.12.127 ↗
14. Recent advances in the gasification of waste plastics. A critical overview10.1016/j.rser.2017.09.032 ↗
15. Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification10.1016/j.ijhydene.2014.04.189 ↗
16. Review of catalysts for tar elimination in biomass gasification processes10.1021/ie0498403 ↗
17. Production of nanostructured carbon materials using Fe–Mo/MgO catalysts via mild catalytic pyrolysis of polyethylene waste10.1016/j.cej.2018.08.046 ↗
18. Carbon nanomaterials in different dimensions for electrochemical energy storage10.1002/aenm.201600278 ↗
19. Carbon nanomaterials for high performance supercapacitors10.1016/j.mattod.2013.07.002 ↗
20. Synthesis and applications of carbon nanomaterials for energy generation and storage10.3762/bjnano.7.17 ↗
21. Elastomeric composites based on carbon nanomaterials10.1088/0957-4484/26/11/112001 ↗
22. Design and application of carbon nanomaterials for photoactive and charge transport layers in organic solar cells10.1186/s40580-016-0068-8 ↗
23. Conductive inks of graphitic nanoparticles from a sustainable carbon feedstock10.1016/j.carbon.2016.09.052 ↗
24. Environmental applications of carbon-based nanomaterials10.1021/es8006904 ↗
25. Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
26. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
27. Review of the synthesis, transfer, characterization and growth mechanisms of single and multilayer graphene10.1039/C7RA00392G ↗
28. Defect characterization in graphene and carbon nanotubes using Raman spectroscopy10.1098/rsta.2010.0213 ↗
29. Solar mediated reduction of graphene oxide10.1039/C6RA24696F ↗
30. Valorization of Poly (ethylene) terephthalate (PET) wastes into magnetic carbon for adsorption of antibiotic from water: characterization and application10.1016/j.jenvman.2017.11.047 ↗
31. Structural changes in polyethylene terepthalate (PET) waste materials caused by pyrolysis and CO2 activation10.1260/026361706779849735 ↗
32. Influence of pore size distribution on the adsorption of phenol on PET-based activated carbons10.1016/j.jcis.2016.02.007 ↗
33. Comparative study on composition, structure, and adsorption behavior of activated carbons derived from different synthetic waste polymers10.1016/j.jcis.2011.04.103 ↗
34. PET as precursor of microporous carbons:preparation and characterization10.1016/j.micromeso.2004.12.006 ↗
35. Synthesis of branched, nano channeled, ultrafine and nano carbon tubes from PET wastes using the arc discharge method10.1016/j.wasman.2014.07.004 ↗
36. Processing real-world waste plastics by pyrolysis-reforming for hydrogen and high-value carbon nanotubes10.1021/es402488b ↗
37. Synthesis of carbon nanostructures from high density polyethylene (HDPE) and polyethylene terephthalate (PET) waste by chemical vapour deposition
38. Upcycling: converting waste plastics into paramagnetic, conducting, solid, pure carbon microspheres10.1021/es100243u ↗
39. Green synthesis of graphene from recycled PET bottle wastes for use in the adsorption of dyes in aqueous solution10.1016/j.ecoenv.2017.07.014 ↗
40. Aluminum production process: challenges and opportunities10.3390/met7040133 ↗
41. Toward new technologies for the production of lithium10.1007/s11837-998-0027-x ↗
42. Collection of magnesium in an Mg–Pb alloy cathode placed at the bottom of the cell in MgCl2 electrolysis10.1016/j.jallcom.2006.08.064 ↗
43. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride10.1038/35030069 ↗
44. Novel fluidised cathode approach for the electrochemical reduction of tungsten oxide in molten LiCl–KCl eutectic10.1016/j.elecom.2014.01.022 ↗
45. A novel molten salt electrochemical cell for investigating the reduction of uranium dioxide to uranium metal by lithium using in situ synchrotron radiation10.1107/S1600577517000625 ↗
46. Green production of nickel powder by electro-reduction of NiO in molten Na2CO3–K2CO310.1016/j.ijhydene.2016.06.078 ↗
47. Direct production of TiAl3 from Ti/Al-containing oxides precursors by solid oxide membrane (SOM) process10.1016/j.jallcom.2017.08.213 ↗
48. Nanocatalytic conversion of CO2 into nanodiamonds10.1016/j.carbon.2017.07.040 ↗
49. Preparation of nanodiamonds from carbon nanoparticles at atmospheric pressure10.1039/C5CC00233H ↗
50. Condensed-phase nanotubes10.1038/377687a0 ↗
51. Electrolytic, TEM and Raman studies on the production of carbon nanotubes in molten NaCl10.1016/S0008-6223(03)00020-4 ↗
52. A feasibility study of scaling-up the electrolytic production of carbon nanotubes in molten salts10.1016/S0013-4686(02)00595-9 ↗
53. Electrochemical interaction between graphite and molten salts to produce nanotubes, nanoparticles, graphene and nanodiamonds10.1007/s10853-015-9340-2 ↗
54. Large scale green production of ultra-high capacity anode consisting of graphene encapsulated silicon nanoparticles10.1039/C7TA04335J ↗
55. Green production of carbon nanomaterials in molten salts, mechanisms and applications10.1016/j.diamond.2018.02.003 ↗
56. Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature10.1016/j.rser.2017.10.080 ↗
57. Thorium-based molten salt SMR as the nuclear technology pathway from a market-oriented perspective10.1016/j.anucene.2018.02.004 ↗
58. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
59. Investigation on heat transfer characteristics of molten salt in a shell-and-tube heat exchanger10.1016/j.icheatmasstransfer.2018.05.020 ↗
60. Rapid mass production of two-dimensional metal oxides and hydroxides via the molten salts method10.1038/ncomms15630 ↗
61. Molten salt synthesis of anisometric Sr3Ti2O7 particles10.1016/j.jcrysgro.2007.04.017 ↗
62. Preparation of lithium niobate particles via reactive molten salt synthesis method10.1016/j.ceramint.2013.07.085 ↗
63. Effect of the graphite electrode material on the characteristics of molten salt electrolytically produced carbon nanomaterials10.1016/j.matchar.2011.06.010 ↗
64. Remote atmospheric-pressure plasma activation of the surfaces of polyethylene terephthalate and polyethylene naphthalate10.1021/la802296c ↗
65. X-ray diffraction patterns of graphite and turbostratic carbon10.1016/j.carbon.2007.03.038 ↗
66. Structural evolution of turbostratic carbon: Implications in H2 storage10.1016/j.solidstatesciences.2016.10.017 ↗
67. Nitrogen-doped carbon nanofoam derived from amino acid chelate complex for supercapacitor applications10.1016/j.jpowsour.2016.03.061 ↗
68. Nitrogen- and oxygen-containing activated carbons from sucrose for electrochemical supercapacitor applications10.1039/C5RA06661A ↗
69. Effect of catalytic graphitization on the electrochemical behavior of wood derived carbons for use in supercapacitors10.1016/j.jpowsour.2014.12.030 ↗
70. High temperature oxidation behavior of carbon materials in air10.1016/0008-6223(93)90148-4 ↗
71. Kinetic study of graphite oxidation along two lattice directions10.1016/j.carbon.2005.01.032 ↗
72. Thermal oxidative cutting of multi-walled carbon nanotubes10.1016/j.carbon.2007.07.012 ↗
73. The catalytic behavior of alkali metal carbonates and oxides in graphite oxidation reactions10.1016/0008-6223(75)90006-8 ↗
74. On the oxidation of molten salt electrolytically produced carbon nanomaterials10.1016/j.corsci.2011.09.033 ↗
75. Correlation between microstructure and thermokinetic characteristics of electrolytic carbon nanomaterials10.1016/j.corsci.2012.07.007 ↗
76. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
77. Carbon nanotubes for supercapacitor10.1007/s11671-009-9508-2 ↗
78. Superhydrophobization of cotton fabric with multiwalled carbon nanotubes for durable electromagnetic interference shielding10.1007/s12221-015-5436-1 ↗
79. What if the electrical conductivity of graphene is significantly deteriorated for the graphene–semiconductor composite-based photocatalysis?10.1021/acsami.5b10298 ↗
80. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
81. Porous carbon with a large surface area and an ultrahigh carbon purity via templating carbonization coupling with KOH activation as excellent supercapacitor electrode materials10.1016/j.apsusc.2016.06.176 ↗
82. Biochar-based carbons with hierarchical micro-meso-macro porosity for high rate and long cycle life supercapacitors10.1016/j.jpowsour.2017.11.077 ↗
83. KOH activation of carbon-based materials for energy storage10.1039/c2jm34066f ↗
84. Molten salt corrosion of graphite as a possible way to make carbon nanostructures10.1016/j.carbon.2012.12.076 ↗
85. Towards large scale preparation of carbon nanostructures in molten LiCl10.1016/j.carbon.2014.05.089 ↗
86. Eco-friendly production of high quality low cost graphene and its application in lithium ion batteries10.1039/C5GC02455B ↗
87. Scalable fabrication of highly conductive 3D graphene by electrochemical exfoliation of graphite in molten NaCl under Ar/H2 atmosphere10.1016/j.jiec.2017.03.013 ↗
88. Improvement of stacking order in graphite by molten fluoride salt infiltration10.1016/j.carbon.2014.02.010 ↗
89. Electrochemical graphitization: an efficient conversion of amorphous carbons to nanostructured graphites10.1002/chem.201701620 ↗
90. Structure of non-graphitising carbons10.1179/imr.1997.42.5.206 ↗
91. Evolution of glassy carbon under heat treatment: correlation structure–mechanical properties10.1007/s10853-017-1753-7 ↗
92. Highly graphitized carbon from non-graphitizable raw material and its formation mechanism based on domain theory10.1016/j.carbon.2017.05.086 ↗
93. Electrochemically driven transformation of amorphous carbons to crystalline graphite nanoflakes: a facile and mild graphitization method10.1002/ange.201609565 ↗
94. Evolution with heat treatment of crystallinity in carbons10.1016/0008-6223(95)00127-8 ↗
95. Reduced graphene oxide as a multi-functional conductive binder for supercapacitor electrodes10.1016/j.ensm.2017.12.006 ↗
96. Electrical conductivity of chemically reduced graphene powders under compression10.5714/CL.2010.11.2.090 ↗
97. Preparation of graphitic oxide10.1021/ja01539a017 ↗
98. Characterisation of reduced graphene oxide: Effects of reduction variables on electrical conductivity10.1016/j.mseb.2014.11.002 ↗
99. Functionalization of graphene sheets through fullerene attachment10.1039/c1jm10257e ↗
100. Tuning electrical conductivity and surface area of chemically-exfoliated graphene through nanocrystal functionalization10.1016/j.matchemphys.2012.06.014 ↗