The black and white coatings on Ti-6Al-4V alloy or pure titanium by plasma electrolytic oxidation in concentrated silicate electrolyte
Source abstract
Abstract
Abstract Black TiO 2 has triggered scientific interest due to its unique properties such as enhanced solar-driven photocatalytic activity. In this paper, plasma electrolytic oxidation (PEO) treatment of Ti-6Al-4V alloy has been carried out in concentrated sodium silicate electrolyte. Silica-based black and white TiO 2 coatings respectively have been obtained by controlling the oxidation time. The black coating, which was formed with a short treatment time, shows good corrosion resistance and the black appearance can be attributed to the presence of Ti 2+ and Ti 3+ in the coating. The lower valence titanium ions are absent in the white coatings and they also contain relatively higher Na content compared to the black coatings. The white coatings have great surface roughnesses and super hydrophilicity. The bonding strengths of the black and white coatings on the Ti-6Al-4V alloy are ∼14.4 and 4.3 MPa, respectively. The vanadium contributes little to the black appearance of the coating on Ti6Al4V alloy, since the same phenomena occur for the PEO of a pure titanium substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4 alloy10.1016/S0257-8972(00)00719-2 ↗
2. Microstructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti-6Al-4V alloy in silicate-hexametaphosphate electrolyte10.1016/j.surfcoat.2012.12.003 ↗
3. Two-step plasma electrolytic oxidation of Ti–15V–3Al–3Cr–3Sn for wear-resistantand adhesive coating10.1016/j.surfcoat.2011.04.060 ↗
4. Characteristic, cell response and apatite-induction ability of microarc oxidized TiO2-based coating containing P on Ti6Al4V before and after chemical-treatment and dehydration10.1016/j.ceramint.2008.12.014 ↗
5. Chemical–hydrothermal combined surface modification of titanium for improvement of osteointegration10.1016/j.msec.2008.09.002 ↗
6. Investigation of the voltage and time effects on the formation of hydroxyapatite-containing titania prepared by plasma electrolytic oxidation on Ti–6Al–4V alloy and its corrosion behavior10.1016/j.apsusc.2011.03.103 ↗
7. Microstructure and tribological behavior of a TiO2/hBN composite ceramic coating formed via micro-arc oxidation of Ti–6Al–4V alloy10.1016/j.jmst.2016.06.015 ↗
8. Structure, tribocorrosion and biocide characterization of Ca, P and I containing TiO2 coatings developed by plasma electrolytic oxidation10.1016/j.apsusc.2016.01.145 ↗
9. Composition and mechanical properties of hard ceramic coating containing α-Al2O3 produced by microarc oxidation on Ti–6Al–4V alloy10.1016/j.tsf.2004.06.096 ↗
10. Preparation of black high absorbance and high emissivity thermal control coating on Ti alloy by plasma electrolytic oxidation10.1016/j.surfcoat.2014.05.032 ↗
11. Formation process of composite plasma electrolytic oxidation coating containing zirconium oxides on AM50 magnesium alloy10.1016/S1003-6326(11)60805-4 ↗
12. Towards smart electrolytic plasma technologies: an overview of methodological approaches to process modelling10.1016/j.surfcoat.2015.02.019 ↗
13. New findings on properties of plasma electrolytic oxidation coatings from study of an Al–Cu–Li alloy10.1016/j.electacta.2013.06.022 ↗
14. A mechanism for the growth of a plasma electrolytic oxide coating on Al10.1016/j.electacta.2016.04.186 ↗
15. Key factors determining the development of two morphologies of plasma electrolytic coatings on an Al–Cu–Li alloy in aluminate electrolytes10.1016/j.surfcoat.2016.02.054 ↗
16. The effects of anion deposition and negative pulse on the behaviours of plasma electrolytic oxidation (PEO)—a systematic study of the PEO of a Zirlo alloy in aluminate electrolytes10.1016/j.electacta.2016.12.115 ↗
17. An investigation on pulsed DC plasma electrolytic oxidation of Cp-Ti and its corrosion behaviour in simulated body fluid10.1016/j.surfcoat.2016.02.043 ↗
18. Chemical etching of micro-plasma oxidized titania film on titanium alloy and apatite deposited on the surface of modified titania film in vitro10.1016/j.tsf.2007.08.034 ↗
19. Preparation and tribological properties of self-lubricating TiO2/graphite composite coating on Ti6Al4V alloy10.1016/j.apsusc.2012.05.051 ↗
20. Structure and properties characterization of ceramic coatings produced on Ti–6Al–4V alloy by microarc oxidation in aluminate solution10.1016/S0167-577X(01)00440-2 ↗
21. Characteristic and in vitro bioactivity of a microarc-oxidized TiO2-based coating after chemical treatment10.1016/j.actbio.2007.03.001 ↗
22. Formation of hydroxyapatite within porous TiO2 layer by micro-arc oxidation coupled with electrophoretic deposition10.1016/j.actbio.2009.02.021 ↗
23. In situ impedance spectroscopy of the plasma electrolytic oxidation process for deposition of Ca- and P-containing coatings on Ti10.1016/j.surfcoat.2016.02.035 ↗
24. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
25. Preparation and cytocompatibility of Si-incorporated nanostructured TiO2 coating10.1016/j.surfcoat.2010.03.028 ↗
26. Anodic oxidation of zirconium in silicate solutions10.1016/j.electacta.2012.10.130 ↗
27. Characterization of plasma electrolytic oxidation coatings formed on Mg–Li alloy in an alkaline polyphosphate electrolyte10.1016/j.surfcoat.2011.07.019 ↗
28. Growth mechanism of black ceramic layers formed by microarc oxidation10.1016/j.surfcoat.2007.06.010 ↗
29. Influence of K2TiF6 in electrolyte on characteristics of the microarc oxidation coating on aluminum alloy10.1016/j.cap.2012.03.003 ↗
30. Surface engineering for thermal control of spacecraft10.1179/174329405X50118 ↗
31. Fabrication of multifunctional black PEO coatings on AA7075 for spacecraft applications10.1016/j.surfcoat.2016.09.043 ↗
32. Wear-resistant black decorative coating produced by the plasma electrolytic oxidation method on titanium alloys10.17073/1997-308X-2016-1-44-50 ↗
33. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
34. Black TiO2 for solar hydrogen conversion10.1016/j.jmat.2017.02.001 ↗
35. Properties of disorder-engineered black titanium dioxide nanoparticles through hydrogenation10.1038/srep01510 ↗
36. Effect of discharge pulsating on microarc oxidation coatings formed on Ti6Al4V alloy10.1016/j.matchemphys.2004.10.025 ↗
37. Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: part II10.1016/j.apsusc.2011.10.064 ↗
38. Correlations between the growth mechanism and properties of micro-arc oxidation coatings on titanium alloy: effects of electrolytes10.1016/j.surfcoat.2017.03.021 ↗
39. Study of sintering processes for powder injection molding of TiH2
40. Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium10.1016/j.electacta.2009.06.088 ↗
41. Wear-resistant coatings formed on Zircaloy-2 by plasma electrolytic oxidation in sodium aluminate electrolytes10.1016/j.electacta.2013.11.079 ↗
42. The characterization of oxide based ceramic coating synthesized on Al–Si binary alloys by microarc oxidation10.1016/j.surfcoat.2014.12.031 ↗
43. A comparison of plasma electrolytic oxidation of Ti–6Al–4V and Zircaloy-2 alloys in a silicate hexametaphosphate electrolyte10.1016/j.electacta.2015.03.020 ↗
44. Effects of Na2SO4 and Na2CO3 on sodium-reduction dynamics law of high aluminium iron ores
45. Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti–6Al–4V10.1016/j.surfcoat.2010.04.006 ↗
46. Wagner · 1979
47. Bonding-state characterization of the constituent elements of silicate minerals by X-ray photoelectron spectroscopy10.1039/f19858100485 ↗
48. X-ray photoelectron spectroscopy of thermally treated SiO2 surfaces10.1021/ac00289a033 ↗
49. Titanium nitride oxidation chemistry: an X-ray photoelectron spectroscopy study10.1063/1.351465 ↗
50. Altered layer as sensitive initial chemical state indicator10.1116/1.579258 ↗
51. A comparison of ion and fast atom beam reduction in TiO210.1016/0042-207X(88)90492-7 ↗
52. ESCA studies of framework silicates with the sodalite structure. 2. Ultramarine10.1021/j100084a033 ↗
53. Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy10.1016/S0142-9612(00)00145-9 ↗
54. XPS study of the deposited Ti layer in a magnetron-type sputter ion pump10.1016/j.apsusc.2006.06.033 ↗
55. XPS characterization of anodic oxides grown on biocompatible Ti–50Zr alloy in different acid electrolytes10.1002/sia.2271 ↗
56. Strong metal-carrier interaction in cobalt and nickel-titanium dioxide co-hydrogenation catalysts10.1007/BF00529413 ↗
57. Photoemission study of SiOx(0≤x≤2) alloys10.1103/PhysRevB.37.8383 ↗
58. Study on bioactivity and bonding strength between Ti alloy substrate and TiO film by micro-arc oxidation10.1016/j.tsf.2011.01.223 ↗
59. Matykina · 2012
60. Wei · 1984
61. The microstructure and wettability of the TiOx films synthesized by reactive DC magnentron sputtering10.1016/j.mseb.2008.11.043 ↗
62. Anatase-phase titanium oxide by low temperature oxidation of metallic Ti thin film10.1016/S1359-6462(02)00561-4 ↗
63. Enhanced effect and mechanism of SiO2 addition in super-hydrophilic property of TiO2 films10.1016/S0257-8972(03)00521-8 ↗
64. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
65. Composition and structure of the anodic films on titanium in aqueous solutions10.1016/0013-4686(93)85098-J ↗
66. Structure and composition of passive titanium oxide films10.1016/S0921-5107(97)00043-3 ↗
67. Formation mechanism of porous anodic aluminium and titanium oxides10.1002/adma.200800845 ↗
68. Dependence of the infrared emissivity on SiC content and microstructure of microarc oxidation ceramic coatings formed in Na2SiO3 electrolyte
69. Wuhan University · 1994
70. The effect of colored titanium oxides on the color change on the surface of Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1007/s11665-013-0573-4 ↗